Navman F10 - Manuals

F10 5 Select Map 3/3............................................................................................................................ 49 Map POIs ........................................................................................................................................ 50 Vol...

F10 6 Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as ...

F10 7 Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Components Component Description Battery Indicator Indicates the level of battery charge: ƒ Green - battery full ƒ Orange - battery charging. Turns the Navman on or off. For more informat...

F10 8 How do I get started? Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a...

F10 9 3. Turn your Navman on Press and hold to turn your Navman on. Your Navman will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. ƒ To prevent the Select Language screen from displaying on each start-up, clea...

F10 10 How do I adjust the volume? The volume on your Navman can be adjusted by the volume control on the Volume preference screen. To mute the volume from the map screens, tap and then tap . To adjust the volume, tap and hold to display the Volume preference screen. For more information on how to a...

F10 11 How do I turn my Navman off? To turn your Navman off, press and hold . Power-saving standby mode To enter standby mode, press . To end standby mode, press again. When your Navman enters standby mode, the screen will turn off. When you turn your Navman on again, it will display the screen you ...

F10 12 What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination. The Main Menu can be accessed from the map screens by tapping or by tapping the status bar at the bottom of any screen. Map screens There are four map screens us...

F10 13 How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of sig...

F10 14 How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... know the address of your destinatio...

F10 15 How do I search for an address? Enter a destination using the Destination Search , Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for...

F10 16 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap . The Select a country screen will display. b) Select United Ki...

F10 17 Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keybo...

F10 18 b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results...

F10 19 How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by...

F10 23 How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map. The Map Menu will display. 2. Tap Route , then Skip Waypoint . The next waypoint will be skipped and the route recalculated to the following waypoint.

F10 24 How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview ...

F10 25 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap . The Select a country screen will display. b) Select United Ki...

F10 26 b) Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result. The Preview screen will display. c) Complete one of the following: If you want to ... Then ... navigate to your selected destination tap . Your route is calculated and displayed ...

F10 27 How do I save Favourites and My Home? You can save up to 200 destinations as favourites, one of which can be saved as My Home. You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens. For more information, see "How ...

F10 28 How do I navigate to a Favourite? 1. Tap the Favourite destination you want to travel to. The Preview screen will display. 2. Tap . Your Navman will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as ...

F10 29 How do I edit the name of a Favourite? 1. From the Favourite Destinations screen, select a favourite to edit. The Favourite Preview screen will display. 2. Tap Edit . The Edit Name screen will display. 3. To edit the name of the favourite, tap . 4. After you have edited the favourite name, ta...

F10 30 How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. 1. Tap a recent location. The Preview screen will display. 2. Complete one of the following: If you wan...

F10 31 How do I view my route? When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions. The Map button cycles through the 3D Map, 2D Map, Route Overview and Turn-by-Turn screens. 3D Map screen The 3D Map screen disp...

F10 33 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see “Ma...

F10 35 Route Overview screen The Route Overview screen gives you a bird’s eye view of your trip. Note: A route must first have been calculated for this screen to be available. ƒ Tap and drag the screen, to move across the map. ƒ Tap the map to view the Map Menu (see "How do I use the Map Menu?&#...

F10 39 How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens. Displaying the Map Menu 1. Tap to display the 3D Map or 2D Map screen. 2. Tap and drag to move around the map to your selected location. 3. Tap the map. The Map Menu will di...

F10 40 How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will...

F10 41 How do I preview a route? Route demonstration allows you to: ƒ Preview a route. ƒ Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. To always preview your route, see "Data Recording 4/4" on page...

F10 42 What can I customize? There are various customization options available to enhance your navigation experience. The Preferences menu screens are accessed by pressing ƒ To move forward through the Preferences screens, tap . ƒ To revisit the previous screen, tap .

F10 43 Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... Then... change the route type move the Route Type slider towards Fastest time to give high priority to the fastest...

F10 47 Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... Then... change the map colour scheme select your preferred scheme from the Map Scheme box. set the screen contrast to auto...

F10 50 Map POIs Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable ot...

F10 52 Screen Complete the following: If you want to... Then... change the screen brightness move the Screen Brightness slider towards Bright to increase screen brightness. move the Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Navman can heat up when the Brightne...

F10 53 POI Alerts The Alert preferences allow you to set warning chimes and visual warnings for custom POI that will notify you when you are within a chosen distance-radius of your location. For example, a warning chime will sound or a visual warning will display when a place in an active category i...

F10 54 GPS GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed, the heading in degrees and a north-...

F10 55 Setting your GPS mode Complete the following: If you want to... Then... use GPS select the Normal option. use WAAS select the WAAS (only available in USA) option. use EGNOS select the EGNOS (only available in Europe) option. Note: WAAS - Wide Area Augmentation System is a navigation system de...

F10 56 Language Complete the following: If you want to... Then... enable voice guidance select the Enable voice guidance check box. change the on-screen language select your preferred language from the Language box and tap OK . Your language preference is saved and the map screen is displayed. chang...

F10 57 Power The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 10. Complete the following: If you want to... ...

F10 58 Keyboard Complete the following: If you want to... Then... use an alphabetic keyboard for entering information select the Use alphabetic type (a, b, c...) option. use a QWERTY keyboard for entering information select the Use QWERTY type option. use a keypad-type keyboard (predictive text) whe...

F10 59 Units You can change the units used by your Navman by customizing the measurements preferences. Units 1/2 Complete the following: If you want to... Then... change the time format select either the 12 hour or 24 hour option change the distance units 1 select your preferred distance unit type f...

F10 62 Saved Info Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations . delete favourites tap Delete Favourite Destinations . delete avoid areas tap Delete Avoid Areas . restore factory default settings tap Restore Factory Defaults . Note: The Restor...

F10 63 Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: ƒ To prevent the Tutorial from displaying again on startup, clear the Show on start-up check box to clear it. ƒ To move fo...

F10 64 About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... Then... enable a shop demonstration of SmartST to be played tap Shop Demo on the preference screen. After a 10 second delay, the route demonstration will navigate between yo...

F10 65 What is NavDesk? NavDesk and Map DVDs are sold separately NavDesk is a suite of tools you can use to access greater functionality and product information via your computer. NavDesk (sold separately) allows you to: ƒ obtain software updates ƒ manage maps ƒ manage custom POIs ƒ manage safety ca...

F10 66 How do I install NavDesk onto my computer? Note: Before you begin: Ensure that your computer meets the minimum system requirements for NavDesk, especially: i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install NavDesk, even if it is not your default bro...

F10 67 NavDesk features Tip: After NavDesk has been installed on your computer, you can access it from the Windows Start menu: Start All Programs Navman NavDesk Element Description Menu bar Menus that provide access to basic NavDesk functionality. Navman online Displays the Navman website. My Maps A...

F10 68 How do I keep NavDesk up-to-date? We recommend that you regularly use NavDesk to check the Navman server for NavDesk software updates. Note: Updating software is different from upgrading software: When you update NavDesk, the latest service packs and bug fixes are downloaded from the Navman s...

F10 69 My Maps The My Map application allows you to install new maps, remove maps from your device and purchase new maps. Start All Programs Navman NavDesk My Maps Element Description Zoom In Click to zoom in. Continent A drop down list of continents that have maps available for your Navman. Map Sou...

F10 70 How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. You can install maps from the DVDs (sold separately) to a memory card or your Navman internal memory; however you may need to purchase a Map Product Key to activate the maps. Which map should I instal...

F10 71 ƒ Your computer will connect to the Internet and activate your Map Product Key. ƒ When activation has completed, the map will change colour to amber; continue to step 7. 7. Click the map you want to install to your Navman. The map will change colour to green to indicate it has been selected. ...

F10 73 What is a Major Road Network map? Continuous continental navigation Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Major Road Network map covers a large area, such as Western Europe, and contains ma...

F10 74 NavAlbum Depending on your Navman model, certain NavAlbum features may not be functional. NavAlbum is a NavDesk application which allows you to copy, delete or move pictures or albums between the NavPix library on your Navman and the NavPix library on your computer. You can upload them to www...

F10 75 Toolbar The following options are available on the toolbar: Button Description Create new album Click to create a new album in the NavPix library you are viewing. Rotate left Rotates the selected NavPix 90° to the left. Rotate right Rotates the selected NavPix 90° to the right. Transfer to yo...

F10 76 How do I use NavAlbum? How can I view and edit pictures or albums on my computer? Complete one of the following: If you want to ... Then ... rotate a picture to left ƒ select the picture from the Album display area. ƒ click Rotate left on the toolbar. rotate a picture to right ƒ select the pi...

F10 77 If you want to ... Then ... export to Google Earth™ (only NavPix with GPS coordinates can be exported to Google Earth) ƒ in the Desktop albums section, select the album containing the picture you want to export to Google Earth. ƒ select the NavPix , right click and then select Export to Googl...

F10 78 Image Search Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to NavAlbum. You can then upload the photo to either the NavPix or Flickr websites, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix ...

F10 79 My subscriptions Safety camera information is only available for selected countries. Your Navman contains pre-loaded safety camera information. To subscribe to current Navman safety camera information, use the DVD (sold separately) to install NavDesk software on your computer. For the latest ...

F10 81 Voice Transfer The Voice Transfer application is part of NavDesk and allows you to install or remove voice files. Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Navman if requir...

F10 82 PIN Security PIN Security is a feature which allows you to set a PIN on your Navman. The PIN will disable your Navman in the event of theft. To set a PIN you must first register your Navman with the Navman server. How do I register my Navman and set a PIN? Tools PIN Security The PIN registrat...

F10 83 What if I forget the PIN for my Navman? Tools PIN Security 1. In the User Name and Password fields, enter the username and password that you entered when registering online. 2. In the PIN field, enter a new PIN you want to assign to your Navman. Note : Your PIN must be between three and eight...

F10 84 How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: ƒ Favourites and My Home ƒ Preferences, including Point of Interest and NavPix preferences ƒ Multi-stop trips ƒ Recent locations. How do I Backup my Navman? Tools Backup Restor...

F10 85 Reference How do I insert a Memory Card? Hold the card by the edges and gently insert it into the slot with the label facing the front of the Navman. CAUTION Do not to apply pressure to the centre of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the...

F10 86 Point of Interest categories Icon Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Centre Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Chu...

F10 87 Icon Description Icon Description Railway Station Rent-a car Parking Rest Area Restaurant Area Scenic or Panoramic View School Shop Shopping Centre Stadium Swimming Pool Tennis Court Theatre Tourist Information Office Travel Agency Vehicle Equipment Provider Veterinarian Water Sports Winery Y...

F10 88 © 2007 MiTAC International Corporation. Navman is a registered trademark of MiTAC International Corporation and is used under licence by Navman Technology NZ Ltd. All rights reserved. The software contains proprietary information of Navman; it is provided under a licence agreement containing ...

F10 89 For more information User Manual The User Manual can be downloaded from the Navman website: www.navman.com/manuals Online support For 24/7 help and support with Navman products, visit our Technical Support website at: support.navman.com You will find a fully searchable Frequently Asked Questi...