Nortel BSG12aw/ew/tw - Manuals

Page 3 - Quick Start Guide; Quick Start Wizard

3 Quick Start Guide Quick Start Wizard Use this guide to complete the basic configuration of the Business Services Gateway (BSG) and to enable remote access configuration. You will need the following information from your ISP or network administrator to complete the Wizard: Login information Value I...

Page 4 - Do not change

4 NN47928-105 Gateway IP AddressPrimary DNSSecondary DNS LAN LAN IP address Do not change LAN subnet mask Do not change DHCP Setup Server Relay None DHCP Server configuration IP Pool Starting Address IP Pool End Address Wireless Country Code Wifi Security selection Open System WPA-PSK WPA2-PSK WEP s...

Page 5 - Ensure that the BSG is powered up and connected to the Internet.; Remote Access; Telnet

5 Quick Start Guide Remote Access Procedure 1 Ensure that the BSG is powered up and connected to the Internet. 2 Connect a PC to the LAN port of the BSG. 3 Open a web browser. 4 In the address bar of the browser, enter the LAN IP address of BSG and press Enter. Remote Access Enable remote access Tel...

Page 6 - The BSG login page appears.

6 NN47928-105 5 The BSG login page appears. 6 Enter the user name and password and click the login button to access the device. The system information panel appears.

Page 7 - configuration panel appears. The fields on your panel will be

7 Quick Start Guide 7 In the navigation panel on the left, click on the Quick Start Wizard option.The Quick Start Wizard opens. 8 Click on the arrow in the middle of the page to continue.The Setting Up Your WAN configuration panel appears. The fields on your panel will be different depending on whic...

Page 8 - BSGtw; Select the interface from the drop down list.; Setting Up Your LAN; configuration panel appears.

8 NN47928-105 BSGtw a Select the interface from the drop down list. b Select the Framing. c Select the Clock Source. d Enter the Time Slot. e Select whether Authentication is Required. f If authentication is required enter the username and password. g Once you have finished entering the information ...

Page 9 - BSGew; PPPoE

9 Quick Start Guide BSGew a Select the interface from the drop down list. b Select the Encapsulation mode. c Once you have finished entering the information click on the Apply button at the bottom of the panel. d Click Next.The Setting Up Your LAN configuration panel appears. PPPoE Ethernet 1. Enter...

Page 10 - BSGaw; Select the DSL Connection Type.

10 NN47928-105 BSGaw a Select the DSL Name. b Select the DSL Connection Type. c Enter the VPI/VCI. d Select whether Authentication is Required. e Enter the username. f Enter the password. g Once you have finished entering the information click on the Apply button at the bottom of the panel. h Click ...

Page 11 - Setting up your Wireless

11 Quick Start Guide 11 Click the Next button at the bottom of the panel to advance to the next panel.The Setting up your Wireless configuration panel appears. 12 Select the Country Code. 13 Refer to the information at the beginning of this guide for the correct security settings to enter. 14 Click ...

Page 12 - You have successfully completed the BSG Quick Start Wizard.

12 NN47928-105 21 You have successfully completed the BSG Quick Start Wizard. 22 Verify all of the information that you have entered is correct. If the information is correct, click Continue to save the information. If you want to make changes to the information, click on the Change button at the bo...