Omega M0102 - Manuals

Omega M0102 – Manual in PDF format online.

Manuals:

Manual Omega M0102

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - TO RESET THE DIAL; Use a slotted screwdriver or a; INSTALLATION INSTRUCTIONS; The Model J DialTemp Thermometer is supplied with a; OPERATING INSTRUCTIONS; RANGES AND DIVISIONS:; recommended for continuous use above 800°F.; SPECIFICATIONS; Readings are stabilized within 40 seconds; C A U T I O N

NOTE: Observe that the head and stem must be in the full uprightposition in order to rotate the head. Tighten the bracket bolts securely. 2. Adjust the tilt angle of the head by loosening the two hinge screws and tilting the head to the desired position. Tighten the hinge screws securely. TO RESET T...

Page 3 - External; OVERRANGE PROTECTION:; Polished Type 302 stainless steel; Figure 1. Dimensions Model J

RECALIBRATION: External 1 ⁄ 4 " nut reset screw OVERRANGE PROTECTION: 50% up to 500°F MATERIALS: CONSTRUCTION: Stainless steel welded construction (rust andcorrosion-proof, leakproof, hermetically sealed) PRESSURE RATING: Rated to 1,000 PSI. Use of thermowell isrecommended for higher pressures o...

Page 4 - RETURN REQUESTS / INQUIRIES; OMEGAnet

M0102/0902 It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of itsproducts to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information c...

Omega Manuals