Oricom ECO80 - Manuals

3 Getting Started Pack contents Depending on the model you have purchased this pack should contain the following items:If any of these are missing, please contact Oricom directly. eco80-1/eco800-1 eco800-1/eco800-2 Base units 1 1 Cordless handsets 1 2 Charging cradle 0 1 Power adaptors 1 2 Modular a...

6 Operating the Telephone Operating the Telephone The instructions throughout this guide are for both the telephone base and the cordless handset, unless stated otherwise. Display and explanation of operation sequences Enter digits or letters Press the button shown, briefly 2 x Press the button show...

7 Operating the Telephone Navigating in the menu All the handset functions can be accessed via the menu. Please refer to “Using the menu” on page 11 for information on how to access each function. All descriptions in this operating manual assume that the handset is in Standby mode. Open the main men...

8 Telephone Making a call Enter the phone number (max. 24 digits) Following incorrect input, press to delete the last digit or Dial the phone number It is also possible to press the external call button first to obtain dial tone. The digits entered will then be dialled immediately. End a call End th...

11 Using the menu Using the menu Handset name You can personalise your handset by naming it (max. 9 letters). , 4 or 5 , Open the Menu, select “HS NAME” Delete the current name , Enter new name and confirm it Date/Time , 4 or 5 , Open the Menu, select “DATE/TIME” , Enter the year and confirm , Enter...

12 Using the menu Base Ringer volume There are 5 ringer volume settings available and “OFF” , 4 or 5 , Open the Menu, select “BS RING VOL” VOLUME 3 The current setting is shown 4 and 5 , Select and confirm a ringing tone Boost Memory With this feature set to “ON” , if you use the button, your handse...

13 Phone Book Phone Book Fifty names (50) and phone numbers can be stored in the phone book with a maximum of 12 letters and 24 digits for each entry. * Always enter the area dialling code with each phone book entry. * The phone book entries are managed alphabetically. To go quickly to a phone book ...

14 Caller ID Caller ID If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details). The number of the caller (or name if stored in the P...

15 Caller ID Displaying calls list entries Opens the calls list at most recent entry 4 or 5 Select an entry 1x to 2x To display further information Other messages that you may see in the display, if your telephone network provider supports this service, are: WITHHELD The caller has withheld their nu...

16 Using the Answering Machine (eco800 Only) Answering Machine (eco800 Only) Your answering machine can be ready for use within a few seconds of plugging in the telephone line cord and switching on the mains power. Just follow the steps in this section to set up and use your answering machine. Switc...

17 Using the Answering Machine (eco800 Only) Time saver: This feature can save you the cost of a call when you ring in to listen to your messages from another phone. If your answering machine answers after 2 rings you have new messages, if it answers after 5 rings then there are no new messages. Han...

18 Using the Answering Machine (eco800 Only) Delete a single message/memo Play the message to be deleted 2 sec Delete the message Delete all messages/memos 2 sec When no messages are being played Deletes all old messages Memory Full Should your answering machine become full either during a recording...

21 Advanced Settings Advanced Settings Setting the Recall time Two recall timings are available. Short 100ms (Australia) and Long 600ms (New Zealand). , 4 or 5 , Open the Menu, select “RECALL” SHORT The current setting is shown 4 or 5 , Select and confirm “SHORT” or “LONG” R (Recall) button on PBX p...

24 Troubleshooting Problem Possible cause(s) Solution(s) Bad audio quality (crackles,echo, etc.). 1. Interference from nearby electrical appliance.2. Base unit is installed in a room with thick walls.3. The handset is too far from the base unit.4. If you have Broadband/ADSL you need an in line filte...

26 Default settings Cordless handset The default settings can be restored via the menu. Refer to page 21 for the sequence of menu option selections. Language English Handset name Oricom Ringer melody 8 Ringer volume 3 Boost Memory Off Auto answer Off Recall time 100 ms PIN-Code 0000 Default Settings...

27 Technical Properties Technical Properties Feature Value Standard DECT 1 GAP 2 Power supply (base station) eco80 Input: 100-240VAC 50/60Hz 200mA Output: 6VDC 300mA eco800 Input: 100-240VAC 50/60Hz 200mA Output: 6VDC 500mA Range Outdoors Approx 300m Indoors Approx 50m Standby Up to 100 h Max. talk ...

28 Warranty (Australia) (a) Warranty Oricom International Pty Ltd (Oricom) warrants t h a t t h e pr o d u c t is f r e e f r o m d e fe c t s i n ma t e r i a l s a n d workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty...

30 Index A Adjusting the Handsfree volume ....................................... 9 Adjusting the receiver volume .......................................... 9 Auto talk ....................................................................... 12 B Base Ringing melody .....................................