Omron V720-HS04 - Manuals

v Safety Precautions This chapter provides important information for the safe use of this product. Ensure to read the information carefully before use. In the safety precautions below, severity is categorized as either ”WARNING” or “CAUTION”. WARNING Indicates a potentially hazardous situation which...

vi 警 WARNING Never disassemble, repair, or modify the main unit and cables. z Do not disassemble, repair, or modify this product. Doing so may result in electric shock, fire, or personal injury. Do not handle the device with wet hands. Do not touch the terminals while the device is connected to the ...

vii ・   Locations where the Reader/Writer is exposed to dust, corrosive gas, saline, or flammable gas. ・   Locations where the Reader/Writer is exposed to direct heat. ・   Locations subject to condensation due to high humidity. ・   Locations subject to vibration or impact that exceed the limits outl...

viii Precautions This chapter provides important information for international standards and copyright. Ensure to read the information carefully before use. V720-HS04 conforms to the following laws and standards. This conformity is effective only if V720-HS04 is used with the designated Reader/Write...

TABLE OF CONTENTS ix SECTION 1 Characteristics .................................................................1-1 1-1 Features .................................................................................................................... 1-2 SECTION 2 Specifications and Performance ............

1-1 Features        1-1 1-2 1-1 Features The V720–series Electromagnetic Inductive RFID System is ideal for the construction of highly functional, long–distance wireless ID systems for material control and logistics. The V720-HS04 Antenna is used by connecting it to the V720S-BC5D4A Reader/Writer us...

2-1 Antenna 2-1 2-2 2-1 Antenna 2-1-1 Nomenclature • V720-HS04 No Name Description 1 BNC connector Connects the V720S-BC5D4A Reader/Writer to the Antenna connector for sending/receiving and to the exclusive coaxial cable (sold separately). 2 Detection surface Surface for communication with Tag Anten...

2-1 Antenna 2-1 2-3 2-1-3 Dimensions • V720-HS04 Casing material PVC Back board PVC • Mou nt in g h ol e Mou nt in g h ol e Unit: mm

3-1 Installation of Antenna 3-1 3-2 3-1 Installation of Antenna 3-1-1 Installation Environment Installation Location It is assumed that this product is to be used indoors, or outdoors if there is a roof. Do not install the Antenna in the following locations. • Place exposed to direct sunlight. • The...

3-1 Installation of Antenna 3-1 3-3 3-1-2 Mounting the Antenna Be sure to attach the provided bracket to the Antenna and mount the Antenna with four M6 screws with spring washers and flat washers as shown below. Spring washer Flat washer • Mounting Dimensional Drawing (Ho le) (Ho le) Influence of pe...

4-1 Communications Areas 4-1 4-2 4-1 Communications Areas The following diagram shows the communication area available when a standard Tag is used at ambient temperature, 25°C. The communication area varies depending on Antenna installation conditions, Tag forming conditions, Tag installation condit...

4-2 Influence of Peripheral Metals during Antenna Installation 4-2 4-3 4-2 Influence of Peripheral Metals of Antenna Installation Site Consider the influence of peripheral metals when installing the Antenna. Peripheral metals may greatly lower the communication distance for the Antenna. V720-HS04 to...

4-3 Influence of Tag Angle 4-3 4-4 4-3 Influence of Tag Angle The maximum communications range between the Antenna and Tag will be available if the face of the Antenna and the face of the Tag are parallel to each other. The communications range will be reduced if the Tag is mounted at an angle. Take...

4-4 Effects of Materials on Tags 4-4 4-5 4-4 Effects of Materials on Tags Take into consideration the effects of the mounting location when mounting the Tag. Communications range may be reduced if the Tag is near certain objects. The extent to which the distance will decrease depends on the actual m...

4-4 Effects of Materials on Tags 4-4 4-6 Test Setup • Metal Object • Resin Object Metal Tag Antenna Communication distance Distance betweenback metal and Tag Resin Tag Antenna Communication distance Material: Aluminum plate (thickness = 2.0 mm) Dimensions: 240 x 190 mm

    Revision History A manual revision code appears as a suffix to the catalog number on the front cover of the manual. SRFM- 002A Revision code The following table outlines the changes made to the manual during each revision. Page numbers refer to the previous version.   Revision code Date Revised ...