Omega FCLTX-100 - Manuals

SECTION 3.0 SENSOR PREPARATION FIG. 2 3.0 FREE CHLORINE SENSOR ASSEMBLY. The Free Chlorine Sensor is shipped with the membrane cap pre-installed and covered with a cap with water inside to keep the membrane wet. Make sure to keep sensor cap, anode and cathode inside the sensor body, away oily or gre...

Power Supply PLC, DVM,... sensor red wire sensor black wire FIG. 3 P R O D U C T I N S T R U C T I O N S H E E T 6.0 ELECTRICAL INSTALLATION. The sensor produces an ap-proximate output of 4 mA in air and 20mA at the top range of free chlorine output (0-2ppm, 0-5ppm, 0-10ppm). NOTE: The supply voltag...

ZERO READ ClO2 C L O 2 to Increase output to Decrease output SECTION 8.0 CALIBRATION FIG. 6 SECTION 9.0 SENSOR STORAGE IMPORTANT NOTE: SENSORS ARE SUPPLIED FACTORY CALIBRATED WITH A 4-20mA SIGNAL OUTPUT CORRESPONDING TO THEIR SPECIFIC RANGE (0-2, 0-5 OR 0-10ppm). SPAN CALIBRATION IS NECESSARY WHEN R...