Nortel SFINA286V13 - Manuals

Page 5 - Introduction; CWDM GBIC description; Figure 1

5 Introduction This section describes how the Nortel Networks* coarse wavelength division multiplexed Gigabit Interface Converter (CWDM GBIC) works within the optical routing system. It also provides a list of CWDM GBICs by wavelength and shows how they are labeled and color-coded. CWDM GBIC descrip...

Page 6 - Figure 1 CWDM GBIC; CWDM GBIC labeling; Figure 2

6 Figure 1 CWDM GBIC CWDM GBIC labeling Figure 2 shows how Nortel Networks CWDM GBICs are labeled, including color-coding by wavelength. Figure 2 Nortel Networks CWDM GBIC label 10292FA Serial number 10396EA Bar code AA1419005 1000BASE-WDM GBIC 1470nm Single Mode SFINA286V13 Wavelength Wavelength co...

Page 7 - CWDM GBIC model numbers; Table 1; Model number

7 CWDM GBIC model numbers Table 1 lists the CWDM GBIC model numbers by wavelength and matching multiplexers in the CWDM optical routing system. The system uses color matching for simplifying connections between the CWDM GBIC and the multiplexer. Note: When you contact Nortel Networks about this prod...

Page 8 - Installing a CWDM GBIC; Fiber optic equipment can emit laser or infrared

8 Handling, safety, and environmental guidelines Before installing a CWDM GBIC, read the following handling, safety, and environmental guidelines: • CWDM GBICs are static sensitive. To prevent damage from electrostatic discharge (ESD), follow your normal board and component handling procedures. • CW...

Page 9 - Table 1 on page 7

9 To install a CWDM GBIC in the switching module: 1 Remove the CWDM GBIC from its protective packaging. 2 Verify that the CWDM GBIC is the correct wavelength for your network configuration ( Table 1 on page 7 ). 3 Remove the dust cover from the CWDM GBIC’s optical bores. 4 To prevent damage during h...

Page 10 - Figure 3 Inserting a; into the switching module; Removing a CWDM GBIC

10 Figure 3 Inserting a CWDM GBIC into the switching module Removing a CWDM GBIC Use the following procedure to remove a CWDM GBIC. When storing a CWDM GBIC, place a dust cover over the fiber optic bores . To remove a CWDM GBIC from the switching module: 1 Disconnect the fiber cable from the CWDM GB...

Page 11 - CWDM GBIC specifications; Table 2 CWDM GBIC specifications; Item

11 CWDM GBIC specifications Table 2 CWDM GBIC specifications Item Specification Physical dimensions 0.39 X 1.18 X 2.56 inches(1 X 3 X 6.5 cm) Connectors single mode fiber optic SC Cabling SMF, 9 µm Data rate Nominal range 1.0625 to 1250 Mbaud Average launch power minimummaximum 0 dBm +4 dBm Transmit...

Page 12 - documentation

12 Connecting to Nortel Networks online This section describes products, services, and support systems that can be accessed online. Hard-copy technical manuals You can print selected technical manuals and release notes free, directly from the Internet. Go to the www.nortelnetworks.com/ documentation...

Page 13 - How to get help; Technical Solutions Center

13 Acrobat Reader* to open the manuals and release notes, search for the sections you need, and print them on most standard printers. Go to Adobe Systems at the www.adobe.com URL to download a free copy of the Adobe Acrobat Reader. You can purchase selected documentation sets, CDs, and technical pub...