NetComm IP DSLAM - Manuals

NetComm NCT240 Management Guide Release 1.0 2.1.3 SNMP setup This page is for configuring the built in SNMP agent, NCT240 support SNMP V2c SNMP set community: SNMP get community: SNMP trap community and the Trap receiver IP address 2.1.4 General setup 10

NetComm NCT240 Management Guide Release 1.0 Display and Edit General information Host Name : NCT240 Host name Location : NCT240 location Contact Person’s Name: maintainer’s name Model: NCT240 model User Time Server When Bootup: Select time service protocol during bootup. Time Server IP Address: IP a...

NetComm NCT240 Management Guide Release 1.0 2.1.6 Synchronization with Time server (SNTP) 2.1.7 User Management Add, delete and Modify user information 2.1.8 Log out 12

NetComm NCT240 Management Guide Release 1.0 2.1.9 Server services 2.1.10 Alarm This page is used for displaying current alarms and alarm history, Display current alarms or Alarm history, 2.1.11 Daisy control Please refer to the application note on Daisy control for more details 13

NetComm NCT240 Management Guide Release 1.0 2.1.12 Software upgrade and Configuration backup Page for setting the FTP server settings Page for selecting which file to upgrade Page to back the files 14

NetComm NCT240 Management Guide Release 1.0 2.2 ADSL 2.2.1 xDSL port setup Enable and Disable ADSL ports, map ADSL profiles to each port individually, copy settings of one port to another port 2.2.1.1 Map profile 15

NetComm NCT240 Management Guide Release 1.0 2.2.2 Multiple port xDSL set up This page is used for configuring several ports with the same configuration: After selecting the ports, click on Apply: 18

NetComm NCT240 Management Guide Release 1.0 2.2.3 xDSL profiles 2.2.3.1 Port profile ADSL profiles can be added and deleted using this page 2.2.3.2 VC profile VC profile can be added using this page 19

NetComm NCT240 Management Guide Release 1.0 2.2.3.3 Alarm profile SET alarm profile 2.2.3.4 Map alarm profile Map the Alarm profile 20

NetComm NCT240 Management Guide Release 1.0 2.2.4 Line Diagnostic – DELT 2.3 Switch 2.3.1 VLAN Default VLAN Stack VLAN Priority Tag mode Strip mode 21

NetComm NCT240 Management Guide Release 1.0 Forwarding method Frame types 2.3.2 Ethernet Port Setting Uplink 1 and 2 enable and disable Flow control configuration 22

NetComm NCT240 Management Guide Release 1.0 2.3.3 MAC management This page is used for setting up the MAC aging time for the L2 switch feature in NCT240 and for setting up the MAC filter, MAC aging time setting – Default is NO MAC ageing MAC filter settings, up to 20 MAC addresses can be added to th...

NetComm NCT240 Management Guide Release 1.0 Display the channel status of each port Upstream and Downstream. 2.4.2 Line status Display the Line status for each line. 2.4.4 Line state This page displays the current state of the line. 27

NetComm NCT240 Management Guide Release 1.0 2.5 IP 2.5.1 IP setup For Setting IP, Net mask and Default gateway for two 1000base uplink ports. For setting IP, Net mask and Default gateway for the Management 100base Ethernet port. 2.5.2 ARP table Display and flush For display and Flush ARP table 28

NetComm NCT240 Management Guide Release 1.0 2.5.3 PING function For pinging any IP address for diagnostic purposes. 2.5.4 VLAN (For management ) 2.6 Performance 2.6.1 ADSL performance For 15 minutes to 1days performance data for NCT240 29

NetComm NCT240 Management Guide Release 1.0 2.7 Statistics 2.7.1 Gigabit Ethernet port counters 2.7.2 Utopia counter Port 1~8 = Utopia port 0~7 Port 9~16 = Utopia port 32~39 Port 17~24 = Utopia port 64~71 2.7.3 VCC counter 30

NetComm NCT240 Management Guide Release 1.0 3. Configuring NCT240 by CLI Interface To use “windows hyper terminal” to get into CLI interface, a configuration need to be set as the method below: GOTO – Start > Programs > Accessories > Communications > HyperTerminal Creating a New connecti...

NetComm NCT240 Management Guide Release 1.0 Select the comport the device is connected to - (if you are using a computer with a built in com-port the port number will be COM1 or COM2 but if you are using a RS232 to USB converter the number of com-port can be any other number ) Set the port settings ...

NetComm NCT240 Management Guide Release 1.0 After completing the initial setup, GOTO – File > Properties > settings And do the settings according to the window below. Log in Process When connected to the CLI please use the username/password – admin/admin ; BAS login : admin Password: admin BAS...

NetComm NCT240 Management Guide Release 1.0 This chapter introduces the command line interface and lists the available commands. It is divided into 7 topics: 1. System:- Deal with system configuration and maintenance. 2. ADSL:- Introducing and configuring ADSL parameters. 3. Status :- Display the sy...

NetComm NCT240 Management Guide Release 1.0 Command format Some commands required parameter(s). The number of parameter required is different for each command. To know each command’s parameters, just type the command name. For example, to know the command format for XXX , you can type XXX ; the scre...

NetComm NCT240 Management Guide Release 1.0 SYSTEM: These are the commonly used commands that belong to the sys (system) group of commands as the figure 2. You can input “help” or “?” for help. BAS/sys>help help Display command list ? Display command list daisycontrol The management of daisy chai...

NetComm NCT240 Management Guide Release 1.0 Command usage : BAS0/sys>daisy The management of daisy chain. Usage: daisycontrol <show|setdevice|settarget|tsetslavenum|tshowslavenum> show Display the settings of daisy chain management. setdevice Set the local device ID. settarget Set the targe...

NetComm NCT240 Management Guide Release 1.0 Info This command shows general system setting about switch name, switch location, contact person and contact phone number. Syntax: info <show | switchname | location | contact | phone> ¾ show – list all the settings of the info menu ¾ switchname – s...

NetComm NCT240 Management Guide Release 1.0 Command usage : BAS/sys>user Setup user information. Usage: user <add| del| list| online| passwd> add Add an account and assign it's group. del Delete an account. list List all registered users in the system online List all online users in the sys...

NetComm NCT240 Management Guide Release 1.0 SNMP This command is for configuring SNMP agent: Syntax: snmp <show|getcommunity|setcommunity|trapcommunity> ¾ show Display SNMP settings. ¾ getcommunity Set the SNMP GetRequest community. ¾ setcommunity Set the SNMP SetRequest community. ¾ trapsetti...

NetComm NCT240 Management Guide Release 1.0 Syslog syslog is a utility for tracking and logging all manner of system messages from the merely informational to the extremely critical. Each system message sent to the syslog server has two descriptive labels associated with it that makes the message ea...

NetComm NCT240 Management Guide Release 1.0 Time This command can display and set system’s time. Syntax: time <show | set> ¾ show – display system time ¾ set – set system time Command usage: ¾ set time use this format hh:mm:ss ¾ NCT240 uses 24 hours format BAS/sys>time The system's current ...

NetComm NCT240 Management Guide Release 1.0 Command usage: ¾ set date use this format yyyy:mm:dd BAS/sys>date The system's current date Usage: date <show| set> show Display the system's current date. set Set the system's date. date command Timeserver This command can display and use system’...

NetComm NCT240 Management Guide Release 1.0 Alarm Syntax: alarm <show> show Display the recorded system alarm. alarm show <current|history> Command usage: BAS0/sys>alarm The recorded system alarm. Usage: alarm <show> show Display the recorded system alarm. BAS0/sys>alarm show...

NetComm NCT240 Management Guide Release 1.0 ADSL: This chapter explains how to configure NCT240 system’s ADSL ports. It also covers how to configure virtual channels and virtual channel profiles. A profile is a table that contains a list of pre-configured ADSL settings. Each ADSL port has one profil...

NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/adsl>enable Turn on the specified ADSL ports Usage: enable portlist (1-24) BAS/adsl>enable 1~24 (will enable all the ports) enable command Disable Syntax: disable <port> ¾ disable an ADSL port Command usage: BAS/adsl>disab...

NetComm NCT240 Management Guide Release 1.0 Profile Syntax: profile <show| set| delete| map> ¾ show –show an ADSL profile ¾ set – create an ADSL line profile downstream max rate – downstream minimum rate ¾ delete – remove an ADSL profile ¾ map – assign a specified profile to a port and set the...

NetComm NCT240 Management Guide Release 1.0 Line diagnostic Syntax: linediag <port number> ¾ Run line diagnostic on the specified port Command usage: BAS/adsl>linediag Usage: linediag Set the specified port to line diagnostics and display the result. Vcprofile Syntax: vcprofile <show| se...

NetComm NCT240 Management Guide Release 1.0 Alarmprofile Syntax: alarmprofile <show| set| delete| map> ¾ show – display alarm profiles and their settings ¾ set – configure an alarm profile ¾ delete – remove an alarm profile ¾ map – map specified ADSL ports to an alarm profile Command usage: BA...

NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/adsl>pvc Display, create, modify, and remove a PVC setting Usage: pvc <list|show| set| delete> list List all mapped vcprofiles for all port. show Display PVC settings. set Create or modify a PVC setting. delete Remove a PVC sett...

NetComm NCT240 Management Guide Release 1.0 Linestatusget This command will list the line status. Syntax: linestatusget Command usage: BAS/status>linestatusget line status get Usage: linestatusget nLine(1-24) nDirection(0-1) linestateget command Linestateget This command will list the line states...

NetComm NCT240 Management Guide Release 1.0 SWITCH: This chapter will guide user how to configure the NCT240 switch features. help Display command list ? Display command list queuemap The system's priority level to physical queue mapping vlan Setting VLAN portvlan Setting port based vlan group mac 8...

NetComm NCT240 Management Guide Release 1.0 VLAN Usage: vlan <show|portshow|basicset|advset|switchmode|frametype> ¾ show Display VLAN settings. ¾ portshow Display the port(s) VLAN settings. ¾ basicset Basic Configuration of a VLAN entry. ¾ advset Advanced Configuration of a VLAN entry. ¾ switc...

NetComm NCT240 Management Guide Release 1.0 802.1x Syntax: 802_1x <show|portmode|enable|disable|portenable|portdisable|config|timer> ¾ show - Display IEEE 802.1X settings. ¾ Enable - Enable 802.1x protocol ¾ disable - Disable 802.1x protocol ¾ portmode - Set portmode on special ports ¾ portena...

NetComm NCT240 Management Guide Release 1.0 Looptest Using this command you can diagnostic this device through four ways loops. Syntax: looptest <ingutopia|egutopia|ingge0|egge0|disable> ¾ ingutopia - LoopLine Interface, UTOPIA Ingress Loop enable ¾ egutopia - LoopLine Interface, UTOPIA Egress...

NetComm NCT240 Management Guide Release 1.0 Command usage: BAS/ip>show ixp0 ip addr: 192.168.1.1 mac addr: 00:aa:aa:aa:aa:aa gateway: 0.0.0.0 net mask: 255.255.255.0 eth0 ip addr: 192.168.0.1 mac addr: 00:05:ca:00:04:10 gateway: 0.0.0.0 net mask: 255.255.255.0 Figure 29 ： show command Arp Syntax:...

NetComm NCT240 Management Guide Release 1.0 Command usage: set <ip|netmask|mac|vlan> set ip <device ID> <ip> set netmask <device ID> <netmask> set mac <device ID> <MAC> set vlan <enable|disable> <VID> Gateway Use this command to establish a stati...

NetComm NCT240 Management Guide Release 1.0 Command usage : ping <ip> <count> STATISTICS: Use these commands to display ADSL statistics. help Display command list ? Display command list adsl Display DSL statistics ethuto Display UTOPIA|VCC|ETHER|GE data exit Return to upper level Figure ...

NetComm NCT240 Management Guide Release 1.0 Ethuto Syntax: ethuto <utopia| vcc| ether| ge| vcencapgroup| exception> ¾ utopia –display UTOPIA port rx and tx counters ¾ vcc –display Vcc interface rx and tx counters ¾ ether –display ether interface rx and tx counters ¾ ge – display ge port rx and...

NetComm NCT240 Management Guide Release 1.0 Save This command saves all system configurations to nonvolatile memory. You must use this command to save any configuration changes that you make, otherwise the NCT240 will ignore the changes. Save your changes after each configuration session. Syntax: sa...

NetComm NCT240 Management Guide Release 1.0 4. Troubleshooting Troubleshooting guide Trouble Possible cause Solution PWR indicator does not light up after power on. Power outlet, power cord, or internal power supply may be defective. • Check the power outlet by plugging in another device that is fun...

NetComm NCT240 Management Guide Release 1.0 Cannot ping uplink 65

NetComm NCT240 Management Guide Release 1.0 6. Glossary 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX IEEE 802.3u specification for 100 Mbps Fast Ethernet over two pairs of Category 5 UTP cable. 100BASE-FX IEEE 802.3u specification...

NetComm NCT240 Management Guide Release 1.0 A Virtual LAN is a collection of network nodes that share the same collision domain regardless of their physical location or connection point in the network. A VLAN serves as a logical workgroup with no physical barriers, allowing users to share informatio...