Nortel CallPilot 100 - Manuals

2 Regulatory information for CallPilot 100/150 N0008008 02 Regulatory information for CallPilot 100/150 Copyright © 2004 Nortel Networks All rights reserved. 2004. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendation...

Page 3 - Table 1

About CallPilot 100/150 3 CallPilot 100/150 Quick Start Guide About CallPilot 100/150 CallPilot 100/150 is a voice messaging product suited for small to medium sized businesses. It combines the voicemail and call processing features of a large business system into a compact, easy to use system. For ...

Page 5 - Mounting the CallPilot 100/150 on the wall; Secure the CallPilot 100/150 using a screw in the lower screw hole.; CallPilot 150 Feature Codes are; CallPilot 100/150 Installation and Maintenance Guide; Table 2; On the CallPilot 100, only TCM 1 and TCM 2 are available for use.

Installing the CallPilot 100/150 5 CallPilot 100/150 Quick Start Guide Mounting the CallPilot 100/150 on the wall 1 Attach the wall mount bracket to a secure surface by the two inner holes. Use anchors, as necessary. 2 Slip the slot on the back (near the top) of the CallPilot 100/150 onto the bracke...

Page 6 - Initializing CallPilot 100/150 using CallPilot Manager; Computer requirements for CallPilot Manager

6 Initializing the CallPilot 100/150 N0008008 02 5 Connect the power cable to the CallPilot 100/150 and the wall socket. 6 Run all the cables through the cable trough at the top of the CallPilot 100/150. 7 Close the lid. Initializing the CallPilot 100/150 Initializing the CallPilot 100/150 sets the ...

Page 7 - If you can use the default IP address; “Running the Quick Install Wizard” on page 9; If you cannot use the default IP address; serial cable; Configuring the terminal; data bits

Initializing the CallPilot 100/150 7 CallPilot 100/150 Quick Start Guide Connecting to the CallPilot 100/150 To connect to the CallPilot 100/150, you need the IP address of the CallPilot 100/150 and a connection to the network that the CallPilot 100/150 is on. The default IP address for CallPilot 10...

Page 8 - Changing the IP address using the terminal; To change any of this, press any key within 5 seconds

8 Initializing the CallPilot 100/150 N0008008 02 For information about how to set these parameters, refer to the documentation for your terminal or terminal emulation program. Changing the IP address using the terminal 1 Attach the serial cable to the serial port on the CallPilot 100/150. 2 Attach t...

Page 9 - Changing the IP address using an Ethernet crossover cable; Connecting the Ethernet crossover cable; Shut down the computer.; Running the Quick Install Wizard; Use the following procedure to run the Quick Install Wizard:

Initializing the CallPilot 100/150 9 CallPilot 100/150 Quick Start Guide 16 Connect the LAN cable to the Ethernet port on the CallPilot 100/150. You can now initialize the CallPilot parameters. For information about how to initialize the CallPilot, refer to “Running the Quick Install Wizard” on page...

Page 10 - Table 3

10 Initializing the CallPilot 100/150 N0008008 02 2 In the URL address box, type the CallPilot 100/150 IP address.For example: HTTP://192.168.110.10 The Quick Install Wizard screen appears. Depending on your system, this can take several minutes. 3 Configure the Quick Install parameters for a CallPi...

Page 12 - Click the; Install; CallPilot Manager Set Up and Operation Guide; Initializing CallPilot 100/150 using a telephone; To initialize CallPilot 100/150 you need to:

12 Initializing CallPilot 100/150 using a telephone N0008008 02 4 Click the Install button. You can now start programming the CallPilot parameters. For information about how to program CallPilot, refer to the CallPilot Manager Set Up and Operation Guide . Initializing CallPilot 100/150 using a telep...

Page 13 - Determining CallPilot 100/150 Feature Codes; NEXT; Table 4; Feature Code name

Initializing CallPilot 100/150 using a telephone 13 CallPilot 100/150 Quick Start Guide Determining CallPilot 100/150 Feature Codes Default Feature Codes are assigned to CallPilot 100/150 by the Norstar system. These default codes are listed in Table 4. When these default Feature Codes are used by o...

Page 14 - Configuring the CallPilot 100/150 initial parameters; To configure the CallPilot 100/150 initial parameters:

14 Initializing CallPilot 100/150 using a telephone N0008008 02 Configuring the CallPilot 100/150 initial parameters To configure the CallPilot 100/150 initial parameters: 1. Press ≤·°‹ . This is the default System Administration feature code. If your system does not use the default feature codes, e...

Page 15 - Additional information; Maintenance Guide

Configuring the CallPilot 100/150 15 CallPilot 100/150 Quick Start Guide Configuring the CallPilot 100/150 After you have initialized the CallPilot 100/150, you can begin configuring the CallPilot features. For information about how to configure the CallPilot 100/150, refer to the CallPilot Manager ...