Omega OM5-C - Manuals

23 Module OM5-WMV OM5-WV Input Range ± 10mV to ± 100mV ± 1V to ± 40V Input Bias Current ± 0.5nA ± 0.05nA Input Resistance Normal 200M Ω 650k Ω (minimum) Power Off 40k Ω 650k Ω (minimum) Overload 40k Ω 650k Ω (minimum) Input Protection Continuous 240Vrms Max * Transient ANSI/IEEE C37.90.1-1989 * CMV,...

24 OM5-TX 2-Wire Transmitter Interface Modules ter. This allows a 2-wire loop powered transmitter to be directly connectedto the module without requiring an external power supply. The regulatedsupply will provide a nominal +20VDC at a loop current of 4mA to 20mA. The OM5-TX will provide a 1500V isol...

26 OM5-DT General Purpose Input Modules, with DC Excitation controlled, which allows these modules to share a common analog buswithout the requirement of external multiplexers. The modules are designed with a completely isolated computer side circuitwhich can be floated to ± 50V from Power Common, p...

27 Module OM5-DT Input Range ± 1V to ± 10V Input Bias Current ± 0.05nA Input Resistance Normal 2M Ω (minimum) Power Off 2M Ω (minimum) Overload 2M Ω (minimum) Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 (formerly IEEE-472) Excitation Voltage, V EXC +10.0VDC ± 2mV Excita...

28 OM5-IFI Frequency Input Modules FEATURES ● ACCEPTS FREQUENCY INPUTS OF 0 to 100kHz ● PROVIDES HIGH LEVEL VOLTAGE OUTPUTS ● TTL LEVEL INPUTS ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● ± 0.05% ACCURACY ● MIX AND MATCH OM...

30 OM5-LTC Linearized Thermocouple Input Modules FEATURES ● INTERFACES TO TYPES J, K, T, E, R, S, N, AND B THERMOCOUPLES ● LINEARIZES THERMOCOUPLE SIGNAL ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOU...

32 FEATURES ● ACCEPTS HIGH LEVEL VOLTAGE INPUTS TO ± 10V ● PROVIDES HIGH LEVEL VOLTAGE OUTPUTS TO ± 10V ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1e-1989 TRANSIENT PROTECTION ● 5 POLES OF FILTERING ● 110dB CMR ● 400Hz SIGNAL BANDWIDTH ● ± 0.05% ACCURACY ● ± 0.02% LINEARITY ● MIX AND MATCH...

34 number 50865-5. The captive nut for the 3mm mounting screw can beobtained from PEM (Penn Engineering and Manufacturing), part numberKFS2-M3. The following mechanical drawing is useful if designing circuit boards tomount the OM5 modules. Many sockets are available which accept themounting pins. As...

35 Accessories for OM5 Analog Modules FEATURES ● SINGLE, DUAL, 8-, AND 16-POSITION BACKPANELS ● DIN RAIL MOUNT BACKPANELS ● 19-INCH MOUNTING RACK FOR BACKPANELS ● MULTIPLEXED AND NON-MULTIPLEXED BACKPANELS ● INTERFACE CABLES ● MODULE EVALUATION BOARD ● CABLE-TO-SCREW-TERMINAL INTERFACE BOARD OM5-BP-...

37 ELECTRICAL P1 AND P2 CONNECTOR Connection to the host system is made at connectors P1 and P2. Theseconnectors are electrically equivalent. Two connectors are provided to allowboth analog input and analog output from host systems having individualinput and output connectors. ADJACENT CHANNEL JUMPE...

50 OMX-CJC-C ENCAPSULATED COLD JUNCTION COMPENSATION DESCRIPTION The OMX-CJC-C is the identical circuit used on the OM5-BP backpanelsexcept it is packaged as a component for use in customer designed mountingboards (Figure 24). When interfaced to an OM5-ITC or OM5-LTC module, thetransfer function of ...

2 SCM5B OMEGA® OM5 Series Isolated Signal Conditioning Modules are low cost,high performance, plug-in signal conditioners. Each OM5 module providesa single channel of isolated analog input or output. Input modules interfaceto all types of external sensors. The modules filter, isolate, amplify, andco...

3 VOLTAGE OUTPUT MODULES, 50mA DRIVE CAPACITY (400 Hz BW) MODEL INPUT RANGE OUTPUT RANGE OM5-AV-1-C 0 to +5V ± 5V OM5-AV-2-C ± 5V ± 5V OM5-AV-3-C ± 5V 0 to +5V OM5-AV-4-C 0 to +10V ± 10V OM5-AV-5-C ± 10V ± 10V OM5-AV-6-C ± 10V 0 to +10V OM5-AV-7-C ± 5V ± 10V ACCESSORIES MODEL DESCRIPTION OM5-BP-16-C...

4 OM5-IMV/IV Analog Voltage Input Modules, Narrow Bandwidth FEATURES ● ACCEPTS MILLIVOLT AND VOLTAGE LEVEL SIGNALS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60Hz, 90dB ...

6 OM5-II Analog Current Input Modules FEATURES ● ACCEPTS MILLIAMP LEVEL SIGNALS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60Hz, 90dB AT 50Hz ● ± 0.05% ACCURACY ● ± 0.02...

7 Input Range 0mA to 20mA or 4mA to 20mA Input Resistor Value 20.00 Ω Accuracy ± 0.1% Stability ± 10ppm/ ° C Input Protection Continuous 240Vrms max Transient ANSI/IEEE C37.90.1-1989 CMV, Input to Output Continuous 1500Vrms max Transient ANSI/IEEE C37.90.1-1989 CMR (50Hz or 60Hz) 160dB NMR 95dB at 6...

8 FEATURES ● INTERFACES RMS VOLTAGE (0 – 300V) OR RMS CURRENT (0 – 5A) ● DESIGNED FOR STANDARD OPERATION WITH FREQUENCIES OF 45HZ TO 1000HZ (EXTENDED RANGE TO 20Khz) ● COMPATIBLE WITH STANDARD CURRENT AND POTENTIAL TRANSFORMERS ● INDUSTRY STANDARD 0-5V OUTPUT ● ± 0.25% FACTORY CALIBRATED ACCURACY (A...

10 OM5-IP/IC/IN Linearized 2- or 3-Wire RTD Input Modules FIGURE 1. OM5-IP/IC/IN Block Diagram. circuit which can be floated to ± 50V from Power Common, pin 16. This complete isolation means that no connection is required between I/OCommon and Power Common for proper operation of the output switch. ...

12 Each OM5 4-wire RTD input module provides a single channel of RTD inputwhich is filtered, isolated, amplified, linearized, and converted to a highlevel analog voltage output. This voltage output is logic switch controlled,which allows these modules to share a common analog bus without therequirem...

14 FEATURES ● INTERFACES TO POTENTIOMETERS UP TO 10,000 OHMS ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500 VOLT TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOUS ● 160dB CMR ● 95dB NMR AT 60HZ, 90dB AT 50HZ ● MIX AND MATCH OM5 TYPES ON BACKPANEL ● CSA ...

16 OM5-ITC Thermocouple Input Modules The OM5-ITC modules are designed with a completely isolated computerside circuit which can be floated to ± 50V from Power Common, pin 16. This complete isolation means that no connection is required between I/OCommon and Power Common for proper operation of the ...

18 OM5-WBS Strain Gage Input Modules, Wide Bandwidth FEATURES ● INTERFACES TO 100 Ω THRU 10k Ω , FULL-BRIDGE, HALF-BRIDGE, OR QUARTER-BRIDGE STRAIN GAGES ● HIGH LEVEL VOLTAGE OUTPUTS ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● INPUT PROTECTED TO 240VAC CONTINUOU...

20 FEATURES ● ACCEPTS HIGH LEVEL VOLTAGE OR PROCESS CURRENT INPUT ● UNIPOLAR OR BIPOLAR CURRENT OUTPUT ● 1500Vrms TRANSFORMER ISOLATION ● ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION ● OUTPUT PROTECTED TO 240VAC CONTINUOUS ● 110dB CMR ● 400Hz SIGNAL BANDWIDTH ● ± 0.05% ACCURACY ● ± 0.02% LINEARITY ●...

WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for aperiod of 13 months 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty one (1) year product wa...