Nortel 4070 - Manuals

Notices 9 National Environmental Statements of Compliance The WEEE Directive 2002/96/EC and RoHS (Restriction of HazardousSubstances) Directive 2002/95/EC sets collection, recycling and recoverytargets for various categories of electrical products and their waste. Restriction on Hazardous Substances...

10 Regulatory Information and Safety Precautions CAUTION Caution notices provide information about how to avoid possibleservice disruption or damage to Nortel products. WARNING Warning notices provide information about how to avoid personalinjury when working with Nortel products. DANGER Danger — Hi...

Trademarks 11 CAUTION To reduce the risk of fire, use only number 26 AWG or largerUL Listed or CSA Certified Telecommunication Line Cord for allnetwork connections. WARNING Before working on this equipment be aware of good safetypractices and the hazards involved with electrical circuits. Trademarks...

13 Software license This section contains the Nortel Networks software license. Nortel Networks software license agreement This Software License Agreement ("License Agreement") is betweenyou, the end-user ("Customer") and Nortel Networks Corporation andits subsidiaries and affiliates...

14 Software license as expressly authorized; b) reverse assemble, reverse compile, reverseengineer or otherwise translate the Software; c) create derivative worksor modifications unless expressly authorized; or d) sublicense, rent orlease the Software. Licensors of intellectual property to Nortel Ne...

17 New in this release The following sections detail what’s new in Nortel Secure Network AccessInstallation — Quick Start Switch 4070 (NN47230-303) for Release 2.0. • "Features" (page 17) • "Other changes" (page 17) Features This is the first standard release of the document. Other c...

19 Introduction The Nortel Secure Network Access Switch (NSNA) 4070 Quick Start Guideprovides basic instructions about installing the hardware and performingbasic configuration and management of the network. The Nortel Secure Network Access Solution (Nortel SNAS) is a clientlesssolution that provide...

21 Installation preparation This section provides basic information about the Nortel Secure NetworkAccess Switch (NSNA) 4070 and the checklist of the shipped accessories. Navigation • "Safety precautions" (page 21) • "Installation checklist" (page 23) Safety precautions This section ...

22 Installation preparation • To promote proper air circulation, ensure the device vents are notblocked or obstructed by cables, panels, server rack frames, or othermaterials. A minimum of 15 centimeters (6 inches) of space providesproper airflow. • To prevent damage to server components, always ins...

Installation checklist 23 Installation checklist This checklist represents the high-level tasks that must be performed tosuccessfully install the Nortel Secure Network Access Switch. Deviceinstallation involves the following steps: Procedure steps Step Action 1 Choose a suitable location to install ...

25 Installation This chapter contains installation instructions for the Nortel Secure NetworkAccess Switch (NSNA). Navigation • "Unpacking the device" (page 25) • "Installing an NSNA device into a rack" (page 26) • "Cabling the device" (page 30) Unpacking the device Unpack th...

26 Installation Check Accessory Use to copper networkinterface card Connect the network cables. Console cable Establish a console connectionto the device. —End— Installing an NSNA device into a rack Install an NSNA in a standard equipment rack. Prerequisites for installing an NSNA into a rack • Do n...

30 Installation —End— ATTENTION To remove the device, reverse these instructions. Cabling the device This section describes about cabling the device for network and consoleconnections. Cabling the device navigation • "Connecting network cables" (page 30) • "Connecting serial cables" ...

33 Configuration This chapter contains configuration instructions for commissioning theNortel Secure Network Access Switch. Navigation • "Creating a new cluster" (page 33) • "Joining an SNAS to an existing cluster" (page 36) • "Enabling the browser-based interface" (page 38) ...

34 Configuration 3 To initiate the system connection process, press ENTER on theterminal. 4 At the login prompt, log in as user: admin. 5 At the password prompt, enter the administrator password. Thedefault administrator password is admin. ATTENTION To ensure continuing system security, change the d...

Creating a new cluster 35 Enter network mask [255.255.255.0]: Specify the desired network mask or accept the suggested value bypressing ENTER. If a connected router or switch attaches VLAN tagIDs to incoming packets, specify the VLAN tag ID used. 10 Setup a two armed configuration. Setup a two armed...

36 Configuration Generate new SSH host keys (yes/no) [yes]: This may take a few seconds...ok Enter a password for the "admin" user: Re-enter to confirm: To maintain a high level of security while using an SSH connection,accept the default choice to generate new SSH host keys. 15 If you like ...

38 Configuration 6 Enter the Management IP address (MIP) of the existing cluster. Provide the Management IP address of the cluster to which youwant to join the new SNAS. To check the Management IP of anexisting cluster, connect to the cluster and use the /cfg/sys/cur command. 7 Provide the correct a...

40 Configuration >> Administrative Applications# https 9 (Optional) From the HTTPS access menu, designate a port forHTTPS access using the port command. >> HTTPS# port <port_number> Using a port other than 4443 requires the user to designate the portwhen accessing the BBI. For exam...

Applying the Nortel SNAS license 41 Part Number Description EB1639183 Secure Network Access License - Add 2000 concurrentendpoints EB1639184 Secure Network Access License - Add 5000 concurrentendpoints Procedure steps Step Action 1 Contact Nortel Customer Support and purchase part number. In North A...

Nortel Secure Network Access Installation — Quick Start Switch 4070 Copyright © 2008, Nortel NetworksAll Rights Reserved. Publication: NN47230-303 Document status: Standard Document version: 01.01 Document date: 28 July 2008 To provide feedback or report a problem in this document, go to http://www....