Nortel 2750 - Manuals - manualsarea.com

Page 2 - Statement of conditions

2 NN46110-318 02.01 Copyright © 2007 Nortel Networks. All Rights Reserved. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without ex...

Page 3 - Nortel VPN Router Installation — VPN Router 2750; EC Declaration of Conformity; Japan/Nippon requirements only; Denan statement; Taiwan requirements; Bureau of Standards, Metrology and Inspection (BSMI) statement

3 Nortel VPN Router Installation — VPN Router 2750 Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures. Achtung: Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnberei...

Page 4 - Licensed Use of Software.

4 NN46110-318 02.01 Canada requirements only Canadian Department of Communications Radio Interference Regulations This digital apparatus (VPN Router 2750) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canad...

Page 5 - General

5 Nortel VPN Router Installation — VPN Router 2750 3. Limitation of Remedies. IN NO EVENT SHALL NORTEL NETWORKS OR ITS AGENTS OR SUPPLIERS BE LIABLE FOR ANY OF THE FOLLOWING: a) DAMAGES BASED ON ANY THIRD PARTY CLAIM; b) LOSS OF, OR DAMAGE TO, CUSTOMER’S RECORDS, FILES OR DATA; OR c) DIRECT, INDIREC...

Page 7 - Contents

7 Nortel VPN Router Installation — VPN Router 2750 Contents New in this release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 11 - Figures

11 Nortel VPN Router Installation — VPN Router 2750 Figures Figure 1 Front view of the Nortel VPN Router 2750 . . . . . . . . . . . . . . . . . . . . . . . . 26 Figure 2 Placement of rubber feet on the bottom of the chassis . . . . . . . . . . . . . . 29 Figure 3 Attaching the cage nuts to the rack ...

Page 13 - Tables

13 Nortel VPN Router Installation — VPN Router 2750 Tables Table 1 Items shipped with the Nortel VPN Router 2750 . . . . . . . . . . . . . . . . . . . 27 Table 2 Interfaces and cables for the Nortel VPN Router 2750 . . . . . . . . . . . . . . . 36 Table 3 Power cord requirements . . . . . . . . . . ...

Page 15 - New in this release; The following section details what’s new in; Features; and

15 Nortel VPN Router Installation — VPN Router 2750 New in this release The following section details what’s new in Nortel VPN Router Installation— VPN Router 2750 (NN46110-318) for Release 7.05.300. Features See the following sections for information about feature-related changes. 1000BASE-T (1000 ...

Page 17 - How to get help; Finding the latest updates on the Nortel Web site; Getting help from the Nortel Web site

17 Nortel VPN Router Installation — VPN Router 2750 How to get help This chapter explains how to get help for Nortel products and services. Finding the latest updates on the Nortel Web site The content of this documentation was current at the time the product was released. To check for updates to th...

Page 18 - download software, documentation, and product bulletins

18 How to get help NN46110-318 02.01 This site provides quick access to software, documentation, bulletins, and tools to address issues with Nortel products. From this site you can: • download software, documentation, and product bulletins • search the Technical Support site and the Nortel Knowledge...

Page 19 - Getting help through a Nortel distributor or reseller

How to get help 19 Nortel VPN Router Installation — VPN Router 2750 Getting help through a Nortel distributor or reseller If you purchased a service contract for your Nortel product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller.

Page 21 - Preface; the; Before you begin; VPN Router Security Accelerator card

21 Nortel VPN Router Installation — VPN Router 2750 Preface The Nortel VPN Router 2750 is part of the Nortel VPN router product family. The VPN Nortel Routers support secure, reliable IP VPNs in a single, integrated hardware device. Throughout this guide, the VPN Router is also referred to as the ga...

Page 22 - Text conventions; bold Courier text; italic text

22 Preface NN46110-318 02.01 Text conventions This guide uses the following text conventions: Acronyms This guide uses the following acronyms: bold Courier text Indicates command names and options and text that you need to enter.Example: Use the show health command. Example: Enter terminal paging { ...

Page 23 - Related publications; Nortel VPN Router Configuration — Basic Features

Preface 23 Nortel VPN Router Installation — VPN Router 2750 Related publications For complete information about configuring, monitoring, and managing the VPN Router 2750, refer to the following publications (included on the software CD): • Release notes provide the latest information, including brie...

Page 24 - Nortel VPN Router Configuration — Routing; Printed technical manuals; , find the product for which you

24 Preface NN46110-318 02.01 • Nortel VPN Router Configuration — Routing (NN46110-504) provides instructions for configuring RIP, OSPF, and VRRP, as well as instructions for configuring ECMP, routing policy services, and client address redistribution. • Nortel VPN Router Configuration — SSL VPN Serv...

Page 25 - This chapter describes how to install the VPN Router 2750 chassis.; The VPN Router 2750 is available in two models:; Topic

25 Nortel VPN Router Installation — VPN Router 2750 Chapter 1Installing the Nortel VPN Router 2750 chassis This chapter describes how to install the VPN Router 2750 chassis. This chapter contains the following topics: Description of the Nortel VPN Router 2750 With the VPN Router 2750, you can supply...

Page 26 - Chapter 1 Installing the Nortel VPN Router 2750 chassis; Figure 1; Front view of the Nortel VPN Router 2750; Preparing to install the Nortel VPN Router 2750

26 Chapter 1 Installing the Nortel VPN Router 2750 chassis NN46110-318 02.01 Figure 1 shows the front view of the Nortel VPN Router 2750. Figure 1 Front view of the Nortel VPN Router 2750 The VPN Router 2750 chassis provides the following: • two 10/100 Ethernet local area network (LAN) ports on the ...

Page 27 - Shipment contents; “How to get help” on page 17; Table 1; Items shipped with the Nortel VPN Router 2750

Chapter 1 Installing the Nortel VPN Router 2750 chassis 27 Nortel VPN Router Installation — VPN Router 2750 Shipment contents In addition to the gateway and this guide, the shipping container for the VPN Router 2750 contains a number of hardware accessories and other items (Table 1) . Inspect all it...

Page 28 - Additional equipment; Cables; “Connecting communications cables” on page 36; Hardware for mounting the chassis in an equipment rack; heavy-duty steel construction; Site requirements; Appendix A, “Technical specifications,” on page 77

28 Chapter 1 Installing the Nortel VPN Router 2750 chassis NN46110-318 02.01 Additional equipment You need items that are not included in the VPN Router 2750 shipping container. Before you begin the installation, ensure that you have all the cables, tools, and other equipment that you need. Cables Y...

Page 29 - Installing the chassis; To install the VPN Router 2750, do one of the following:; Installing the chassis on a flat surface; Figure 2; Placement of rubber feet on the bottom of the chassis

Chapter 1 Installing the Nortel VPN Router 2750 chassis 29 Nortel VPN Router Installation — VPN Router 2750 Installing the chassis To install the VPN Router 2750, do one of the following: • Position the chassis on a flat, sturdy, horizontal surface. • Mount the chassis in a standard equipment rack (...

Page 30 - Installing the chassis in an equipment rack; a standard 19-inch equipment rack; Rack-mount recommendations; Nortel recommends a maximum ambient temperature of 40; Attaching the shelf in the equipment rack; To attach the shelf to the inside of the equipment rack:

30 Chapter 1 Installing the Nortel VPN Router 2750 chassis NN46110-318 02.01 Installing the chassis in an equipment rack To mount the VPN Router 2750 in an equipment rack, you need the following equipment: • a standard 19-inch equipment rack • four screws (supplied with the chassis) • four cage nuts...

Page 31 - Figure 3; Attaching the cage nuts to the rack; Position the rack-mount shelf inside the rack as shown in; Figure 4; Installing the shelf in the equipment rack; Snap the support flange into place

Chapter 1 Installing the Nortel VPN Router 2750 chassis 31 Nortel VPN Router Installation — VPN Router 2750 Figure 3 Attaching the cage nuts to the rack 2 Position the rack-mount shelf inside the rack as shown in Figure 4 . 3 Align the holes in the shelf with holes in the front of the rack. Figure 4...

Page 32 - Mounting the chassis in the equipment rack; Nortel recommends that two people install the chassis in the rack.; Figure 5; Removing the front bezel; Risk of equipment damage; Do not use the piece with the Nortel logo and the LEDs as a handle.

32 Chapter 1 Installing the Nortel VPN Router 2750 chassis NN46110-318 02.01 Mounting the chassis in the equipment rack Nortel recommends that two people install the chassis in the rack. To install the VPN Router 2750 in the equipment rack: 1 Set the VPN Router 2750 on the rack-mount shelf. 2 Remove...

Page 33 - Figure 4 on; Figure 6; Replacing the front bezel

Chapter 1 Installing the Nortel VPN Router 2750 chassis 33 Nortel VPN Router Installation — VPN Router 2750 3 Insert one of the supplied panhead screws through the bottom hole on each side of the shelf into the hole in the rack, and tighten the screws ( Figure 4 on page 31 ). 4 Replace the front bez...

Page 35 - This chapter contains the following topics:

35 Nortel VPN Router Installation — VPN Router 2750 Chapter 2Cabling the VPN Router and turning the power on This chapter provides information about how to connect communications cables and the power cord to the VPN Router 2750. This chapter contains the following topics: Caution: Connect the cables...

Page 36 - Chapter 2 Cabling the VPN Router and turning the power on; Gather the cables to attach to the VPN Router 2750.; Table 2; Interfaces and cables for the Nortel VPN Router 2750

36 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 Connecting communications cables Gather the cables to attach to the VPN Router 2750. Table 2 lists the system ports and the ports provided on the optional interface cards that you can install in the VPN Router 2750. The t...

Page 37 - Figure 7; Rear view of the Nortel VPN Router 2750; Connect the interface cables to the VPN Router 2750 in this order:; Connecting the power cord; You must order the power cord for the VPN Router 2750 separately.

Chapter 2 Cabling the VPN Router and turning the power on 37 Nortel VPN Router Installation — VPN Router 2750 Figure 7 shows the back of the VPN Router 2750. All interface cables and the power cord attach to the rear of the gateway. Figure 7 Rear view of the Nortel VPN Router 2750 Connect the interf...

Page 38 - The power cord must meet the requirements described in; Table 3; Power cord requirements; Protect the VPN Router 2750 by plugging it into a surge suppressor.

38 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 The power cord must meet the requirements described in Table 3 . To connect the power cord and turn on the system power: 1 Connect the power cord to the AC receptacle on the back of the gateway (see Figure 7 on page 37 )....

Page 39 - Verifying a successful installation; The following sequence of LEDs should occur:

Chapter 2 Cabling the VPN Router and turning the power on 39 Nortel VPN Router Installation — VPN Router 2750 Verifying a successful installation After you connect the gateway to the power source and turn it on, you can verify a successful installation by checking the light emitting diodes (LED) on ...

Page 40 - Understanding the LEDs; . These LEDs indicate the status of the VPN Router 2750.; Figure 8; Front panel LEDs; Table 4; Front panel LED indicators

40 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 Understanding the LEDs This section describes the LEDs on the front panel of the VPN Router 2750 and on the interface cards that have LEDs. You can confirm that you properly cabled the LAN and WAN interfaces by examining ...

Page 41 - Figure 9; LEDs on the system 10/100BASE-TX Ethernet ports; Table 5; LED indicators on the system 10/100BASE-TX Ethernet ports

Chapter 2 Cabling the VPN Router and turning the power on 41 Nortel VPN Router Installation — VPN Router 2750 LEDs on the system 10/100BASE-TX Ethernet ports Each of the two 10/100BASE-TX Ethernet ports on the rear of the VPN Router 2750 has two LEDs (Figure 9) . Figure 9 LEDs on the system 10/100BA...

Page 42 - 0/100BASE-TX Ethernet interface card LEDs; shows the LEDs on the 10/100BASE-TX Ethernet interface card.; LEDs on the 10/100BASE-TX Ethernet interface card; Table 6; LED indicators on the 10/100BASE-TX Ethernet interface card

42 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 10/100BASE-TX Ethernet interface card LEDs Figure 10 shows the LEDs on the 10/100BASE-TX Ethernet interface card. Figure 10 LEDs on the 10/100BASE-TX Ethernet interface card Table 6 describes the LEDs on the 10/100BASE-TX...

Page 43 - shows the LEDs on the 1000BASE-T Ethernet interface card.; Table 7; LED indicators on the 1000 GT Ethernet interface card

Chapter 2 Cabling the VPN Router and turning the power on 43 Nortel VPN Router Installation — VPN Router 2750 1000BASE-T (1000 GT) Ethernet interface card LEDs The following figure shows the LEDs on the 10BASE-T/100BASE-TX/1000BASE-T 1000 GT Ethernet interface card. Figure 11 LEDs on the 1000 GT Eth...

Page 44 - 000BASE-SX Ethernet interface card LED; shows the LED on the 1000BASE-SX Ethernet interface card.; LED on the 1000BASE-SX Ethernet interface card; Table 8; LED indicators on the 1000BASE-T (1000 MT) Ethernet interface card

44 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 Figure 12 LEDs on the 1000BASE-T (1000 MT) Ethernet interface card Table 8 describes the LEDs on the 1000BASE-T Ethernet interface card. 1000BASE-SX Ethernet interface card LED Figure 13 shows the LED on the 1000BASE-SX E...

Page 45 - Table 9; LED indicator on the 1000BASE-SX Ethernet interface card

Chapter 2 Cabling the VPN Router and turning the power on 45 Nortel VPN Router Installation — VPN Router 2750 Table 9 describes the LED on the 1000BASE-SX Ethernet interface card. Table 9 LED indicator on the 1000BASE-SX Ethernet interface card LED Indicator Description ACT/LNK Steady green The port...

Page 46 - describes the LEDs on the 56/64K CSU/DSU WAN interface card.; LED indicators on the 56/64K CSU/DSU WAN interface card

46 Chapter 2 Cabling the VPN Router and turning the power on NN46110-318 02.01 56/64K CSU/DSU WAN interface card LEDs Figure 14 shows the LEDs on the 56/64K CSU/DSU WAN interface card. Figure 14 LEDs on the 56/64K CSU/DSU WAN interface card Table 10 describes the LEDs on the 56/64K CSU/DSU WAN inter...

Page 47 - ADSL WAN interface card LEDs; shows the LEDs on the asymmetric digital subscriber line (ADSL); LEDs on the ADSL WAN interface card; describes the LEDs on the ADSL WAN interface card.; LED indicators on the ADSL WAN interface card

Chapter 2 Cabling the VPN Router and turning the power on 47 Nortel VPN Router Installation — VPN Router 2750 ADSL WAN interface card LEDs Figure 15 shows the LEDs on the asymmetric digital subscriber line (ADSL) WAN interface card. Figure 15 LEDs on the ADSL WAN interface card Table 11 describes th...

Page 49 - Quad T1/E1 CSU/DSU WAN interface card LEDs; LEDs on the quad T1/E1 CSU/DSU WAN interface card; describes the LEDs on the quad T1/E1 CSU/DSU WAN interface card.; LED indicators on the quad T1/E1 CSU/DSU WAN interface card

Chapter 2 Cabling the VPN Router and turning the power on 49 Nortel VPN Router Installation — VPN Router 2750 Quad T1/E1 CSU/DSU WAN interface card LEDs Figure 17 shows the LEDs on the quad T1/E1 channel service unit/digital service unit (CSU/DSU) WAN interface card. Figure 17 LEDs on the quad T1/E1...

Page 51 - shows the LEDs on the Secure Sockets Layer (SSL) VPN Module 1000.; LEDs on the SSL VPN Module 1000; describes the LEDs on the SSL VPN Module 1000.; LED indicators on the SSL VPN Module 1000

Chapter 2 Cabling the VPN Router and turning the power on 51 Nortel VPN Router Installation — VPN Router 2750 SSL VPN Module 1000 LEDs Figure 19 shows the LEDs on the Secure Sockets Layer (SSL) VPN Module 1000. Figure 19 LEDs on the SSL VPN Module 1000 Table 15 describes the LEDs on the SSL VPN Modu...

Page 54 - Chapter 3 Configuring the management IP interface; IP address for the management interface

54 Chapter 3 Configuring the management IP interface NN46110-318 02.01 Required information Before you configure the management interface, collect this information: • IP address for the management interface The management IP address must be accessible from one of the private physical interfaces on t...

Page 55 - Configuring the management IP address; Enter; Welcome to the VPN Router; Please enter the administrator's user name:; admin; Please enter the administrator's password:

Chapter 3 Configuring the management IP interface 55 Nortel VPN Router Installation — VPN Router 2750 Configuring the management IP address You use the serial interface to assign the VPN Router 2750 a management IP address and subnet mask so that you can then use a Web browser for management. To con...

Page 56 - The serial main menu appears.; The interface menu appears.

56 Chapter 3 Configuring the management IP interface NN46110-318 02.01 The serial main menu appears. Main Menu: System is currently in NORMAL mode. 0) Management Address 1) Interfaces 2) Administrator 3) Default Private Route Menu 4) Default Public Route Menu 5) Create A User Control Tunnel (IPsec) ...

Page 57 - Please select a menu choice:

Chapter 3 Configuring the management IP interface 57 Nortel VPN Router Installation — VPN Router 2750 6 Type 0, and press Enter to configure the IP address. The IP address prompt appears. 0) Slot 0, Port 2, Public LAN IP Address = Subnet Mask = 0.0.0.0 Speed/Duplex = AutoNegotiate *Type 0.0.0.0 to d...

Page 58 - “Testing the configuration” on page 59

58 Chapter 3 Configuring the management IP interface NN46110-318 02.01 Type R , and press Enter to return to the serial main menu. 10 To configure the management IP address, type 0, and press Enter . The Management IP Address menu appears. - Management IP Address Menu M) Management IP Address = R) R...

Page 59 - Testing the configuration

Chapter 3 Configuring the management IP interface 59 Nortel VPN Router Installation — VPN Router 2750 Testing the configuration After you assign a management IP address to the VPN Router 2750, start your Web browser to verify that you can access the gateway from the browser. To manage the VPN Router...

Page 60 - Troubleshooting; Ensure that your PC is running a supported browser (see

60 Chapter 3 Configuring the management IP interface NN46110-318 02.01 Troubleshooting If you cannot connect to the VPN Router 2750 using your browser, check the following items: • Ensure that you entered the correct IP address in the browser window. • Type a known URL in the browser window to ensur...

Page 61 - Secure Sockets Layer (SSL) VPN Module 1000

61 Nortel VPN Router Installation — VPN Router 2750 Chapter 4Installing option cards and DIMMs This chapter provides instructions about how to install and replace the following field replaceable units (FRU) in the VPN Router 2750: • LAN, WAN, and serial interface cards • Secure Sockets Layer (SSL) V...

Page 62 - Chapter 4 Installing option cards and DIMMs; reload; Nortel VPN Router; Risk of electric shock

62 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 Shutting down the system to add or replace hardware To install or replace an option card or a DIMM, you must first shut down the VPN Router 2750 and unplug it. To shut down the VPN Router 2750: 1 Use the Web graphical user interface (G...

Page 63 - Removing the front bezel and top cover; To remove the front bezel:

Chapter 4 Installing option cards and DIMMs 63 Nortel VPN Router Installation — VPN Router 2750 Removing the front bezel and top cover To install option cards or DIMMs, you must remove the front bezel and the top cover from the gateway. To remove the front bezel: 1 Shut down the VPN Router 2750 usin...

Page 64 - To remove the top cover:

64 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 3 Grip the two handles, and firmly pull the bezel toward you to unsnap it from the chassis. The first several times that you remove the front bezel, the bezel can stick because the ball studs and socket clips are new. To remove the top...

Page 65 - Slide the top cover forward approximately 1/4 inch.

Chapter 4 Installing option cards and DIMMs 65 Nortel VPN Router Installation — VPN Router 2750 Figure 21 Removing the top cover 3 Slide the top cover forward approximately 1/4 inch. 4 Lift the lid 2 or 3 inches, and pull it off the chassis. The VPN Router 2750 system board is now exposed. Figure 22...

Page 66 - Risk of injury

66 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 Figure 22 Location of option card and DIMM slots on the system board Warning: Risk of injury Beware of danger if you incorrectly replace the battery. Replace the battery with the same type or an equivalent battery only, as recommended ...

Page 67 - Attaching the antistatic wrist strap; To attach the antistatic wrist strap:; Location of the grounding jack for the antistatic wrist strap

Chapter 4 Installing option cards and DIMMs 67 Nortel VPN Router Installation — VPN Router 2750 Attaching the antistatic wrist strap Nortel ships the VPN Router 2750 with an antistatic wrist strap. The antistatic wrist strap directs the discharge of static electricity from your body to the chassis o...

Page 68 - Installing and replacing option cards; The VPN Router 2750 has four slots for option cards (; Supported option cards for the Nortel VPN Router 2750 2750

68 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 Installing and replacing option cards The VPN Router 2750 has four slots for option cards ( Figure 22 on page 66 ). This section provides instructions about adding new option cards to the gateway or, if necessary, replacing an existing...

Page 69 - VPN Module 1000 is installed in slot 1.; Installing and replacing an option card; Installing other option cards with the SSL VPN Module 1000

Chapter 4 Installing option cards and DIMMs 69 Nortel VPN Router Installation — VPN Router 2750 Table 17 provides additional guidelines for option card installation when an SSL VPN Module 1000 is installed in slot 1. Installing and replacing an option card To install or replace an interface card or ...

Page 70 - Remove the top cover from the chassis (see; Do not try to install an HSSI WAN interface card or a VPN

70 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 1 Shut down the VPN Router 2750 using the Web GUI or the command line interface and then unplug it as described in “Shutting down the system to add or replace hardware” on page 62 . 2 Remove the front bezel from the chassis, and then r...

Page 71 - Replace the screw that secures the card to the slot (

Chapter 4 Installing option cards and DIMMs 71 Nortel VPN Router Installation — VPN Router 2750 Figure 24 Installing and removing an option card 8 Lower the new option card into the slot, and gently press the connector into the slot. Seat the card firmly in the slot. If you do not properly seat the ...

Page 72 - Set the VPN Router 2750 on the rack-mount shelf in the rack.; Installing and replacing DIMMs

72 Chapter 4 Installing option cards and DIMMs NN46110-318 02.01 a Set the VPN Router 2750 on the rack-mount shelf in the rack. b Insert one of the panhead screws through the bottom hole on each side of the shelf into the hole in the rack, and tighten the screws ( Figure 4 on page 31 ). 12 Replace t...

Page 75 - Replace the top cover on the chassis (

Chapter 4 Installing option cards and DIMMs 75 Nortel VPN Router Installation — VPN Router 2750 10 Replace the top cover on the chassis ( Figure 21 on page 65 ). a Hold the cover at an angle, and slide it onto the chassis. b Insert the four screws that secure the cover to the chassis, and use the sc...

Page 77 - Chassis specifications; Physical, electrical, and environmental specifications

77 Nortel VPN Router Installation — VPN Router 2750 Appendix ATechnical specifications This appendix provides technical specifications for the VPN Router 2750 chassis and the chassis interfaces. Chassis specifications Table 18 lists physical, electrical, and environmental specifications for the chas...

Page 78 - Appendix A Technical specifications; System ports; serial port; Specification

78 Appendix A Technical specifications NN46110-318 02.01 System ports The VPN Router 2750 system board provides the following built-in interfaces: • two 10/100BASE-TX Ethernet local area network (LAN) ports • serial port This section provides information about the 10/100BASE-TX Ethernet LAN ports an...

Page 79 - Chapter 3, “Configuring the management IP interface,” on page 53; Pin

Appendix A Technical specifications 79 Nortel VPN Router Installation — VPN Router 2750 Figure 27 10/100BASE-TX Ethernet connector Table 19 provides the 10/100BASE-TX Ethernet port pinouts. Serial port The system board provides a serial port on the rear of the chassis to enable out-of-band managemen...

Page 80 - provides the multiple DB9/DB25 serial interface cable pinouts.; Modem cable specifications; Multiple DB9 and DB25 connector pinouts

80 Appendix A Technical specifications NN46110-318 02.01 Figure 28 Serial cable (9-pin D-sub plug to RS-232-C modem plug) Table 20 provides the multiple DB9/DB25 serial interface cable pinouts. Modem cable specifications If you need to connect a modem to a VPN Router 2750, you must obtain an appropr...

Page 81 - provides the modem cable pinouts.; Hardware option cards; Modem cable pinouts

Appendix A Technical specifications 81 Nortel VPN Router Installation — VPN Router 2750 Figure 29 Modem cable (9-pin D-sub plug to RS-232-C modem plug) Table 21 provides the modem cable pinouts. Hardware option cards The VPN Router 2750 provides four PCI slots that support a combination of the follo...

Page 82 - VPN Router Security Accelerator

82 Appendix A Technical specifications NN46110-318 02.01 • 1000BASE-T (1000 MT) Ethernet interface card • 1000BASE-SX Ethernet interface card • 56/64K CSU/DSU WAN interface card • ADSL WAN interface card • ISDN BRI interface card • T1 CSU/DSU WAN interface card (full-height card) • T1/E1 CSU/DSU WAN...

Page 84 - For complete information about the SSL VPN Module 1000 and

84 Appendix A Technical specifications NN46110-318 02.01 The SSL VPN Module 1000 is supported on VPN Router 5000, 2750, 2700, and 1750 gateways running VPN Router Version 5.0 software. You must install the SSL VPN Module 1000 in slot 1 of the VPN Router 5000, 2750, 2700, or 1750. The VPN Router gate...

Page 87 - shows the 1000BASE-T Ethernet interface card.; 000BASE-T Ethernet port pinouts

Appendix A Technical specifications 87 Nortel VPN Router Installation — VPN Router 2750 1000BASE-T (1000 MT) Ethernet interface card Use the 1000BASE-T Ethernet interface card to connect to Gigabit Ethernet interfaces on other devices in your network, as well as to provide increased throughput. This...

Page 88 - shows the 1000BASE-SX Ethernet interface card.; 000BASE-SX Ethernet interface card; -micron MMF cable: provides a distance range of 220–275 m

88 Appendix A Technical specifications NN46110-318 02.01 1000BASE-SX Ethernet interface card The 1000BASE-SX Ethernet interface card implements short-wavelength (850 nm) laser transmissions. Use this interface card to connect to fiber Gigabit Ethernet interfaces on other devices in your network, as ...

Page 89 - Nortel does not supply an interface cable with the

Appendix A Technical specifications 89 Nortel VPN Router Installation — VPN Router 2750 56/64K CSU/DSU WAN interface card The 56/64K CSU/DSU WAN interface card has a single RJ-48 connector that provides the signals needed to interface to network equipment. Figure 36 shows the 56/64K CSU/DSU WAN inte...

Page 90 - provides the 56/64K CSU/DSU cable pinouts for a crossover; 6/64K CSU/DSU cable pinouts for crossover connection

90 Appendix A Technical specifications NN46110-318 02.01 Table 24 provides the 56/64K CSU/DSU cable pinouts for a crossover connection. The cable operates properly if you do not connect pins 3, 4, 5, and 6. Table 25 provides the 56/64K CSU/DSU cable pinouts for a straight-through connection. Table 2...

Page 91 - shows the ADSL WAN interface card.; ADSL WAN interface card; provides the pinouts for the ADSL Annex A cable.; ADSL Annex A cable pinouts

Appendix A Technical specifications 91 Nortel VPN Router Installation — VPN Router 2750 ADSL WAN interface card The ADSL Annex A and Annex B WAN interface cards have a single RJ-11 connector that provides the signals needed to interface to the ADSL-provisioned telephone line. Figure 37 shows the ADS...

Page 92 - provides the pinouts for the ADSL Annex B cable.; ISDN BRI interface card; shows the ISDN BRI S/T interface card or the ISDN BRI U interface; ISDN BRI S/T or IDSDN BRI U; Nortel does not supply a cable with the ISDN BRI interface cards.

92 Appendix A Technical specifications NN46110-318 02.01 Table 27 provides the pinouts for the ADSL Annex B cable. ISDN BRI interface card The ISDN BRI S/T and ISDN BRI U interface cards have a single RJ-45 connector that provides the signals needed to interface to ISDN equipment. (To connect the IS...

Page 93 - provides the ISDN BRI S/T cable pinouts.; ISDN BRI S/T cable pinouts

Appendix A Technical specifications 93 Nortel VPN Router Installation — VPN Router 2750 Table 28 provides the ISDN BRI S/T cable pinouts. Table 29 provides the ISDN BRI U cable pinouts. Table 28 ISDN BRI S/T cable pinouts Pin Function 1 N/C 2 N/C 3 Receive + 4 Transmit + 5 Transmit - 6 Receive - 7 N...

Page 94 - For E1 service, you must install the half-height version of the

94 Appendix A Technical specifications NN46110-318 02.01 T1/E1 CSU/DSU WAN interface card The T1/E1 CSU/DSU WAN interface card has a single connector that provides the signals needed to interface to T1 or E1 equipment. This interface card ships as a half-height card and as a full-height card. Figure...

Page 95 - The cable operates properly if you do not; T1/E1 CSU/DSU cable pinouts for crossover connection; For crossover connections, do not use Ethernet cable. If you

Appendix A Technical specifications 95 Nortel VPN Router Installation — VPN Router 2750 You connect the T1/E1 CSU/DSU WAN interface card to the service provider network using a straight-through cable or a crossover cable, depending on how the service provider wired its jack. • For a straight-through...

Page 96 - provides the T1/E1 CSU/DSU cable pinouts for a straight-through; Nortel termination; Nortel does not supply cables with the quad T1/E1 CSU/DSU

96 Appendix A Technical specifications NN46110-318 02.01 Table 31 provides the T1/E1 CSU/DSU cable pinouts for a straight-through connection. Quad T1/E1 CSU/DSU WAN interface card The quad T1/E1 CSU/DSU WAN interface card has four connectors that provide the signals needed to interface to T1 or E1 e...

Page 97 - . For information about the cable pinouts for a straight-through; V.90 modem interface card

Appendix A Technical specifications 97 Nortel VPN Router Installation — VPN Router 2750 Use cable that is wired in accordance with EIA-568-A wiring style. This wiring style ensures that a twisted pair inside the patch cord carries the transmit signal (pins 4 and 5) and the receive signal (pins 1 and...

Page 98 - provides the V.90 modem port cable pinouts.; V.90 modem cable pinouts

98 Appendix A Technical specifications NN46110-318 02.01 Table 32 provides the V.90 modem port cable pinouts. Single V.35/X.21 WAN interface card The single V.35/X.21 WAN interface card has a single DB28S connector that provides the signals needed to interface to V.35 and X.21 equipment. Figure 43 o...

Page 100 - provides the X.21 cable pinouts. (The pair suffix A or B refers to an; Signal name

100 Appendix A Technical specifications NN46110-318 02.01 3. At each end, the cable shield and connector shell must connect respectively to pin A of the 34-pin connector and pin 1 of the standard 28-pin connector. 4. Do not connect Shield to Signal Ground because these are separate signals. Table 34...

Page 101 - shows the HSSI WAN interface card.; HSSI WAN interface card; provides the T3 cable pinouts.; T3 cable pinouts

Appendix A Technical specifications 101 Nortel VPN Router Installation — VPN Router 2750 The following notes apply to the single X.21 cable:1. Wires of pair 4 connect to wires of pair 5, but not to any pins in the DA-15.2. The term “no conn” means the wire is not connected to a pin in the 15-pin con...

Page 103 - Index; Numerics; See

Nortel VPN Router Installation — VPN Router 2750 103 Index Numerics 10/100BASE-TX Ethernet interface card 84 cable specifications 78connector 78described 84LEDs 42 10/100BASE-TX system LAN ports cable specifications 78connector 78LEDs 41 1000BASE-SX Ethernet interface card cable specifications 88con...