NetComm NB1300 - Manual - manualsarea.com

Page 2 - Contents

www.netcomm.com.au Rev. 2 - YML643 Page 2 NB1300 ADSL Modem Contents Introduction .................................................................................................................... 3 Which configuration is best? .........................................................................

Page 3 - Introduction; Which configuration is best?

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 3 Introduction This guide is supplied to help you connect your NB1300 ADSL Modem quickly to yournetwork or Windows computer. If the NB1300 has already been used, we strongly recommend you reset and flush all settings ofthe unit via the USB ca...

Page 4 - Package Contents; Quick Start Guide; Factory Defaults; Field; admin

www.netcomm.com.au Rev. 2 - YML643 Page 4 NB1300 ADSL Modem Package Contents The following items should be contained in your NB1300 ADSL Modem Package: ■ Quick Start Guide ■ ADSL Modem (NB1300) ■ Power adaptor (12V AC / 1Amp) ■ Telephone line cable (RJ11) ■ Crossover network cable (RJ45) ■ NetComm C...

Page 5 - Do I need a Micro filter?

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 5 Do I need a Micro filter? Micro filters are used to prevent common telephone equipment, such as phones, answeringmachines and fax machines, from interfering with your ADSL service. If your ADSL enabledphone line is being used with any other...

Page 6 - Ethernet Gateway Configuration; Either a Network Hub and two UTP cables OR one Crossover UTP cable.; Step 1: Connecting your computer to the NB1300; Ensure that there is a LAN link light on the NB1300.

www.netcomm.com.au Rev. 2 - YML643 Page 6 NB1300 ADSL Modem Ethernet Gateway Configuration Before continuing, ensure you have the following items and information ready: ■ A Windows 98, ME, NT, 2000 or XP client machine with a Network Interface Cardinstalled. ■ Either a Network Hub and two UTP cables...

Page 8 - Any name to describe your ISP

www.netcomm.com.au Rev. 2 - YML643 Page 8 NB1300 ADSL Modem Field Setting Details Service name: Any name to describe your ISP User Name: Your ISP will provide a case sensitive User Name in aformat similar to your email address. Contact your ISPfor details Password: Enter your Password as supplied by...

Page 9 - Step 3: Configuring your Computer to use the NB1300

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 9 Step 3: Configuring your Computer to use the NB1300 To use the NB1300 ADSL Modem to access the Internet, your computer must have an IPAddress that is in the same LAN subnet as the NB1300 ADSL Router and use the NB1300ADSL Router’s IP addres...

Page 10 - Connect the power and switch the NB1300 on.

www.netcomm.com.au Rev. 2 - YML643 Page 10 NB1300 ADSL Modem Ethernet Modem (Bridge) Configuration Before continuing, ensure you have the following items and information ready: ■ A computer with a Network Interface Card installed or a router (such as the NetCommNB3100). ■ A Crossover UTP cable. ■ A ...

Page 11 - Click on the One Page Setup link under the Basic menu.

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 11 Step 2: Configuring the NB1300 1. After connecting all the ADSL Router cables, powering on the ADSL Router, and launching a web browser, such as Internet Explorer or Netscape Navigator, browse to the addresshttp://192.168.1.1. 2. Enter the...

Page 12 - Blank; Step 3: Configuring your Computer/Router to use the NB1300; ISP Software Method

www.netcomm.com.au Rev. 2 - YML643 Page 12 NB1300 ADSL Modem Field Setting Details Service name: Blank ❖ User Name: Blank ❖ Password: Blank ❖ Disconnect timeout: 0 ❖ Mode/Wan Connection Type: 1483 Bridged IP LLC VPI: 8 ❖ VCI: 35 ❖ Static IP Address: 192.168.241.101 ❖ Subnet Mask: 255.255.255.0 ❖ Def...

Page 13 - A telephone line with ADSL service enabled.; to search for drivers choose “Specify location”.

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 13 USB Gateway (Router) Configuration Before continuing, ensure you have the following items and information ready: ■ A Windows 98SE, ME, 2000 or XP client machine. ■ A telephone line with ADSL service enabled. ■ User Name, Password, VPI, VCI...

Page 15 - Any name to describe your ISP.

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 15 Field Setting Details Service name: Any name to describe your ISP. User Name: Your ISP will provide a case sensitive User Name in aformat similar to your email address. Contact your ISPfor details. Password: Enter your Password as supplied...

Page 16 - Trouble Shooting; Resetting the NB1300 ADSL Modem; Registering your NetComm Product; Contact Information

www.netcomm.com.au Rev. 2 - YML643 Page 16 NB1300 ADSL Modem Trouble Shooting Resetting the NB1300 ADSL Modem When the Ethernet cable cannot be used due to an unknown or inaccessible IP address, you willneed to reset the NB1300 ADSL Modem to its factory defaults. To reset the ADSL Modem toits factor...

Page 17 - Warranty Registration Form; The following information is vital for your warranty; Make sure; Cut along the line

Warranty Registration Form Date of Purchase ….......…………...........………................................. Name ….......…………...........………................................. Company ….......…………...........………................................. Address ….......…………...........………................................

Page 19 - Product Warranty; Limitations of Warranty

Rev. 2 - YML643 www.netcomm.com.au NB1300 ADSL Modem Page 19 Product Warranty The warranty is granted on the following conditions: 1. This warranty extends to the original purchaser (you) and is not transferable; 2. This warranty shall not apply to software programs, batteries, power supplies, cable...

NetComm NB1300 - Manual

Table of Contents:

Summary

Other NetComm Models