Niles VCS HUB8 - Manual
Niles VCS HUB8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Removable connector blocks for convenient wire connections.; INSTALLATION CONSIDERATIONS; Calculating the Impedance Magnification Setting; Figure 1; TABLE OF CONTENTS; Introduction; VCS H U B 8
- Page 3 – Count; INSTALLATION; Figure 2; Figure 4
- Page 4 – SPECIFICATIONS
I N S T A L L A T I O N & O P E R A T I O N G U I D E
B
L E N D I N G
H
I G H
F
I D E L I T Y
A N D
A
R C H I T E C T U R E
®
Niles Audio Corporation
www.nilesaudio.com
12331 S.W. 130 Street
Miami, Florida 33186
Tel: (305) 238-4373
Fax: (305) 238-0185
© 2003 Niles Audio Corporation. All rights reserved. Niles, the Niles logo, and Blending Technology and Architecture are reg-
istered trademarks of Niles Audio Corporation. Decora is a registered trademark of Leviton Manufacturing. All other trademarks
are the property of their respective owners. Some of Niles products (or components thereof) are manufactured under one or
more U.S. Patents, foreign equivalents and/or pending patents (see product for details). Because we constantly strive to improve
our products, Niles reserves the right to change product specifications, descriptions, and prices without notice. The technical
and other specifications of information contained herein is not intended to set forth all technical and other specifications of Niles
products. Additional information can be obtained at www.nilesaudio.com or by calling Niles at 1-800-289-4434. Printed in
China 7/03 DS00312BCN
VCS HUB8
VCS HUB8
Volume Control Distribution Hub
DS00312BCN/VCS HUB 8 11/12/03 10:40 AM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION The VCS HUB8 is a speaker distribution hub that mounts in a structured-wiring cabinet or ona wall. It connects between the speaker-level output of an amplifier or receiver and the Nilesvolume controls that adjust the sound level of your speakers. A system with volume controls for multip...
CAUTION! Every speaker pair in the system must be con-nected to an impedance-magnifying volume control and set tothe same magnification. When you install the VCS HUB8 and connect the volume controls to it, doublecheck the switches on the volume controls to verify that they are set correctly for the ...
the screws to the mounting surface. TAKE CARE NOT TOOVERTIGHTEN THE SCREWS, WHICH COULD DAMAGETHE HOUSING. 3. Locate the connector plugs (and remove them if they are plugged in). 4. Strip 1/4" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain...
