Nortel NN40010-302 - Manuals

Page 3 - Contents

Contents 3 BST Doorphone Installation and Configuration Guide Contents About the Business Series Terminal (BST) Doorphone . . . . . . . . . . . . . . . . 5 What you need to know . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environment requiremen...

Page 5 - This chapter contains:; What you need to know; To install and configure a BST Doorphone you must:; Environment requirements; Check the following environment requirements:

5 BST Doorphone Installation and Configuration Guide Chapter 1About the Business Series Terminal (BST) Doorphone This guide leads a Nortel installer and/or system administrator through installing and configuring a BST Doorphone on a Business Communications Manager (BCM) system. The BST Doorphone is ...

Page 6 - How to get help; Getting Help from the Nortel Web site; download software, documentation, and product bulletins; Getting Help over the phone from a Nortel Solutions Center

6 Chapter 1 About the Business Series Terminal (BST) Doorphone NN40010-302 How to get help This section explains how to get help for Nortel products and services. Getting Help from the Nortel Web site The best way to get technical support for Nortel products is from the Nortel Technical Support Web ...

Page 7 - Creating a BST Doorphone DN record; Table 1

7 BST Doorphone Installation and Configuration Guide Chapter 2DN configuration requirements for the BST Doorphone You can set up the DN record prior to a hardware installation, or you can install the hardware before you configure the DN record. If you install the hardware first, Element Manager will...

Page 8 - Capabilities and Preferences; Table 3; Table 3

8 Chapter 2 DN configuration requirements for the BST Doorphone NN40010-302 Use Table 2 to set line access parameters for the BST Doorphone. 4 Select the Capabilities and Preferences tab and select the DN. Additional tabs display in the details panel. You must set parameters in the main panel and un...

Page 9 - Other BST Doorphone configuration requirements; The Element Manager displays all active lines under:; Scheduled Services; Configuration > Telephony

Chapter 2 DN configuration requirements for the BST Doorphone 9 BST Doorphone Installation and Configuration Guide Other BST Doorphone configuration requirements You must configure the Trunk/line data and Scheduled Services for the BST Doorphone to work properly. Trunk/line data Ensure that the BST ...

Page 11 - Wire and mount a BST Doorphone; Remove the BST Doorphone’s faceplate.; Figure 1

11 BST Doorphone Installation and Configuration Guide Chapter 3BST Doorphone Installation The BST Doorphone can be mounted in a standard recessed double-gang electrical box for flush mounting or surface mounted using the optional surface mount bracket. Mount the BST Doorphone at shoulder height (app...

Page 12 - Figure 2; KSU; Note

12 Chapter 3 BST Doorphone Installation NN40010-302 For a flush mount: (into an electrical box embedded in the wall) • Discard the surface mount gasket and bracket. • Slide the flush mount gasket onto the main housing assembly. 3 Run a standard 3-pair cable from the BCM system to the BST Doorphone l...

Page 13 - Initialize a new BST Doorphone; • In Element Manager, click on the IP address in the; Network Elements; pane. Go to the top; Optional Equipment; The Call button’s backlight automatically turns on when the

Chapter 3 BST Doorphone Installation 13 BST Doorphone Installation and Configuration Guide Initialize a new BST Doorphone The system automatically recognizes the BST Doorphone once it is installed and connected. Use the following commands, to refresh the Element Manager view in order for the BST Doo...

Page 15 - Chapter 4; Configuring BST Doorphone settings; Table 4

Chapter 4 Configuring BST Doorphone settings 15 BST Doorphone Installation and Configuration Guide Chapter 4 Configuring BST Doorphone settings Doorphone programming allows you to customize feature settings for individual BST Doorphones on the BCM system. Follow these steps to configure Doorphone se...

Page 16 - Testing the BST Doorphone; • If installed, test the DOC as shown below:

16 Chapter 4 Configuring BST Doorphone settings NN40010-302 Testing the BST Doorphone You can perform the following tasks to test the Doorphone settings: • Press the Call button on the BST Doorphone and ensure the Target DN telephone rings. • Let the Target DN telephone ring until the call is automa...

Page 17 - OPEN; Doorphone configuration tips; refer to your BCM

Chapter 4 Configuring BST Doorphone settings 17 BST Doorphone Installation and Configuration Guide — To open the door, dial the single digit code (specified in Doorphone programming) or on a two-line display telephone, press the OPEN display button. — Press the release button or hang up to end the t...