Niles HPS-4/HPS-6 - Manuals

Niles HPS-4/HPS-6 – Manual in PDF format online.

Manuals:

Manual

Manual Niles HPS-4/HPS-6

Summary

Page 2 - TABLE OF CONTENTS; Introduction; Balancing Speaker Volume; SPECIFICATIONS; Frequency Response

Introduction The HPS series allows you to connect multiple pairs of speak-ers to your stereo receiver or amplifier and play any one pair,any combination of pairs, or all pairs at once. You don't haveto worry about overloading your amplifier. The HPS-4 andHPS-6 have a protection circuit that keeps yo...

Page 3 - Installation Considerations; Power Handling; Turn on the amplifier or receiver and select a source, such; “TECH TIP”; When playing the following speakers:; or 2 pairs of 8-ohm speakers; The Protection button should be:; OFF

Installation Considerations Power Handling The HPS series is designed for use with a receiver or amplifierhaving a maximum power output of 250 watts per channel at8 ohms. Damage caused by the use of a higher-power receiv-er or amplifier will void the warranty. Consult your Niles deal-er, or receiver...

Page 4 - Using the HPS Series with Tube-Type Amplifiers; Installation; Select a convenient mounting location.; “Tech Tip”; Figure 4; Installing the Connectors; Figure 3; Removing the Connectors

Using the HPS Series with Tube-Type Amplifiers Virtually all tube amplifiers must have a load connected at alltimes. If the amplifier to be connected to the HPS-4/HPS-6 is atube amplifier, be sure to always have at least one pair of speak-ers switched on at all times. An alternative is to permanentl...