Netgear FSM7352S - Manuals

Netgear FSM7352S – Manual in PDF format online.

Manuals:

Manual

Manual Netgear FSM7352S

Summary

Page 3 - CONTENTS; Page of 24

CONTENTS CHAPTER 1: INTRODUCTION ...............................................................................................................................5 Overview ....................................................................................................................................

Page 5 - CHAPTER 1: INTRODUCTION; Overview; Switches to each other with high-speed links

CHAPTER 1: INTRODUCTION Congratulations on your purchase of a NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch! Your NETGEAR Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who want ease of use along with powerful management fea...

Page 6 - Features

Features The following list identifies the key features of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. • Forty-eight 10/100Mbps and four 10/100/100 Mbps auto sensing Fast Ethernet TP ports • Four SFP modules combo (shared with TP) with GTP for a variety of fiber connec...

Page 7 - Package Contents

o Full-duplex IEEE 802.3x pause frame flow control • Multiple interfaces to access the management features o Browser-based Graphical User Interface (GUI) o Command Line Interface (CLI) o Telnet or Console o Standards-based and Private Enterprise SNMP MIBs • Automatic hardware configuration on all Et...

Page 8 - Verify that your package contains the following:

Figure 1-1. Package Contents Verify that your package contains the following: FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch Rubber footpads for tabletop installation Rubber caps for the 4 SFP sockets Power cord Null-modem console cable Rack-mount kit for installing the switch in a 19-inch ...

Page 9 - CHAPTER 2: PHYSICAL DESCRIPTION; Front and back panels; Front and Back Panels; Senses whether the cable is a straight-through or crossover cable.

CHAPTER 2: PHYSICAL DESCRIPTION This chapter describes the hardware features of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Topics include: Front and back panels 48 10/100 Mbps and 4 10/100/1000 Mbps auto-sensing RJ-45 ports SFP module bay LED descriptions Console port...

Page 10 - SFP module bay

establish a link with non-stacking interfaces no traffic will pass across the interface. These interfaces are available to quickly and easily build a stack of switches by simply connecting two or more FSM7300 switches together with either Category 5 copper Ethernet cables or with SFP-based fiber con...

Page 11 - LED Descriptions; Label; Green on –; Console Port; Console; and; required for initial management configuration; of

LED Descriptions The front panel of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet SFP ports also have LEDs that show link and activity status. Table 2-1 summar...

Page 12 - The console port is configured to use the following settings:

The console port is configured to use the following settings: • Baud rate: 9,600 bps • Data bits: 8 • Parity: none • Stop bit: 1 • Flow control: none These settings appear below the connector on the switch front panel. In addition to using the console port, you can manage the switch using a Web brow...

Page 13 - CHAPTER 3: INSTALLATION; Step 1: Preparing the Site; Characteristics; Mounting; Operating conditions:

CHAPTER 3: INSTALLATION This chapter describes the installation procedures for your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Switch installation involves the following steps: Step 1: Preparing the site Step 2: Installing the switch Step 3: Checking the installation Step...

Page 14 - Step 2: Installing the Switch; Installing the Switch on a Flat Surface; Step 3: Checking the Installation

Step 2: Installing the Switch You can install your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each...

Page 15 - When you apply power, the; LED on the switch’s front panel will be Yellow, as it conducts a Power; Power; LED will change to Green and the; Power; LED will blink in yellow.; Power; Step 5: Connecting Devices to the Switch; Step 6: Installing a SFP Module

1. Connect the female end of the supplied AC power adapter cable to the power receptacle on the back of the switch. 2. Connect the 3-pronged end of the AC power adapter cable to a grounded 3-pronged AC outlet. When you apply power, the Power LED on the switch’s front panel will be Yellow, as it cond...

Page 17 - show sysinfo; ”, and it will display the; Changing protocol mode will reset ip configuration.; After system prompt return, enter the following command

Figure 3-4. System Information. 5. The login name is “admin”. And there is no password assigned. We strongly recommend you enable password for admin access to secure access to the switch management function. After successful login, the screen should show (FSM7352S)> prompt. Enter “ show sysinfo ”...

Page 18 - Step 8: Connecting the stacking modules

Sysinfo page. To use your web browser, simply type the IP address in the URL address bar and hit enter. If you want to use an SNMP management application, you will need to note the IP address and to configure the SNMP settings in your switch so that it will respond to SNMP requests. This configurati...

Page 19 - APPENDIX A: TECHNICAL SPECIFICATIONS; Network Protocol and Standards Compatibility

APPENDIX A: TECHNICAL SPECIFICATIONS This appendix provides technical specifications for the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Network Protocol and Standards Compatibility IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX IEEE 802.3ab 1000BASE-T ...

Page 20 - Power Consumption: 80 W maximum

Secured Shell (SSHv1,v2) Interface 48 RJ-45 connectors for 10BASE-T and 100BASE-TX (Auto Uplink™ on all ports) 4 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports) 4 Gigabit Interface Converter (SFP) slots for SFP modules RS-232 Console Port LEDs Per port (10/100 f...

Page 21 - Safety

EN 55024 Safety CE mark, commercial CSA certified (CSA 22.2 #950) UL listed (UL 1950)/cUL IEC950/EN60950 Page 21 of 24

Page 22 - APPENDIX B: TROUBLESHOOTING; Troubleshooting Chart; Symptom; No power is received; Link; LED is off or intermittent.; Additional Troubleshooting Suggestions

APPENDIX B: TROUBLESHOOTING This chapter provides information about troubleshooting the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Topics include: Troubleshooting chart Additional troubleshooting suggestions Troubleshooting Chart Table B-1 lists symptoms, causes, and solu...

Page 24 - APPENDIX C: Default Settings

APPENDIX C: Default Settings This appendix provides the default settings for the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Feature FSM7352S Default Setting Port Speed Auto-negotiation Port Duplex Auto-negotiation Flow Control (half duplex) Enabled Flow Control (full dupl...