Nilfisk ALTO 2 - Manuals

66 Original Instructions Poseidon 2 EN 3.4 Mounting of quick coupling 1. Screw the quick coupling tight on to the water inlet (2). Note: The inlet fi lter must al- ways be fi tted in the water inlet pipe to fi lter out sand, lime stone and other impurities as these will damage the pump valves. Cauti...

71 Poseidon 2 EN Original Instructions  6 After using your pressure washer 6.2 Winding up of electric cable and high pressure hose up carefully. 1. Wind up the electric cable on the appropriate hooks. Built-in clip for good holding. The lower hook can be turned to release the electric cable. 2. The...

72 Original Instructions Poseidon 2 EN WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice:  Wash off water hose, high pressure hose, spray lance and accessories before moun...

74 Original Instructions Poseidon 2 EN 9 Further information 9.1 Recycling the washer Make the old cleaner unusable immediately. 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli-ances with household waste. As specifi ed in European Direc- tive 2002/96/EC on old elect...

75 Poseidon 2 EN Original Instructions EU Declaration of Conformity Product: High Pressure Washer Type: Nilfi sk-ALTO Poseidon 2-20, 2-29 Nilfi sk-ALTO Poseidon 2-22 XT, 2-25 XT, 2-29 XT Description: 120 V, 230 V, 1~, 50 Hz - IP X5 The design of the unit corre sponds to the following pertinent regul...