Omega REC-11 - Manuals - manualsarea.com

Page 2 - Automatic Transmitter Verification; REC-11 Operating Instructions; List of Programmable Features:

You received two remote control transmitters to operate your Remote Keyless Entry System. The system LED will flash two times every time the ignition key is turned “on”. This alert will last90 seconds for the first 48 hours after a new installation. The alert will shorten to 10 seconds after thefirs...

Page 3 - Transmitter Functions

Transmitter Functions LOCK BUTTON Pressing the LOCK button will lock all of the doors and engagethe optional starter interrupt;when held operates “Panic”. GREEN LIGHT Illuminates whenever any transmitterbutton is pressed. III BUTTON Pressing the III button for two seconds can be used to activa...

Page 4 - Transmitter Features

Page 4 Concealed Transmitter Codes: Each system includes two transmitters, and up to two additional transmitters can be stored in the unit's memory for your convenience. Each transmitter has its ownunique code. Thus, no other transmitter is coded the same as yours. In fact, no one, including thefact...

Page 5 - Audible Confirmation

Page 5 LED Off ...................................................................... Ignition switch is "On" OR the system is "at rest", indicating that no automatic features will occur. LED On Solid Red ..................................................... System is in "Valet M...

Page 6 - Visual Confirmation

Page 6 turned "off" as a reminder. Single beeps will also accompany the engagement of automatic lockingand starter interrupt circuit engagement. This confirmation can be from the included piezo or thevehicles’ horn. Automatic Transmitter Verification T M The REC-11 has built-in relays which ...

Page 7 - The Valet Switch; Programming Features

Page 7 The Valet Switch is used to place the system into Valet Mode, which is used to stop or interrupt any optional automatic functions, such as Starter Disable, which may be programmed to operate. TheValet Switch, in conjunction with your ignition key, also allows you to override the system in the...

Page 8 - Enter the vehicle normally.; Starter Disable

Page 8 Step 1. Enter the vehicle normally. Step 2. Using your key, turn "on" the ignition. Be prepared to perform thefollowing Step before 5 seconds expires. Step 3. Within 5 seconds, press and release the Valet Switch*. The systemwill be immediately overridden. *Important: If a coded valet ...

Page 9 - Programming Transmitters

Page 9 Programming Transmitters Programming Transmitters To Operate Your System: To use an additional or replacement transmitter, it's unique digital code must first be added to the control module's memory. The dealershipwhere you purchased your system can provide and program transmitters for you, o...

Page 10 - Dealer Programmable Options

Page 10 6) Repeat Step 5 within 10 seconds for each additional transmitter. As each transmitter is learned, the buzzer will sound, which is then followed by beeps indicating the number of thetransmitters learned. The system will exit the Transmitter Programming Mode when theignition switch is turned...