NetComm NB504 - Manuals
NetComm NB504 – Manual in PDF format online.
Manuals:
Manual NetComm NB504
Summary
����4 ��e�� ����e YML864Rev1 www.netcomm.com.a� CoNteNts Package Contents .........................................................................................................................................4Chapter 1: About this Guide ...............................................................
����4 ��e�� ����e YML864Rev1 4 www.netcomm.com.a� PACkAGe CoNteNts The following contents should be found in your box: • One NB504 54Mbps Wireless Router • One AC power Adapter for NB504 54Mbps Wireless Router • Quick Installation Guide • One Resource CD for NB504 54Mbps Wireless Router, including: ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� � ChAPteR 1: ABoUt thIs GUIDe Thank you for choosing the NB504 54Mbps Wireless Router. This router provides dedicated solution for Small Office/Home Office (SOHO) networks. With your network all connected, your local wired or wireles...
����4 ��e�� ����e YML864Rev1 6 www.netcomm.com.a� ChAPteR 2: INtRoDUCtIoN 2.1 overview of the Router The NB504 54Mbps Wireless Router integrates 4-port Switch, firewall, NAT-router and Wireless AP. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions. The NB504 54Mbp...
����4 ��e�� ����e YML864Rev1 8 www.netcomm.com.a� 2.3 Panel Layout 2.3.1 the Front Panel The front panel of the NB504 consists of several LED indicators, which is designed to indicate connections. View from left. Table 2-1 describes the LEDs on the front panel of the router. Figure 2-1 Front Panel N...
����4 ��e�� ����e YML864Rev1 1� www.netcomm.com.a� ChAPteR 3: CoNNeCtING the RoUteR 3.1 system Requirements • Broadband Internet Access Service (DSL/Cable/Ethernet) • One DSL/Cable modem that has an RJ45 connector • Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 11 3.3 Connecting the Router Before you install the router, you should connect your PC to the Internet through your broadband service successfully. If there is any problem, please contact your ISP. After that, please install the rout...
����4 ��e�� ����e YML864Rev1 1 www.netcomm.com.a� ChAPteR 4: QUICk INstALLAtIoN GUIDe After connecting the NB504 Router into your network, you should configure it. This chapter describes how to configure the basic functions of your NB504 Wireless Router. These procedures only take you a few minutes....
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 1 Open a command prompt, and type ping 192.168.1.1, then press Enter . If the result displayed is similar to that shown in figure 4-1, the connection between your PC and the router has been established. Figure 4-1 Successful result o...
����4 ��e�� ����e YML864Rev1 14 www.netcomm.com.a� 4.2 Quick Installation Guide With a Web-based (Internet Explorer or Netscape® Navigator) utility, it is easy to configure and manage the NB504 54Mbps Wireless Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a web ...
����4 ��e�� ����e YML864Rev1 16 www.netcomm.com.a� If you Choose “ Static IP ”, the Static IP settings page will appear, shown in figure 4-8: Figure 4-8 Quick Setup - Static IP �ote - The IP pa��amete��� �ho�l� have been p��ov��e� by yo��� ISP. • IP Address - This is the WAN IP address as seen by ex...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 1 After you complete the above, click Next , the Wireless settings page will appear, shown in figure 4-9. Figure 4-9 Quick Setup - Wireless settings In this page, you can configure the following wireless parameters: • Wireless Radio ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 1 ChAPteR 5: CoNFIGURING the RoUteR This chapter describes each web page’s key functions. 5.1 login After your successful login, you can configure and manage the router. There are ten main menus on the left of the web-based utility. ...
����4 ��e�� ����e YML864Rev1 www.netcomm.com.a� 5.3 Quick setup Please refer to Section 4.2: “Quick Installation Guide.” 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown in figure 5-2): LAN, WAN and MAC Clone . Click any of them, and you will be able to ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 5.4.2 WAN You can configure the WAN port parameters on this page. First, please choose the WAN Connection Type (Dynamic IP/Static IP/PPPoE/802.1X + Dynamic IP/802.1X + Static IP/BigPond Cable/L2TP/PPTP) for Internet. The default type...
����4 ��e�� ����e YML864Rev1 6 www.netcomm.com.a� Click the Connect button to connect immediately, Click the Disconnect button to disconnect immediately. Click the Advanced Settings button to set up the advanced option, the page shown in figure 5-7 will then appear: Figure 5-7 PPPoE Advanced Setting...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 1 8. If you choose PPTP, you should enter the following parameters (figure 5-12): Figure 5-12 PPTP Settings • User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. • Dynamic IP/ ...
����4 ��e�� ����e YML864Rev1 4 www.netcomm.com.a� 5.5 Wireless Figure 5-14 Wireless menu There are three submenus under the Wireless menu (shown in figure 5-14): Wireless Settings, MAC Filtering and Wireless Statistics . Click any of them, and you will be able to configure the corresponding function...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� � 5.5.1 Wireless settings The basic settings for the wireless network are set on this page, figure 5-15: Figure 5-15 Wireless Settings • SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wirele...
����4 ��e�� ����e YML864Rev1 4 www.netcomm.com.a� 5.6 DhCP Figure 5-19 The DHCP menu There are three submenus under the DHCP menu (shown in figure 5-19): DHCP Settings, DHCP Clients List and Address Reservation . Click any of them, and you will be able to configure the corresponding function. The de...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 4 5.6.1 DhCP settings The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN. The DHCP Server can be...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 4� 5.6.3 Address Reservation When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 4 5.7.2 Port triggering Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT router. Port Triggering is used for some of t...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� � 5.8 security Figure 5-31 The Security menu There are six submenus under the Security menu (shown in figure 5-31): Firewall, IP Address Filtering, Domain Filtering, MAC Filtering, Remote Management and Advanced Security . Click any ...
����4 ��e�� ����e YML864Rev1 �4 www.netcomm.com.a� 5.8.1 Firewall Using the Firewall page (shown in figure 5-32), you can turn the general firewall switch on or off. The default setting for the switch is off. If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and MAC ...
����4 ��e�� ����e YML864Rev1 6 www.netcomm.com.a� 5.8.6 Advanced security Using Advanced Security page (shown in figure 5-40), you can protect the router from being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN. Figure 5-40 Advanced Security settings • Packets Statistic interval (5 ~ ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 6 • Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enabled, the ping packet from the LAN port cannot access the router. (Defends a...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 6 5.10 static Routing A static route is a pre-determined path that network information must travel to reach a specific host or network. To add or delete a route, work in the area under the Static Routing page (shown in figure 5-47). ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 5.12.2 Firmware The page (shown in figure 5-54) allows you to upgrade the latest version firmware to keep your router up-to-date. Figure 5-54 Firmware Upgrade New firmware is posted at www.netcomm.com.au and can be downloaded for fre...
����4 ��e�� ����e YML864Rev1 4 www.netcomm.com.a� 5.12.3 Factory Defaults This page (shown in figure 5-55) allows you to restore the factory default settings for the router. Figure 5-55 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. • Th...
����4 ��e�� ����e YML864Rev1 6 www.netcomm.com.a� 5.12.7 Log This page (shown in figure 5-59) allows you to query the logs of the router. Figure 5-59 System Log The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh th...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 5.12.8 statistics The Statistics page (shown in figure 5-60) displays the network traffic of each PC in LAN, including total traffic and traffic of the last Packets Statistic interval seconds. Figure 5-60 Statistics • Current Statist...
����4 ��e�� ����e YML864Rev1 8� www.netcomm.com.a� 3. I want to use Netmeeting, what do I need to do? 1) If you start Netmeeting as a sponsor, you don’t need to do anything with the router. 2) If you start as a responsor, you need configure Virtual Server or DMZ Host. 3) How to configure Virtual Ser...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 8 APPeNDIx B: CoNFIGURING the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed. 1. Insta...
����4 ��e�� ����e YML864Rev1 84 www.netcomm.com.a� 2. Configure tCP/IP for your computer 1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel. 2) Double-click the Network icon, highlight the bound TCP/IP tab in the appearing Network window that appears. ...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 8� Figure B-5 Gateway tab c. Choose Disable DNS on the DNS configuration tab, as shown in the following figure: Figure B-6 DNS Configuration tab • Setting IP address manually a.Select Specify an IP address on IP Address tab, as shown...
����4 ��e�� ����e YML864Rev1 88 www.netcomm.com.a� APPeNDIx C: sPeCIFICAtIoNs General standards IEEE 802.3, 802.3u, 802.11b and 802.11g Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MD...
����4 ��e�� ����e YML864Rev1 � www.netcomm.com.a� APPeNDIx e: LeGAL & ReGULAtoRY INFoRMAtIoN This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrie...
YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e www.netcomm.com.a� 1 Product Warranty The warranty is granted on the following conditions: 1. This warranty extends to the original purchaser (you) and is not transferable; 2. This warranty shall not apply to software programs, batteries, power supplie...
����4 ��e�� ����e YML864Rev1 www.netcomm.com.a� Product Warranty NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option, via registering your product online at the NetComm website www.netcomm.com.au . Refer to the User Guide ...
NetComm Manuals
-
NetComm N3G005W
Manual
-
NetComm NP3640
Manual
-
NetComm NB5PLUS4W
Manual
-
NetComm 5330
Manual
-
NetComm NP745n
Manual
-
NetComm II 128 USB
Manual
-
NetComm NP644
Manual
-
NetComm V110
Manual
-
NetComm NB5PLUS4
Manual
-
NetComm 3100
Manual
-
NetComm NP7042
Manual
-
NetComm 85Mbps
Manual
-
NetComm NB1300
Manual
-
NetComm NP545
Manual
-
NetComm V25
Manual
-
NetComm SCINTRA600
Manual
-
NetComm AM5055
Manual
-
NetComm NP6800
Manual
-
NetComm NP1100
Manual
-
NetComm 5340
Manual