Omega HHT=1501 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS; Installation of Window; Description of Windows

TABLE OF CONTENTS 1. SPECIFICATIONS ...................................................................................... 1 2. PANEL FUNCTIONS ................................................................................... 2 3. OPERATING INSTRUCTION ................................................

Page 9 - OPERATING INSTRUCTION

Page 10 - e. Press the START button to turn on tachometer.

66 3.1. Normal Operation a. Install four 1.5V AA size batteries. b. Cut off a piece of reflective tape of size 1.0 cm x 1.4 cm (optimalsize) c. Wipe off oil or stains from the surface where reflective tape will beadhered. d. Stick the self-adhesive re flective tape on the object whoserotational spee...

Page 11 - and fasten the screw.; Do not exceed the speed limit of 29999 rpm when using

77 3.2. Using the Mechanical Adaptor (Option RM1502) a. Select proper rubber head.b. Attach the mechanical adaptor to the unit. and fasten the screw. c. Press the unit button (left button) to select RPM / ( instead of RPMonly). The auxiliary LED will be turned on while the main LED will beturned off...

Page 15 - RPM; rpm

1111 3.8. Measuring Slow Rotating ObjectsIf the rotating speed of the object which you are measuring is veryslow, it is recommended that you use a tripod to hold the tachometerin place and use multiple pieces of tape for more accurate result. If multiple pieces of tape are used, each piece of tape s...

Page 19 - menu and choose; button, then select

1515 5. Installation of Window TM Application Software (RM-1501) 5.1. For Windows 3.1 A. Start Microsoft TM Windows TM B. Insert disk in drive A (or B)C. From Program Manager , select File menu and choose Run D. Type a:\setup (or b:\setup) and press Enter key 5.2. For Windows 95 A. Start Windows TM ...

Page 20 - Main Window

1616 6. Description of Windows TM Application Program (RM-1501) Main Window : When the program is executed, the program automatically search for connectedtachometer or available serial port. If no serial port is available, then a messageof "No communication port" will be displayed, and the p...

Page 21 - VIEW FILE; Indicate how many blocks of records have been read.

1717 VIEW FILE : If the View option under FILE in the Main Window is selected, a view window willbe shown as above, and the users can review your ASCII data file. If a printer isconnected to the PC, users can print out content selectively.File: Open users data file by selecting this menu. Users will...

Page 22 - Indicate the current record number being selected.; DISPLAY

1818 Selected: Indicate the current record number being selected. DISPLAY : DISPLAY menu has four options: DIGITAL, ANALOG, LIST, and GRAPHIC. DIGITAL: If this option is selected or CTRL+D is pressed, a window, which emulatesmultimeter's LCD display, shall appears on the screen. ANALOG:

Page 24 - Option; will be displayed in screen.

2020 the minimum and maximum value for the Y (vertical) axis. Option : If you select Option, a pull down menu will show three options:Sample Rate, Baud Rate. Upper Limit: Enter upper limit. If upper limit is exceeded, a OVER message will be displayed in screen. Lower Limit: Enter lower limit. If dis...