Navman W300 - Manuals - manualsarea.com

Page 2 - NAVMAN

Page 3 - English; USER GUIDE

1-3 W300 NAVMAN English USER GUIDE W300 – English W 3 0 0

Page 4 - Navman’s GPS Sport.Tool 300 series provides an affordable and; Welcome

1-4 W300 NAVMAN Navman’s GPS Sport.Tool 300 series provides an affordable and reliable way to track and store a variety of personal performance indicators. Please read this guide carefully and familiarize yourself with the interface and functions, as well as the intended use and limitations of the N...

Page 5 - Content; General information; Care and maintenance; Normal operation

1-5 W300 NAVMAN Content W300 – Content 1.0 General information 1-6 1.1 Checklist 1-6 1.2 Care and maintenance 1-6 1.3 Water resistance 1-6 1.4 Changing the battery 1-7 2.0 Navman W300 interface 1-8 2.1 Button functions 1-8 2.2 Display screen 1-8 3.0 Getting started 1-9 3.1 Be outdoors 1-9 3.2 Fit th...

Page 6 - CAUTION: Please ensure battery cover is in place during; W300 – General information

1-6 W300 NAVMAN 1.0 General information 1.1 Checklist The W300 package should contain the following items: • Navman W300 GPS Sport.Tool • armband • quick guide • user guide • 1 x AA battery • registration card 1.2 Care and maintenance Do not attempt to disassemble the W300; there are no user service...

Page 7 - Changing the battery; Always shut down the W300 before changing the battery.; Note: All system settings, and the calculated data that was stored; If battery power becomes low during operation the battery icon; For best performance:; constant = low power; to perform a controlled shutdown.; battery icon; Turn D-ring anti-clockwise and slide enclosure cover down to

1-7 W300 NAVMAN 1.4 Changing the battery Always shut down the W300 before changing the battery. Note: All system settings, and the calculated data that was stored at the last controlled shutdown*, are retained when the battery is removed. This information persists indeﬁnitely until updated or reset....

Page 8 - There are two control buttons,; Note: where it is required to press and HOLD buttons, a countdown; Mode Icons; Cal

1-8 W300 NAVMAN 2.1 Button functions There are two control buttons, and . These buttons are pressed separately or together to turn the unit on and off, cycle through modes, and select mode options. Throughout this guide the button icons are used as follows: = press this button = press this button = ...

Page 9 - to turn the power on and enter setup, OR; W300 – Getting started; Always enter setup first if you wish to change settings.

1-9 W300 NAVMAN 3.1 Be outdoors The W300 is not intended for operation indoors or under water as it uses Global Positioning System (GPS) satellites to get time and date information, and to calculate distance and speed. For best results, always use the W300 outdoors with an unobstructed view of the s...

Page 10 - To enter setup; Press and hold; restart the W300. For details about changing settings see Section; To leave setup; Note: you must leave setup first if you want to turn the power off.; To start normal operation

1-10 W300 NAVMAN 3.3.1 Enter setup To enter setup Press and hold to turn the power on and enter setup. When the counter reaches zero, the W300 will enter setup. If you release before the counter reaches zero the W300 will immediately start normal operation. Note: To enter setup after starting normal...

Page 11 - This value will be used to calculate calories burned.; Set offset

1-11 W300 NAVMAN 4.1 Setting options Press and hold to turn the power on and enter setup. Press repeatedly to step through the setting options. Setting options are accessed in the order shown below. See subsequent sections for details about editing settings. Set (12hr) lets you set 12hr or 24hr time...

Page 12 - Set 12hr or 24hr time display format.; To access this option; If necessary, press and hold

1-12 W300 NAVMAN 4.1.1 Set time format Set 12hr or 24hr time display format. To access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set time format 1) Press to start editing (time format option ﬂashes). 2)...

Page 13 - Set beep ON or beep OFF. When beep is ON, an audible ‘beep’; Access this option

1-13 W300 NAVMAN W300 – Setup 4.1.3 Set button beep status Set beep ON or beep OFF. When beep is ON, an audible ‘beep’ will sound when buttons are pressed. Access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. ...

Page 14 - Edit the user weight value (used for calculating calories burned).

1-14 W300 NAVMAN 4.1.5 Edit user weight Edit the user weight value (used for calculating calories burned). Access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To edit user weight 1) Press to start editing (we...

Page 15 - to turn the power on and enter; To set speed units; ) Press to go to the next option, or hold to leave setup.; distance is displayed in ‘km’.; speed units

1-15 W300 NAVMAN 4.1.7 Set speed units Set units for speed (km/h or mph). Access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set speed units 1) Press to start editing (speed units ﬂash). 2) Press or to se...

Page 16 - This option lets you adjust the W300 to display local time*. You; GPS data are received.

1-16 W300 NAVMAN 4.1.8 Set offset (set local time) This option lets you adjust the W300 to display local time*. You only need to do this once, unless operating the unit in a new time zone. (* By default the W300 displays GPS time. The W300 will perform all functions accurately without adjusting the ...

Page 17 - settings; beep

1-17 W300 NAVMAN 4.1.9 Editing settings (overview) W300 – Setup settings editing details KEY = press this button = press this button = press both buttons together edit accept beep beep beep ON beep OFF set units (km/h) set units (mph) set units (km/h) set offset set 12hr set 31-12 set 24hr set 12-31...

Page 18 - Press; W300 – Normal operation

1-18 W300 NAVMAN 5.1 Modes Press to turn the power on start normal operation. Press repeatedly to step through the modes (press and hold to cycle through the modes quickly). Modes are accessed in the order shown below. See subsequent sections for details about using different modes. Speed shows dist...

Page 19 - This mode lets you monitor session distance, current speed and; To access this mode; While in Speed mode

1-19 W300 NAVMAN 5.1.1 Speed mode This mode lets you monitor session distance, current speed and pace. To access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Speed mode • Press and hold to clear all*...

Page 20 - This mode lets you monitor total distance.; While in Odometer mode; Note: The W300 displays distance in units corresponding to speed; Access this mode

1-20 W300 NAVMAN 5.1.3 Odometer mode This mode lets you monitor total distance. Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Odometer mode • Press and hold to clear odometer only. • Press to g...

Page 21 - Clock mode shows the current time and date.; While in Clock mode; Note: If GPS signals are not yet obtained a ‘no GPS’ alert is

1-21 W300 NAVMAN 5.1.5 Clock mode Clock mode shows the current time and date. (Time is only displayed while GPS satellite signals are available. By default, GPS time is displayed. See section 4.1.8 for instructions on setting local time.) Access this mode If necessary, press to turn the power on and...

Page 22 - Timer mode lets you monitor session time.; to turn the power on and start normal; While in Timer mode; • Press and hold; stops whenever you stop moving.; session time

1-22 W300 NAVMAN 5.1.6 Timer mode Timer mode lets you monitor session time. Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Timer mode • Press and hold to clear all* session data. (*Does not clea...

Page 23 - clear all session data*

1-23 W300 NAVMAN 5.1.7 Mode operation (overview) W300 – Normal operation modes operating details Speed (AVG) Odometer Speed Timer Calories clear all session data* Clock clear odometer only clear calories only clear all session data* (*Does not clear odometer.) � � � � AVG Cal � � clear all session d...

Page 24 - To restore all default factory settings; ) make sure the unit is off; Restoring default settings; W300 – Default settings; WARNING: Restoring factory default settings clears

1-24 W300 NAVMAN To restore all default factory settings 1) make sure the unit is off 2) press and hold to turn the unit on – DO NOT RELEASE 3) while holding , press ﬁve times When restoring default settings The screen displays the message ‘reset all’ and a counter. If you stop any time down to 1 on...

Page 25 - Pace

1-25 W300 NAVMAN Global Positioning System (GPS) A satellite tracking system. Pace The current pace value shows how long it would take to run one distance unit (1 km or 1 mile) at your current speed. The distance unit depends on the speed units currently being used. For example, if you are using spe...

Page 26 - W300 – Warnings and disclaimers

1-26 W300 NAVMAN It is the user’s sole responsibility to set-up and use the Navman GPS Sport.Tool (the Product) in a manner that will not cause accidents, personal injury or property damage to you or others. Entering information or handling the Product while moving is unsafe and may cause you to be ...