Navman iCN 600series - Manual

5 iCN 600 series | User Manual Back Components Component Description 1 Speaker Outputs voice commands and warnings. Use Volume button to adjust. 2 Memory Card Slot Slot for memory card. Insert card with label facing the front of the iCN. 3 GPS Receiver Receives signals from GPS satellites when lifte...

6 iCN 600 series | User Manual 3. Memory Card iCN 635 Your iCN may come with an optional memory card containing a preactivated map. To navigate to your destination you will first need to insert the memory card into your iCN. Important: If your iCN did not come with a memory card, you will first need ...

7 iCN 600 series | User Manual 4. Turning your iCN On and Off Turn iCN On 1. Plug the power adapter into the socket on the left of the iCN and the other end into the vehicle lighter socket.2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal pos...

8 iCN 600 series | User Manual 5. Position in a Vehicle Before you begin, check if your vehicle is fitted with a heat reflecting or heated windshield. If so, you will need to purchase an external antenna for your iCN to receive GPS signals.There are a number of ways to position an iCN in a vehicle. Fo...

9 iCN 600 series | User Manual Option Two: Adhesive Tape and Screw Mount* You can use the base plate, adhesive tape and screws supplied to mount the iCN directly into the vehicle dashboard. Important: This is a permanent solution — the adhesive tape cannot be removed once fixed and the screws will l...

11 iCN 600 series | User Manual 8. GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. This screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a North-pointing compass, the headi...

12 iCN 600 series | User Manual 9. Setting your Destination Before you travel, you must specify a destination. To a Street Address 1. From the Main Menu , select the Destination option. 2. From the Destination screen, select the Address option. The Destination-Address screen will display. 3. Select ...

13 iCN 600 series | User Manual 5. To select a Postcode or ZIP Code press OK . Select a postcode or ZIP code. Press OK . 6. To select a City/Town press OK . Select a city or town. Press OK . 7. To select the first intersecting street, press OK . A list of intersecting streets will display. Select a s...

14 iCN 600 series | User Manual To a Point-Of-Interest (POI) A POI is a named site, feature, landmark or public venue. POI's are stored in Categories , such as parks and museums. POI's can be displayed as icons on a map. 1. From the Main Menu , select the Destination option.The Destination screen wi...

15 iCN 600 series | User Manual • Show — Displays the address on the Map screen • Go — Calculates the route and displays it on the Map or 3D Map screen. Multiple Destination Points with the Trip Planner You can use the Trip Planner to set multiple destination points for your trip. Your route will be...

16 iCN 600 series | User Manual Using the Map screen to Plan a Route You can plan a route directly from the Map screen using the Popup menu. 1. From the Main Menu , select the Map option. The Map screen will display. • Move round the Map screen using the 8-way toggle • Zoom using + and - on the Zoom...

17 iCN 600 series | User Manual 10. Avoiding an Area* You can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be active at any one time. Avoid Areas are displayed as shaded areas. If no alternative route exists, you will be routed through an Avoid Area. * iCN 635,...

18 iCN 600 series | User Manual 11. Viewing Your Route Once a route has been calculated, there are a number of ways to view it. Cycle through the screens by pressing the Page button. To cancel a route or stop the Route Demonstrator, return to the Main Menu , select the Route Information option, then...

19 iCN 600 series | User Manual Next Turn Screen Displays the turn direction, street name and the distance to the next turn. A route must have been calculated for this screen to display. Access to this screen is set on the Settings - Display screen. 1. From the Main Menu , select the Map option The ...

20 iCN 600 series | User Manual Route Information The Route Information screen provides information about your current route, and lets you skip a trip destination point or cancel a route. The screen is only available from the Main Menu when you are navigating a route. Show Route Select to display yo...

22 iCN 600 series | User Manual 13. Route Demonstrator The Route Demonstrator allows you to: • Preview a route, or• Plan and view a route without a GPS fix, such as when you are inside a building. Step 1. Activate Route Demonstrator 1. From the Main Menu , select the Settings option. 2. From the Sett...

23 iCN 600 series | User Manual 14. Favorites & Shortcuts You can save up to 200* destinations as Favorites, 10 of which can be Shortcuts. *50 Favorites for iCN 610, 620 Saving Favorites and Shortcuts 1. From the Main Menu , select the Destination option. 2. From the Destination screen, select t...

24 iCN 600 series | User Manual Editing Favorites and Shortcuts Edit the name of the Favorite or Shortcut, or save a Favorite as a Shortcut. 1. From the Main Menu screen, select the Favorites option. • If you have saved a Shortcut, the Shortcuts screen will display. To edit a Favorite, press the Pag...

25 iCN 600 series | User Manual 15. Settings You can modify the following settings to suit your preferences. Screen Brightness 1. Press and hold the Zoom/Brightness button to display the brightness indicator bar. 2. Press + or - on the Zoom/Brightness button to adjust the brightness. The iCN can hea...

26 iCN 600 series | User Manual • Press and hold the ESC button to clear the text box if required. • Enter a name for the log file.• Select Enter and press OK . The Data Logging Enabled screen will display. • Select Yes and press OK . The Routing screen will display. 15. Press ESC repeatedly until th...

27 iCN 600 series | User Manual Internal Map Settings 1. From the Main Menu , select the Settings option. 2. From the Settings screen, select the Maps option. 3. From the Settings - Maps screen, select the Internal Maps option. The Maps (Internal) screen will display. 4. To activate a map, use the 8...

28 iCN 600 series | User Manual • Press the Page button to view additional files. 5. Press ESC repeatedly until the Map screen displays. • If you have made changes to the settings, press OK to accept the Warning dialog box. Active Points Of Interest (POIs) Settings Active POIs are custom POIs that ar...

29 iCN 600 series | User Manual 6. Press ESC repeatedly until the Map screen displays. • If you have made changes to the settings, press OK to accept the Warning dialog box. Clear Data Settings 1. From the Main Menu , select the Settings option. 2. From the Settings screen, select the My Data option...

30 iCN 600 series | User Manual 16. Smart  Desktop Smart  Desktop is used to download maps to your iCn, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps. Note: For Windows XP, install XP Service Pack 1 from Microsoft before you install Smart  Desktop. Install ...

31 iCN 600 series | User Manual 17. Updating your iCN Updating from Previous Version of Smart  If a software update is available for your iCN, you will be prompted when you open Smart  Desktop: 1. Open Smart  Desktop: Start > Programs > Navman > Smart  Desktop 2. Follow the prompts to u...

32 iCN 600 series | User Manual 18. Installing Maps Using Smart  Desktop Your iCN comes with a pre-activated map. If you require an additional map, you must first purchase a Map Product Key from your Navman supplier. Use Smart  Desktop to activate your Map Product Key and install the required map. ...

33 iCN 600 series | User Manual 19. Continuous Continental Navigation* You can seamlessly navigate between installed maps without the need for installing all maps en route. This is achieved by using a Basemap. A Basemap is a map of a large area, such as West Europe or United States and Canada , cont...

34 iCN 600 series | User Manual Remove Basemap 1. Connect the iCN to your computer. • Connect the iCN to mains power supply using the adapter provided.• Connect the USB cable to the iCN and to your computer USB port.• Turn on the iCN by pressing the Menu/Power button. The iCN USB Connection screen w...

35 iCN 600 series | User Manual 20. Smart  Desktop Advanced Features Find a City or Town To search for a City or Town to verify the map to be installed: 1. From the Map menu, click Find City . The Find City window will open. 2. Type the name of the City or Town in the City Name field. The list of av...

37 iCN 600 series | User Manual Backups You can save backups of your settings, Shortcuts and Favorites to your computer. To Back up your Settings, Shortcuts and Favorites 1. From the File menu, click Backup . The Backup window will display. 2. Click New Backup . The New Backup window will display. 3...

38 iCN 600 series | User Manual 21. Accessories The following accessories are available for your iCN: External Antenna Required for vehicles with heated windshields, and to boost GPS performance in weak signal areas. Memory Card Writer Connects to your computer and allows you to download maps to SD ...

39 iCN 600 series | User Manual Software Product License NAVMAN (THE LICENSOR) IS WILLING TO LICENSE THE iCN Smart  SOFTWARE (THE SOFTWARE) TO YOU (THE CUSTOMER) ONLY IF YOU ACCEPT ALL THE TERMS OF THIS LICENCE. PLEASE READ THE TERMS CAREFULLY, BECAUSE USING THIS SOFTWARE WILL BE DEEMED TO BE YOUR ...

40 iCN 600 series | User Manual © 2004 Navman NZ Limited. Navman is a registered trademark of Navman NZ Limited. All rights reserved. Microsoft ® Windows ® 98, ME, 2000 or XP, Microsoft ® Internet Explorer are registered trademarks of Microsoft Corporation Smart  T M , Drive-Away T M and Back-On-Tr...