Omega 850i - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS; Arming Bypass

Page 48 Page 1 TABLE OF CONTENTS About Your New Crime Guard System .................................. 3-5 Status Light, Valet Switch, Transmitter & Transceiver Using Your Crime Guard System ........................................... 6 Remote Arming By Transmitter or Transceiver ...................

Page 5 - Other Omega Echo Notes:; FEATURES PROGRAMMING CHECKLIST; Repeat - Steps 2 and 3 for each remaining feature to be changed; ABOUT YOUR NEW CRIME GUARD SYSTEM; Valet

Page 46 Echo is configured for “MUTE” operation (vibrates instead chirping), then inprogramming it will not play the musical melodies. Instead, it vibrates whenthe remote starting Start Melody and Stop Melody are accessed for program-ming. Other Omega Echo Notes: • The system will only transmit a si...

Page 7 - Time Adjust To set the Echo’s clock time.; After 5 seconds the Echo chirps twice release the button; OR; Press and release the button

disarming with the transmitter/transceiver will unlock the doors unless thesystem is activated and sounding. • “VALET” indicates Alarm Valet Mode, replacing the “ARM” or “DISARM” icons. A musical tone occurs when placing the system into Alarm Valet Mode. • When “BAT LOW” appears the transceiver’s 1....

Page 8 - There are three methods of Arming the security system:; II; USING YOUR CRIME GUARD SYSTEM; REMOTE ARMING BY TRANSMITTER OR TRANSCEIVER; Upon Arming the System will:; Step 1 Turn the vehicle’s ignition “on”.; PROGRAMMING TRANSMITTERS

Arming the Crime Guard system turns on the antitheft protection, disables the vehicle’s starter and locks the doors (provided an interface is installed). Once thesystem is Armed , any intrusion attempt will Activate it, sounding the siren and flashing the lights to attract attention. Disarming the s...

Page 9 - LAST DOOR ARMING BY EXITING THE CAR; Upon Arming with the Echo Transceiver, it will:; Stick Shift Remote Starting; This feature changes the parameters of the 850i; Programming Stick Shift Remote Starting:; The operation of this; Turbo Timer; Programming Turbo Timer:

Arming Bypass: When arming the system using the transmitter or transceiver, if any pro- tected zone or sensor circuit is in a violated condition, the affected zone orcircuit will be automatically bypassed. This is “Arming Bypass”, which allowsthe system to still arm and protect the other normal, non...

Page 10 - The Last Door Arming process:; by using the transmitter or transceiver.; To temporarily prevent the system from arming itself:; Feature #29 “Tach Wire” or “Tachless” Starter Operation; Programming the Tach Wire or Tachless feature:; Extended Starter Cranking Time; (Factory Default Setting Minimum); setting. The Crime Guard 850i; Programming Extended Starter Output Time:

The Last Door Arming process: 1- When the vehicle’s ignition has been turned off, the system waits until a door is opened. When the door is closed, or when the last door is closed whenmore than one door is opened, the siren will chirp twice, the parking lightswill flash twice, and the Status Light w...

Page 11 - SYSTEM ARMED & ACTIVATED; Gasoline Or Diesel Engine; sequence for remotely starting vehicles with a diesel engine.; Total Closure Lock Output

While the system is in the Armed state: • The Status Light will be flashing slowly Red to confirm that the system is armed, and also serve as a visual deterrent. • The starter interrupt circuit is engaged.• All protected zones are being monitored for intrusion attempts. Should an Activation into the...

Page 12 - Programming Door Lock/Unlock Pulse Duration:; Programming Transmitter 1 or 2 Button Operation:; Double Unlock Pulse; There are three methods of Disarming the security system:; DISARMING THE SYSTEM

Page 39 Feature #24 Door Lock/Unlock Pulse Duration (Factory Default Setting .8 Second) This feature, for the installer’s use, offers the selection of a .8 second or a 3 second pulse duration of the system’s doorlock outputs. Certain vehicles havepower doorlocking systems which are vacuum operated, ...

Page 13 - Upon Disarming with the Echo Transceiver, it will:; Soft or Loud Horn Confirmation Chirps; Programming the Chirp Confirmation:; Or 2 Button Arming / Disarming; (Factory Default Setting 2 Button Operation)

Page 11 Safety Disarm Feature: Pressing and releasing the “Disarm/Unlock button while the system is activated in the alarm condition will disarm the system, but the doors will re-main locked. This is the “Safety Disarm” feature, which allows the vehicle toremain secure, even though an activated syst...

Page 14 - Echo Transceiver Activation Alert:; Programming Preactivation:; Steady Siren or Pulsed Horn Output; (Factory Default Setting Steady Siren); Feature #19 Steady/Flashing Lights During Remote Start; Programming Steady or Flashing Parking Lights:

Page 12 Automatic Rearming: Automatic Rearming is a programmable feature which ensures that your system is never inadvertently disarmed. It is possible to accidentally or unknowinglyoperate the transmitter from a pocket or purse. You may not even be aware of anaccidental disarming due to the enhance...

Page 15 - Programming Transmitter Activated Anti Car-Jacking:; Chirp Confirmation; Feature #18 Remote Start Run Time 10 Or 20 Minutes; (Factory Default Setting 10 Minutes); Programming 10 or 20 Minute Run Time:; DISARMING BY EMERGENCY OVERRIDE; To Disarm the System without using a Transmitter:; Step 2 Using the ignition key, turn the vehicle’s ignition on.; will immediately disarm.

the Vehicle Recovery operation from the transmitter or transceiver in the eventthat you are forced from your car. “Remote Activated” Vehicle Recovery is onethree methods of activating this feature, which is explained on page 27. Programming Transmitter Activated Anti Car-Jacking: Follow Steps 1 to 4...

Page 16 - Ignition Activated Vehicle Recovery; Programming Ignition Activated Vehicle Recovery:; Remote Activated Vehicle Recovery; Programming Door Activated Vehicle Recovery:; ENHANCED REMOTE PANIC; To Activate “Enhanced Remote Panic”:; door (be ready for the system to activate to an alarm condition).; Step 2 Using the ignition key, turn the vehicle’s ignition switch on.; of times that have been programmed for stage #1.

Page 35 Feature #14 Ignition Activated Vehicle Recovery (Factory Default Setting Off) The Vehicle Recovery feature activates the system into an alarm condition automatically in the event that you are forced from your car. “Ignition Activated”Vehicle Recovery is one three methods of activating this f...

Page 17 - Doors Lock With Last Door Arming; Programming Doors Lock With Last Door Arming:; Doors Lock With Automatic Rearm; Programming Open Door Bypass Of Ignition Locking:; The electronic siren will sound.; AUXILIARY OUTPUTS

Page 34 Feature #12 Doors Lock With Last Door Arming (Factory Default Setting Off) This feature adds the automatic locking of the doors to feature #4, Last Door Arming. If this feature is turned on, the doors will lock when the system becomesarmed 30 seconds after closing the last door. Feature #4 m...

Page 18 - Auxiliary Output Notes:; being on or off, and regardless of the security system’s status.; Feature #9 Unlock #1 When Ignition Is Turned Off; Programming Unlock #1 When Ignition Is Turned Off:; Unlock #2 When Ignition Is Turned Off; Programming Unlock #2 When Ignition Is Turned Off:; Doors Lock When Ignition Is Turned On; Programming Doors Lock When Ignition Is Turned On:

* An optional doorlock interface must be installed. When Auxiliary #2 is operated, all of the doors will unlock, even if the vehicle is configured with Driver’s Door Priority. To Activate Auxiliary Output #2: Press & Hold for 3 Seconds the “Auxiliary #2 Output” Button ( II ) To Activate Auxiliar...

Page 19 - Prewarning Detection Circuit:; To Silently Arm or Disarm the System:; SILENT ARMING AND DISARMING; Programming Automatic Rearming:; Feature #6 Auxiliary Output #2 Also Disarms System; Programming Auxiliary Channel #2 Disarms System:; Feature #7 Parking Light Illumination Upon Disarm; Programming Parking Light Illumination Upon Disarm:

Sensors: The Crime Guard 850i 4 e security system is equipped with a Glass Breakage and Dual-Zone Infrasonic Impact Sensor to increase the effectivenessof the system. The impact sensor is just one in a comprehensive line of availablesensors. Other available options are: piezo shock sensors, and micr...

Page 20 - Last Door Arming; after the vehicle’s last door is closed.; Programming Last Door Arming:; 0 or 60 Second Alarm Duration; (Factory Default Setting 60 Seconds); Changing the Alarm Duration:; REMOTE SENSOR BYPASS; To Activate Remote Sensor Bypass:; The remote engine starting feature should not be used when; Your Crime Guard 850i; REMOTE ENGINE STARTING; Remote Sensor Bypass allows the option of

Feature #4 Last Door Arming (Factory Default Setting Off) This feature configures the system to automatically Arm itself 30 seconds after the vehicle’s last door is closed. Programming Last Door Arming: Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released four time...

Page 21 - To Activate Remote Starting:; will play, and the “crossed out key” icon will appear.; AND; SecureCode; How to custom program a new SecureCode:; Once the system is disarmed, if Alarm Valet Mode is desired, without

Page 19 THE PARKING LIGHTS WILL ILLUMINATE* To Activate Remote Starting: THE ENGINE STARTS To remote start the vehicle:1- Press and release together the transmitter or Echo transceiver’s “Arm/Lock” and “Disarm/Unlock” buttons. The system will respond first by rapidlyflashing the Status Light Green, ...

Page 23 - To Enter Programing Mode:

Pit-Stop Feature: This feature allows you to turn off the ignition switch, remove your keys, leave the vehicle and lock your doors while leaving the en-gine running. To use this feature, have the engine running normally from theignition switch, have the gear selector in “park”, and your foot off of ...

Page 24 - VEHICLE RECOVERY; Level #1: Vehicle Recovery activated by the vehicle’s ignition:; lll; UNAUTHORIZED TRANSMITTER ALERT &; UTOMATIC; Automatic Transmitter Verification; In normal everyday use, for a; Unauthorized Transmitter Alert; Anytime the system has a transmitter

VEHICLE RECOVERY Your system is equipped with three separately programmable Vehicle Recoveryprotection features, which also provide Anti-Carjacking protection. The VehicleRecovery operation may be selectively activated by the ignition, by an open door,or by the transmitter or Echo transceiver. How I...

Page 25 - ALARM VALET & STARTING VALET MODES

and pause to indicate which protected zone was violated while the system is stillarmed, after it’s disarmed, and until the vehicle’s ignition is turned on. Thesystem’s Zone Violation memory can store two consecutive zone violations. Ifthere have been multiple violations, the Status Light will replay...

Page 26 - STATUS INDICATOR LIGHT

Page 25 The Status Light visually confirms the status of the system and provides a high level of visual deterrence. Two colors are shown- Red for security operations, andGreen for remote starting operations. Combinations of both colors are seen whenthe two operations are occurring together. The Stat...