Nortel BCM 4.0 - Manuals - manualsarea.com

Page 3 - SOFTWARE LICENSE

3 BCM 4.0 Installation Checklist and Quick Start Guide Subject to the terms hereinafter set forth, NORTEL NETWORKS grantsto CUSTOMER and/or its representatives, with a "need to know," apersonal, non-exclusive license (1) to use the licensed software,proprietary to NORTEL NETWORKS or its supp...

Page 5 - Contents

Contents 5 BCM 4.0 Installation Checklist and Quick Start Guide Contents Chapter 1Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 7 - Chapter 1; Getting started; About this guide; The; Purpose

7 BCM 4.0 Installation Checklist and Quick Start Guide Chapter 1 Getting started About this guide The BCM 4.0 Installation Checklist and Quick Start Guide describes how to install and configure BCM200 and BCM400 systems running Business Communications Manager (BCM) 4.0 software. Although not specifi...

Page 8 - Installation and configuration summary

8 Chapter 1 Getting started N0060602 N0060602 The clock icon indicates that a procedure or task has been timed; the time is provided next to the icon. Installation and configuration summary Table 1 provides the tasks to install and configure a BCM system. Table 1 Installation and configuration check...

Page 9 - Default values; Use

Chapter 1 Getting started 9 BCM 4.0 Installation Checklist and Quick Start Guide Default values Use Table 2 and Table 3 to view and record changes to default BCM system information. 15 min. Configure the required BCM system parameters (Element Manager or Startup Profile) “Configuring the BCM system ...

Page 11 - Checklists; Installation and Maintenance Guide; General checklist

Chapter 1 Getting started 11 BCM 4.0 Installation Checklist and Quick Start Guide Checklists Before installing the BCM hardware, complete the following checklists (see the BCM200/400 4.0 Installation and Maintenance Guide for more information). General checklist F Determine the location for the main...

Page 12 - Expansion unit and media bay modules components checklist; one expansion unit

12 Chapter 1 Getting started N0060602 N0060602 Expansion unit and media bay modules components checklist Check that you have the following components, and inspect the components for any damage: F one expansion unit F one power supply cable F one expansion cable (use only supplied Ethernet cable) F f...

Page 13 - Chapter 2; System overview; Refer to the chapter “Introducing the BCM hardware” in the; Main units

13 BCM 4.0 Installation Checklist and Quick Start Guide Chapter 2 System overview The BCM system includes the following primary hardware components and configuration tools: • “Main units” on page 13 • “BCM expansion unit (BCM400 only)” on page 14 • “Element Manager” on page 15 • “Startup Profile” on...

Page 17 - Chapter 3; Physical installation; This chapter provides the following installation procedures:; Mounting a BCM main unit and expansion unit; 00 4.0 Installation and Maintenance Guide; Installing a BCM unit in a rack; Use the following procedures to install a BCM unit in a rack:

17 BCM 4.0 Installation Checklist and Quick Start Guide Chapter 3 Physical installation This chapter provides the following installation procedures: • “Mounting a BCM main unit and expansion unit” on page 17 • “Connecting the expansion unit to the main unit” on page 21 • “Installing the MBMs” on pag...

Page 18 - To attach the rack-mount brackets; Place the BCM unit on a flat, clean surface.; To mount a BCM unit in an equipment rack; Fasten the rack-mount brackets to the rack using four screws (see

18 Chapter 3 Physical installation N0060602 N0060602 To attach the rack-mount brackets 1 Place the BCM unit on a flat, clean surface. 2 Align the screw holes between the BCM unit and one of the rack-mount brackets. 3 Fasten the bracket to the BCM unit using four screws. Refer to Figure 4 . 4 Repeat ...

Page 19 - Installing a BCM unit on a wall; Mount the plywood backboard securely to the wall.

Chapter 3 Physical installation 19 BCM 4.0 Installation Checklist and Quick Start Guide Figure 5 Fasten the BCM400 main unit to an equipment rack 5 If the BCM system has an expansion unit, mount the expansion unit in the same way as the main unit. Installing a BCM unit on a wall To wall-mount a BCM ...

Page 20 - Tighten the wood screws against the wall-mount bracket.; Installing a BCM unit on a flat surface; Use only the screws supplied with the wall-mount bracket kit

20 Chapter 3 Physical installation N0060602 N0060602 5 Align the screw holes on one side of the BCM unit with the wall-mount bracket. 6 Fasten the wall-mount brackets securely to the BCM unit using the screws provided. Refer to Figure 6 . Figure 6 Attach the wall-mount bracket to the BCM400 main uni...

Page 21 - To install a BCM unit on flat surface; Connecting the expansion unit to the main unit; Maintenance Guide; To connect the expansion unit to the main unit; Installing the MBMs; and Maintenance Guide

Chapter 3 Physical installation 21 BCM 4.0 Installation Checklist and Quick Start Guide To install a BCM unit on flat surface 1 Attach four rubber feet to the corners on the bottom of the BCM unit. 2 Position the unit on the table or shelf. Make sure you leave enough space around the unit for ventil...

Page 24 - To install MBMs; Connecting the MBM wiring; Use only qualified persons to service the system.

24 Chapter 3 Physical installation N0060602 N0060602 To install MBMs 1 Ensure that the switches on the MBM are set correctly (see Table 6 and Table 7 ). In the case of FEM MBMs, the switches activate the front ports. Ensure that the switches accurately reflect the ports you require. 2 Select an open...

Page 25 - Figure 8; Electrical shock hazards; The ports on these MBMs are meant to be connected only to approved

Chapter 3 Physical installation 25 BCM 4.0 Installation Checklist and Quick Start Guide To connect the DTM, CTM, BRIM, or 4x16 MBMs 1 On the front of the MBM, locate the RJ-48C jack (DTM), RJ-45 jack (BRIM), or the RJ-11 jacks (CTM and 4x16). 2 Connect one end of the cable to the demarcation blocks ...

Page 26 - disable the BCM system internal CSU.

26 Chapter 3 Physical installation N0060602 N0060602 Figure 8 DTM RJ-48C wiring array Figure 9 CTM RJ-11 wiring array Figure 10 BRIM S/T RJ-45 wiring array Warning: If you are using a service provider channel service unit (CSU), you must disable the BCM system internal CSU. 1 2 3 4 5 6 7 8 DTM conne...

Page 27 - Insert the connector into the jack on the MBM.; To connect the GATM

Chapter 3 Physical installation 27 BCM 4.0 Installation Checklist and Quick Start Guide All MBMs have an auxiliary jack (the CTM8 has two). Do not attempt to plug digital equipment into this jack. 3 Insert the connector into the jack on the MBM. To connect the GATM 1 Connect one end of the cable to ...

Page 28 - Attach the cables for the telephones to the connecting blocks.

28 Chapter 3 Physical installation N0060602 N0060602 2 Install the telephones and peripheral equipment (if it is a new system): a Attach the cables for the telephones to the connecting blocks. b Install the telephones. 3 Plug the female amphenol connector into the interface on the front of the MBM. ...

Page 29 - Wiring the FEM; Ensure the BCM system is powered up and functional.; Powering up the BCM system; Refer to the chapter “Connecting the cables” in the; Handling optical fiber cables.; The BCM system is available in North American and International

Chapter 3 Physical installation 29 BCM 4.0 Installation Checklist and Quick Start Guide Wiring the FEM A fiber expansion module (FEM) allows you to upgrade from a Norstar system to a BCM system by reusing the Norstar MBMs. The MBMs connect to the FEM using the same fiber cable that connected them to...

Page 30 - To power up the BCM system; Connecting the data networking hardware; Guide; To connect the BCM system to the WAN; “Connecting to

30 Chapter 3 Physical installation N0060602 N0060602 To power up the BCM system 1 Connect the BCM main unit power cord to an electrical outlet that is a non-switchable, third-wire ground AC outlet. If you use a power bar, plug the power cords into the power bar and connect the power bar to the AC ou...

Page 31 - To connect the modem; Unpacking, placing, and wiring telephone hardware; To install telephones

Chapter 3 Physical installation 31 BCM 4.0 Installation Checklist and Quick Start Guide • To connect the WAN card using the RJ-48C connector, insert the wide area network (WAN) cable into the RJ-48C jack on the WAN card (see Figure 1 on page 13 and Figure 2 on page 14 ). • To connect the WAN card us...

Page 32 - To install optional telephony equipment; and

32 Chapter 3 Physical installation N0060602 N0060602 4 Label the telephone with customer-supplied information. Note the location, wall jack identifier, and phone number for punch downs and BCM software commissioning. To install optional telephony equipment This includes auxiliary ringer, external pa...

Page 33 - Chapter 4; Connection and configuration procedures; Connecting to the BCM system; Refer to the chapter “Initialize the system” in the

33 BCM 4.0 Installation Checklist and Quick Start Guide Chapter 4 Connection and configuration procedures The initial configuration defines your BCM system to the network. It also gives the system a unique identity and initial parameters. From that point, you can continue with the specific configura...

Page 34 - Connecting through the Ethernet crossover cable

34 Chapter 4 Connection and configuration procedures N0060602 N0060602 Connecting through the Ethernet crossover cable Use the following two procedures to connect the Ethernet crossover cable and configure your computer to connect to the BCM system. To connect the Ethernet crossover cable 1 Shut dow...

Page 35 - To connect through the serial port; User ID; Domain

Chapter 4 Connection and configuration procedures 35 BCM 4.0 Installation Checklist and Quick Start Guide To connect through the serial port 1 Attach the null modem cable to the serial port on the BCM main unit. 2 Attach the other end of the null modem cable to the serial port on the terminal or com...

Page 36 - Downloading from the BCM web page; To access the BCM web page; “To access the BCM web page” on page 36

36 Chapter 4 Connection and configuration procedures N0060602 N0060602 9 Enter the number of the parameter you want to configure. Downloading from the BCM web page After your computer is connected to the BCM system, either through an Ethernet crossover cable or through a LAN connection, you can down...

Page 37 - To download the Startup Profile template; Welcome to BCM; Generating a software keycode; Keycode Installation Guide; Configuring the BCM system parameters

Chapter 4 Connection and configuration procedures 37 BCM 4.0 Installation Checklist and Quick Start Guide To download the Startup Profile template 1 Access the BCM web page (see “To access the BCM web page” on page 36 ). 2 On the Welcome to BCM web page, click Administrator Applications . The Admini...

Page 39 - To configure the BCM system using BCM Element Manager; Open BCM Element Manager.; Network; and then select; Business

Chapter 4 Connection and configuration procedures 39 BCM 4.0 Installation Checklist and Quick Start Guide You can configure the BCM system by using either Element Manager or the Startup Profile. To configure the BCM system using BCM Element Manager 1 Open BCM Element Manager. 2 From the Network menu...

Page 40 - To configure the BCM system using the Startup Profile (optional); “To download the Startup Profile

40 Chapter 4 Connection and configuration procedures N0060602 N0060602 Password: PlsChgMe! 4 Click OK . 5 From the Network Elements folder, select the BCM system IP address. 6 Make sure that the correct username and password are entered. 7 Click Connect . You are now connected to the BCM system. 8 C...

Page 41 - Apply

Chapter 4 Connection and configuration procedures 41 BCM 4.0 Installation Checklist and Quick Start Guide 6 In the Startup Profile editor, enter the remaining information that you want loaded onto the BCM system. The Startup Profile editor contains explanations of the various parameters. Click the c...

Page 42 - Startup Profile times and LED sequence; Configuring the MBMs; To configure the MBMs; Configuration

42 Chapter 4 Connection and configuration procedures N0060602 N0060602 Startup Profile times and LED sequence Table 10 provides details about the BCM system boot times and LED sequence using the Startup Profile to configure system parameters. Configuring the MBMs You must configure the MBMs to funct...

Page 43 - Modules; Customizing other parameters

Chapter 4 Connection and configuration procedures 43 BCM 4.0 Installation Checklist and Quick Start Guide Figure 12 Telephony Resources page 4 In the Modules section, select the row of the MBM that you want to configure. 5 Double-click the Prog Type field to display the drop-down list. 6 Select the ...