Omron G7, F7, L7, E7 - Manuals

Page 2 - Type designation

366 3G3RV-P10ST @ -E PLC inverter Specifications by product General specifications Type designation Specifications Item 3G3RV-P10ST8-E 3G3RV-P10ST8-DRT-E PLC core CPM2C-S CPM2C-S Inputs 6 24 VDC inputs 6 24 VDC inputs Outputs 4 sourcing/PNP transistor outputs 4 sourcing/PNP transistor outputs Periph...

Page 5 - Pulse plus direction input mode,

G7/F7/L7/E7 inverter PLC 369 The minimum pulse widths for inputs IN00000 (A-phase input) and IN00001 (B-phase input) are as follows: The minimum pulse width for input IN00002 (Z-phase input) is as follows: Interrupt inputs 3G3RV-P10ST is equipped with inputs that can be used as interrupt inputs (int...

Page 6 - CPU unit component descriptions; • RS-232C and peripheral port settings; Operating mode at startup; PLC status indicators; The following indicators show the operating status of the PLC.; Operation; Effective port settings; ON; Indicator

370 3G3RV-P10ST @ -E CPU unit component descriptions 1. DIP switch • RS-232C and peripheral port settings • Operating mode at startup Pin 2 determines the operating mode at startup only if there isn't a programming device connected to the peripheral port. 2. Input indicators (yellow) The input indic...

Page 8 - G7 + PLC in a water treatment application example

372 3G3RV-P10ST @ -E G7 + PLC Varispeed G7 is the OMRON Yaskawa solution using 3 level PWM control technology that provides lower surge voltage, low leakage current, low bearing current, low acoustic noise and better EMC. By combining with PLC option board, it is the ideal solution for winding/unwid...

Page 9 - Encoder

G7/F7/L7/E7 inverter PLC 373 F7 + PLC The F7 drive is a flux vector control inverter. It is intended to handle every conventional drive application found in a typical industrial manufacturing plant from simple variable torque pumping to sophisticated networked material handling. By combining with PL...

Page 10 - L7 + PLC in lift application example

374 3G3RV-P10ST @ -E L7 + PLC The L7 is the ultimate drive for lift applications up to 3m/s. High starting torque, silent operation, lift-specific operator interface and operation with both AC and PM motors are standard features of the L7 inverter. By combining with PLC option board, it is the ideal...

Page 11 - Ordering information; Varispeed

G7/F7/L7/E7 inverter PLC 375 Ordering information G7/F7/L7/E7 inverter PLC A Varispeed Note: For detailed information please refer to Varispeed G7/F7/L7/E7 series section. B Cables B Computer software Specifications Model Inputs Ouptuts RTC Compobus/S master RS422 port DeviceNet slave 6 4 Yes Yes Ye...

Page 12 - Digital I/O terminals; ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

376 3G3RV-P10ST @ -E C Compobus/S slaves Note: For detailed information about Compobus/S slaves, please refer to catalogue No. Y201-EN2-02 AS. Product Appearance Specifications Model Digital I/O terminals 4 NPN inputs (+ common)4 PNP inputs (– common)4 NPN outputs (– common)4 PNP outputs (+ common) ...

Omron G7, F7, L7, E7 - Manuals

Manuals:

Manual Omron G7, F7, L7, E7

Summary

Omron Manuals