Nortel 1100 - Manuals

About the Expansion Module for IP Phone 1100 Series 8 Figure 1: IP Phone 1140E with Expansion Module Features The Expansion Module has the following features: • 18 keys provide up to 36 additional self-labeled line/programmable feature keys when using the Shift feature. Using the Shift key functiona...

About the Expansion Module for IP Phone 1100 Series 9 Adjusting the display The Expansion Module is equipped with a graphical, pixel-based, grayscale LCD display area beside the 18 line/feature keys (see Figure 1 on page 8). Each of the 18 physical keys on the Expansion Module has a 10-character dis...

Setup and assembly 10 Setup and assembly The Expansion Module mounts on the right side of the IP Phone. The Expansion Module snaps into the Accessory Expansion Module (AEM) on the back of the IP Phone using the desk-mount bracket and structural baseplate supplied with the Expansion Module.

Setup and assembly 11 Installing the Expansion Module Use the following instructions to install the Expansion Module. 1. Press the tilt lever to adjust the stand angle on the IP Phone. You can adjust the stand angle to maximum, instead of removing the stand. See Figure 2. CAUTION Damage to Equipment...

Setup and assembly 12 Figure 2: Adjusting the stand angle on the IP Phone 2. At the back of the IP Phone, remove the rubber plug from the AEM port. Place the connecting arm of the Expansion Module behind the IP Phone and align the Expansion Module connection plug to the AEM port on the back of the I...

Setup and assembly 13 Figure 3: Connecting the Expansion Module 4. If connecting a second, or a third Expansion Module, repeat steps 2 to 4. Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third Expansion Module is attached to the right side of the ...

Setup and assembly 14 Expansion Module startup initialization Once the Expansion Module has been installed and powered up on the IP Phone, the Expansion Module initializes. Table 1 lists the initialization process for the Expansion Module. Using the wall-mount option IP Phone and Expansion Module co...

Setup and assembly 15 Adjusting the tilt base The Expansion Module stand provides a continuous tilt adjustment so the tilt angle matches the IP Phone stand angle while accommodating variations in the desk surface. A clamp mechanism is used to unlock and lock the foot stand angle. The Expansion Modul...

Controls and settings 16 Controls and settings When an Expansion Module is installed on an IP Phone, the controls and settings of the IP Phone control both the IP Phone and the Expansion Module. Use the Telephone Options menu on the attached IP Phone to set the contrast and feature key labels of the...

Controls and settings 17 Press the Services key to access the following menu items: • Display diagnostics • Set Info Display diagnostics Use the Up/Down navigation keys to scroll the Display diagnostics menu to access the following screens/diagnostic operations: • initial screen • Full Contrast • LE...

Controls and settings 18 Table 2 shows the display diagnostic operation on the IP Phones and the Expansion Module. Table 2: Display diagnostic operation on the IP Phone and the Expansion Module Diagnostic step IP Phone DN/feature key display area Expansion Module for IP Phone 1100 Series area displa...

Regulatory and safety information 20 この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラスB 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 Table 3 lists EMC compliance for various jurisdictions. Other This equipment complies with the CE Marking requi...

Regulatory and safety information 21 DenAn regulatory notice for Japan

Terms you should know 23 Terms you should know Accessor y Expansion Module A built-in port on an Nortel IP Phone that enables accessory components (such as a Expansion Module for IP Phones 1100 Series) to connect and communicate with the IP Phone. Director y Number (DN) A one- to seven-digit number ...

Index 25 Index A Accessory Expansion Module (AEM) 23Auto Dial 23 D Directory Number (DN) 23Display 9Display label 9DN 23 F Feature display 23Features 8 I Initialize the IP Phone KEM 16Install the IP Phone KEM 10IP Phone 2002 7IP Phone 2004 7IP Phone KEM 7, 23IP Phone KEM controls and set-tings 16IP ...

Nortel Communication Server 1000 Expansion Module for IP Phone 1100 Series User Guide Copyright © 2006 Nortel Networks. All Rights Reserved. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are ...