Omega 533i 3 - Manuals - manualsarea.com

Page 2 - OPERATION MANUAL; TABLE OF CONTENTS

COPYRIGHT 1999: OMEGA RESEARCH & DEVELOPMENT, INC. OPERATION MANUAL 533i 3 Page 2 TABLE OF CONTENTS About Your New Crime Guard System ................................. 3 Using Your Crime Guard System ........................................... 4 Remote Arming By Transmitter ........................

Page 3 - ABOUT YOUR NEW CRIME GUARD SYSTEM; USING YOUR CRIME GUARD SYSTEM; There are two methods of Arming the security system:; REMOTE ARMING BY TRANSMITTER

ABOUT YOUR NEW CRIME GUARD SYSTEM Congratulations on your purchase of a new Crime Guard security system. Crime Guard systems combine the benefits of easy-to-use convenience with“no nonsense” protection of person and property. Please review this guideto become familiar with your Crime Guard vehicle s...

Page 5 - the silent arming procedure is followed.; LAST DOOR ARMING BY EXITING THE CAR; Last Door Arming; * An optional doorlock interface must be installed; Notes; arming by using the transmitter.

Arming Bypass: When arming the system using the transmitter, if any protected zone orsensor circuit is in a violated condition, the affected zone or circuit will beautomatically bypassed. This is “Arming Bypass”, which allows the sys-tem to still arm and protect the other normal, non-violated zones....

Page 7 - SYSTEM ARMED & ACTIVATED; There are three methods of Disarming the security system:; DISARMING THE SYSTEM; -Flashing rapidly = Automatic Rearming feature is in progress.; REMOTE DISARMING BY TRANSMITTER; Safety Disarm Feature; Pressing and releasing the Large Upper Button while the system is

While the system is in the Armed state: • The Status Indicator Light will be flashing slowly to confirm that the system is armed, and also serve as a visual deterrent. • The starter interrupt circuit is engaged.• Protected zones are being monitored for intrusion attempts. Should an activation into t...

Page 9 - Activation Alert; ignition is turned on.; How It Works; Safety Disarm is a temporary “one time” operation which occurs only; Automatic Rearming Notes; DISARM normally: Press & Release the Large Upper; DRIVER’S DOOR PRIORITY UNLOCKING; To Disarm the System & Unlock the Driver’s Door:

Page 9 Activation Alert : If the system experiences an alarm condition and resets itself, upon disarmingthe siren will chirp three times and the parking lights will flash three timesinstead of the normal one chirp and one light flash. Additionally, the StatusIndicator Light will be flashing a “Zone ...

Page 11 - To Disarm the System without using a Transmitter:; Step 2. Using the ignition key, turn the vehicle’s ignition on.; DISARMING BY EMERGENCY OVERRIDE; Upon Activating Panic:

Emergency Override: In the event that your transmitter is lost, damaged, or its batteries havebecome exhausted, the Valet Switch and the vehicle’s ignition key may beused to disarm the system. Please note that for this operation the pressing ofthe Valet Switch may be customized; this is the SecureCo...

Page 13 - * An optional doorlock interface must be installed. When Auxiliary; tion being on or off, and regardless of the security system’s status.; EASY VALET MODE; This allows you to turn off all off the “alarm” operations; To Enter “Easy Valet” Mode:; - To remind the user that the system in Easy Valet mode, the siren will; To Exit “Easy Valet” Mode:

* An optional doorlock interface must be installed. When Auxiliary Output #2 is operated, all of the doors will unlock, even if the vehicle isconfigured Driver’s Door Priority. doors and disarming of the system may be programmed to not operate. Thefinal output, Auxiliary Output #3 cannot affect the ...

Page 15 - STATUS INDICATOR LIGHT; Security System Status:; DUAL-ZONE IMPACT SENSOR; REMOTE SENSOR BYPASS; * An optional doorlock interface must be installed.

STATUS INDICATOR LIGHT The Red Status Indicator Light visually confirms the status of the system andprovides a high level of visual deterrence. Additionally, the Status IndicatorLight is also part of the patented Automatic Transmitter Verification featureand the Zone Violation Code feature. The Stat...

Page 17 - the system’s; Level #1: Vehicle Recovery activated by the vehicle’s ignition:; VEHICLE RECOVERY

BACKUP BATTERY This security system is equipped with a backup battery inside the control module. The backup battery will provide an alternative power source tooperate the Crime Guard system if the vehicle's battery is disconnected. Abuilt-in protection circuit will not allow the backup battery to su...

Page 19 - Audible ATV; Visual ATV; Personal security advisement:; To Enter Programing Mode:

A UTOMATIC T RANSMITTER V ERIFICATION The patented ATV TM technology, which is standard on all Crime Guard models, is the only defense against an inherent weakness found in anyremote-controlled vehicle security system. In all such systems, allowanceis made for multiple transmitters to operate the sy...

Page 21 - Transmitter Programming Mode; ’s PROGRAMMABLE FEATURES

Page 21 To Change a Feature: Step 5: After accessing the desired feature, within 10 seconds Press &Release either the transmitter’s Large Upper Button or the SmallLower Button.- Pressing the Large Upper Button turns the feature on; the siren will chirp once and the Status Light will turn on. - P...

Page 23 - SecureCode Programming Mode; The “as received” factory default setting of “1 press” is the most; To custom program a new SecureCode:; If no additional features need to be programmed, exit Programming; Chirp Confirmation; This feature allows the option of a 30 or 60 second Alarm Duration,; Changing the Alarm Duration:; (Factory Default Setting On); Programming Automatic Sensor Zone Bypass:

Page 23 Feature #2 SecureCode Programming Mode (Factory Default Setting: 1 Press) SecureCode is a unique patented feature which allows you to custom select the number of Valet Switch presses which would be required in orderto perform an Emergency Override. Instead of “1 press” of the Valet Switch,a ...

Page 25 - Auxiliary Output #2 Also Disarms System; the system at the same when it is used.; Programming Auxiliary Channel #2 Disarms System:; seconds after the vehicle’s last door is closed.; Programming Last Door Arming:; circuit; Programming Starter Interrupt Operates In Valet Mode:

Feature #6 Auxiliary Output #2 Also Disarms System (Factory Default Setting On) This feature configures the Auxiliary Output #2 to automatically Disarm the system at the same when it is used. Programming Auxiliary Channel #2 Disarms System: Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch ...

Page 27 - Door Lock/Unlock Pulse Duration; This feature offers the selection of a .8 second or a 3 second pulse; Programming Door Lock/Unlock Pulse Duration:; This form of the Vehicle Recovery feature gives you the option of; Programming Transmitter Activated Anti Car-Jacking:

Feature #11 Door Lock/Unlock Pulse Duration (Factory Default Setting .8 Second) This feature offers the selection of a .8 second or a 3 second pulse duration of the system’s doorlock outputs. Certain vehicles have powerdoorlocking systems which are vacuum operated, and thus require a longeroutput pu...

Page 29 - Programming Automatic Rearming:; he siren will chirp once) or the Small Lower; turn the Automatic Rearming feature off; Feature #16 Doors Lock With Automatic Rearm

Programming Automatic Rearming: Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed andreleased fifteen times. The system’s response will be fifteen siren chirps, andthe Status Light flashing fifteen times, pausing, then repeating. Within 10seconds, press and release the trans...

Page 31 - (Factory Default Setting 1 Button Operation); Programming Transmitter 1 Or 2 Button Operation:; TRANSMITTER “2 BUTTON” OPERATION

Page 31 Feature #20 Unlock #2 When Ignition Is Turned Off (Factory Default Setting On) As explained for the previous feature, this feature controls the automatic unlocking of all doors except the driver’s door if Driver’s Door Priority isinstalled. Programming Unlock #2 When Ignition Is Turned Off: ...

Page 33 - To Disarm the System:; To Activate “Enhanced Panic”:; “Enhanced Panic” allows you to activate Remote; To Silently Arm and Disarm the System:; Silent Arming and Silent Disarming are both operated

Page 33 * An optional doorlock interface must be installed THE PARKING LIGHTS WILL FLASH: ONCE TO CONFIRM DISARMING THE SIREN WILL CHIRP ONCE TO CONFIRMDISARMING THE DOORS WILL UNLOCK* To Disarm the System: 3 Button Transmitter Press & Release the Small Center ButtonWith Driver’s Door Priority, ...

Page 35 - To Activate Remote Sensor Bypass:; REPLACEMENT TRANSMITTERS; To order transmitters from Omega direct, please use the form below,; My name and address is:

Page 35 To Activate Remote Sensor Bypass: 2 1 3 Button Transmitter Press & Release the Large Upper Button to Arm, then Press & Release theSmall Lower Button OR 2 1 THE SIREN WILL CHIRP TWICE TO CONFIRM ARMING THE SIREN THEN CHIRPS ONCE TO CONFIRM SENSOR BYPASS THE DOORS WILL LOCK UPON ARMING...

Page 37 - “Ebony”; The optional 4 Button; FEATURES PROGRAMMING CHECKLIST; This checklist will assist you when programming features. Before; Step 1 - Turn the ignition “off”, and press the Valet Switch 5

Page 37 Standard 3 ButtonTransmitters- “Rosewood” part number: #119-05R “Ebony” part number: #119-05B Optional 4 ButtonTransmitter- part number: #105-05(Black finish only) The optional 4 Button transmitter is ideal for use withthe “2 Button Operation” featureoffered by your Crime Guardsystem. Please...

Page 39 - If no programming activity occurs within a 10 second; The system exiting features Programming Mode; L I M I T E D L I F E T I M E W A R R A N T Y

Page 39 # FEATURE DEFAULT 1 TRANSMITTER PROGRAMMING 2 SECURECODE PROGRAMMING 1 press- see page 23 3 Chirp Confirmation ON (large upper button) 4 30 / 60 Second Activated Alarm Cycle 30 Seconds (large upper button) 5 Automatic Sensor Zone Bypass ON (large upper button) 6 Auxiliary Output #2 Also Disa...