Navman SmartS iCN530 - Manuals

5 iCN 530 | User Manual G et tin g s ta rte d Thank you for purchasing your Navman iCN 530. We hope you enjoy your new GPS transferable navigation system.This user manual will help you Drive-Away™ with your iCN, straight out of the box.Navman welcomes your feedback. To contact us or visit our websit...

7 iCN 530 | User Manual G et tin g s ta rte d 1. Introduction Whether you travel in your own country or elsewhere, your iCN will direct you to your destination without the need for map-books and second-hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, a...

1 2 3 4 8 7 6 5 8 iCN 530 | User Manual G et tin g st ar te d Component Description 1 Touch Screen Displays maps and menu options.Tap with the stylus to select menu options or enter information. 2 Charge Indicator Amber indicates that the battery is charging; Green indicates that the battery is full...

12 3 1 2 3 4 9 iCN 530 | User Manual G et tin g s ta rte d Bottom Components Component Description 1 Reset Resets the iCN; press using the stylus. 2 Hot Shoe Plate Connection plate for the P1 or T1 mount. 3 Battery Switch Must be set to ON ( | )for normal use. Switching to OFF (O) will turn the batt...

1 2 12 10 iCN 530 | User Manual G et tin g st ar te d Back Components Component Description 1 External Antenna Socket Connection socket for GPS mMCX External Antenna (not included). Protected by rubber cover. 2 Speaker Outputs voice commands and warnings. Use the Volume control to adjust. Top Compon...

11 iCN 530 | User Manual G et tin g s ta rte d Stylus The stylus is your input device. Pull the stylus out of the slot and extend it for ease of use. Store it in the slot when not in use. • Tap the screen with the stylus to select.• Tap and drag the screen with the stylus to navigate the 2D Map and ...

12 iCN 530 | User Manual G et tin g st ar te d 3. Starting your iCN Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you will need to purchase an external antenna for your iCN to receive GPS signals. Step One: Position the iCN in your Vehicle Follow...

13 iCN 530 | User Manual G et tin g s ta rte d Step Four: Warning Screen 1. Read the warning message.2. To confirm that you have read and understood the message, tap Accept The first Tutorial screen will display. Step Five: Tutorial Screens 1. Read the Tutorial screen. • To prevent the Tutorial from d...

14 iCN 530 | User Manual G et tin g st ar te d To Turn your iCN Off When your iCN is off, it enters a suspended state and the system stops operating. When you turn your iCN on, it returns to the screen you were last viewing. 1. Remove the iCN from the suction-mount bracket, if necessary. 2. Press  ...

15 iCN 530 | User Manual G et tin g s ta rte d 4. Setting your Destination For your safety, enter destination information before you start a journey. Do not operate the iCN while driving. Select a destination using the Destination , Keyboard and Preview screens, which used together form a destinatio...

16 iCN 530 | User Manual G et tin g st ar te d Figure 3. Number/Symbol Keyboard As you select each character, the first two results will display. Tap to see more search results. • To select a character or a search result, tap the character or search result.• To delete a character, press ESC or tap &l...

17 iCN 530 | User Manual G et tin g s ta rte d Address Search Rules The following rules apply when searching for a destination in Europe: Street names with dates or numbers If a street name contains a date or a number, search by the first number:Example 1: If searching for “ Faubourg du 13 Juillet 19...

18 iCN 530 | User Manual G et tin g st ar te d Setting your Destination by Address Step One: Open the Destination screen a. From the Main Menu , tap Go To . b. From the Go To screen, tap Address or POI . The Destination screen will display. Important Note: The first time you are setting your destina...

19 iCN 530 | User Manual G et tin g s ta rte d Step Four: Find the Street of Destination a. From the Destination screen, tap Find street . The Keyboard screen will display. b. Use the Keyboard screen to find the street of your destination. For information on using the Keyboard screen, see pages 15-16...

20 iCN 530 | User Manual G et tin g st ar te d Step Five: Find the House Number of Destination a. From the Destination screen, tap Enter house number . The Keyboard screen will display. Note: If the Enter house number option is not displayed, house numbers are not available for your selected street....

21 iCN 530 | User Manual G et tin g s ta rte d Setting your Destination by POI A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as parks and museums. Step One: Open the Destination screen a. From the Main Menu , tap...

23 iCN 530 | User Manual G et tin g s ta rte d 5. Using the 2D Map screen to Plan a Route You can plan a route directly from the 2D Map screen using the Pop-up menu. 1. From the Main Menu , tap Map . The 2D Map screen will display. • Move around the 2D Map screen using the stylus. 5. Select Navigate...

24 iCN 530 | User Manual 6. Multi-stop Trips You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be calculated to go via each of these points in the specified order.Destination points can be added via the Multi-stop Trip screen or by selecting Show...

25 iCN 530 | User Manual Step Two: Select the Country of your Destination Point a. If the destination point is in a different country to the previous destination point, tap Change country . The Select country screen will display. b. Select a country from the list. The Destination screen will display...

26 iCN 530 | User Manual Step Four: Find the Street of your Destination Point a. From the Destination screen, tap Find street . The Keyboard screen will display. b. Use the Keyboard screen to find the street of your destination point. For information on using the Keyboard screen, see pages 15-16. The...

27 iCN 530 | User Manual Step Five: Find the House Number of your Destination Point a. From the Destination screen, tap Enter house number . The Keyboard screen will display. Note: If the Enter house number option is not displayed, house numbers are not available for your selected street. Select Go ...

28 iCN 530 | User Manual d. Complete one of the following: Note: Destination points added, updated or deleted after a multi-stop trip has commenced will not affect the current route. If you want to ... Then ... add another destination point Note: Destination points added after a multi-stop trip has ...

29 iCN 530 | User Manual 7. Viewing your Route Once a route has been calculated, you can view it in several ways. Press to cycle through the screens. 2D Map Screen The 2D Map screen is always oriented North and shows your current position (if a GPS fix is active) and surrounding street names. If a ro...

30 iCN 530 | User Manual 3D Map Screen The 3D Map screen displays when a route is calculated, oriented to the travelling direction with an adjustable horizon.It is not possible to plan a route directly from this screen.To view the 3D Map screen when a route has been calculated, press to cycle throug...

31 iCN 530 | User Manual Next Turn Screen The Next Turn screen displays information that you need for the next turn, the direction of the turn and the distance to the turn. A route must have been calculated for this screen to be able to display. Access to this screen is controlled by the Display pre...

34 iCN 530 | User Manual 9. Avoiding an Area You can calculate a route that avoids a specified area on the map. For example, you may want to avoid an area that frequently experiences traffic problems. Up to ten Avoid Areas can be added. Avoid Areas are displayed as shaded areas. If no alternative rout...

35 iCN 530 | User Manual 10. Route Demonstrator The Route Demonstrator allows you to: • Preview a route.• Plan and view a route without a GPS fix, such as when you are inside a building. Step One: Activate Route Demonstrator 1. From the Main Menu screen, tap Preferences . 2. From the Preferences scre...

36 iCN 530 | User Manual To Disable Route Demonstrator 1. Press to display the Main Menu screen. 2. From the Main Menu screen, tap Preferences . 3. From the Preferences screen, tap Routing . The Routing screen will display. 4. Press twice. 5. Clear the Demonstrate Route check box. 6. Tap Save . The ...

37 iCN 530 | User Manual 11. Favourites and My Home You can save up to 200 destinations as Favourites, one of which can be saved as My Home. My Home can be any designated Favourite, but we recommend that it is your home or other common destination. You can save a Favourite from the Preview screen af...

38 iCN 530 | User Manual 4. Complete one of the following: • To save as My Home, tap Save as My Home . The Favourite is saved as My Home. The Go To screen will display. • To save as a favourite, tap Save as Favourite . The Favourite is saved. The Go To screen will display. Saving a Favourite from th...

39 iCN 530 | User Manual 6. To change the name of the Favourite, select the Name box. The Enter text screen will display. • To select a character, tap the character.• To delete a character, press ESC or tap << ; hold ESC to delete the line. • To display the number/symbol Enter text screen, tap...

40 iCN 530 | User Manual 4. Tap the Name box. The Enter text screen will display. • To select a character, tap the character.• To delete a character, press ESC or tap << ; hold ESC to delete the line. • To display the number/symbol Enter text screen, tap 123 . • To display the alternate Enter ...

41 iCN 530 | User Manual Navigating to a Favourite 1. From the Main Menu , tap Go To . 2. From the Go To screen, tap Favourites . The Favourite screen will display. 3. Select a Favourite. The Preview Favourite screen will display. 4. Tap Go . The route is calculated and displayed on the 3D Map scree...

42 iCN 530 | User Manual 12. Preferences You can modify the following preferences to suit your needs. Volume 1. Rotate the Volume Control up or down to hear a sound test. 2. Rotate the Volume Control up or down and hold to display the volume bar. • Rotate the Volume Control up or down to adjust the ...

44 iCN 530 | User Manual Map Preferences — Display Settings 1. From the Main Menu , tap Preferences . 2. From the Preferences screen, tap Maps . 3. From the Maps screen, tap Display . The first of two Display screens will display. Press to move through the Display screens. 4. Complete the following: ...

45 iCN 530 | User Manual If you want to... Then... display topographical information on the 2D Map and 3D Map screens select the Topographic display check box. display grid lines on the 2D Map and 3D Map screens select the Display Map Grid check box. display a north-pointing compass on the 2D Map an...

46 iCN 530 | User Manual Alerts Preferences — Active POIs The Active POI settings allow you to set warning chimes and visual warnings for custom POIs that will activate within a chosen radius of your location. For example, a warning chime will sound or a visual warning will display when an active PO...

47 iCN 530 | User Manual Alerts Preferences - Speed and GPS Signals The Safety settings allow you to set safety-related warnings. 1. From the Preferences menu, tap Safety Alerts . The Safety Alerts screen will display. 2. On the Safety Alerts screen, tap Safety . The Safety screen will display. 3. C...

48 iCN 530 | User Manual My Data Preferences - My Points of Interest (My POI) Custom Points of Interest (POIs) are installed from the Smart  Desktop POI Editor (see pages 61- 63), and listed on the My POIs screen. 1. From the Main Menu , tap Preferences . 2. From the Preferences screen, tap My Data...

49 iCN 530 | User Manual GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The Satellite Signal Strengths screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a north-pointing co...

50 iCN 530 | User Manual Measurement Preferences 1. From the Main Menu screen, tap Preferences . The Preferences screen will display. 2. From the Preferences screen, tap More Preferences . The second Preferences screen will display. 3. On the second Preferences screen, select Measurements . The Meas...

51 iCN 530 | User Manual Hardware Preferences - Screen 1. From the Main Menu screen, tap Preferences . The Preferences screen will display. 2. From the Preferences screen, tap More Preferences . The second Preferences screen will display. 3. On the second Preferences screen, tap Hardware . The Hardw...

52 iCN 530 | User Manual Hardware Preferences - Volume 1. From the Main Menu screen, tap Preferences . The Preferences screen will display. 2. From the Preferences screen, tap More Preferences . The second Preferences screen will display. 3. On the second Preferences screen, tap Hardware . The Hardw...

53 iCN 530 | User Manual Hardware Preferences - Power Status 1. From the Main Menu screen, tap Preferences . The Preferences screen will display. 2. From the Preferences screen, tap More Preferences . The second Preferences screen will display. 3. On the second Preferences screen, tap Hardware . The...

54 iCN 530 | User Manual 5. Complete the following: If you want to... Then... change the time to elapse before entering suspended state when connected to an external power source i select the Go to Power Saving Mode if not used for check box under External Power . ii select the time to elapse when c...

55 iCN 530 | User Manual 13. Smart  Desktop Smart  Desktop is used to install maps to your iCN, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps. Microsoft ® ActiveSync ® Microsoft ActiveSync is used to establish a connection between your iCN and your computer....

56 iCN 530 | User Manual 5. If prompted to connect your iCN to your computer, complete the following: • Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into the USB Socket on the side of your iCN. Tip: Where possible, plug the USB cab...

57 iCN 530 | User Manual 14. Updating your iCN Updating your Version of Smart  We recommended that you regularly use Smart  Desktop to check the Navman website for Smart  software updates: 1. If you connect to the Internet via a dial-up connection, connect to the Internet now.2. Open Smart  Desk...

58 iCN 530 | User Manual 15. Installing Maps Using Smart  Desktop Installing and Activating Maps on your iCN 1. Open Smart  Desktop, if it is not already open: Start  Programs  Navman  Smart  for iCN530 2. Insert a Smart  Map CD into your computer CD drive, the available maps will display (th...

59 iCN 530 | User Manual 5. Click the map to install to your iCN. The map will change colour to indicate it has been selected (the default colour for selected The selected map is displayed in dark green. maps is dark green ). The map is now listed in the Selected section of the Desktop Selected Maps...

60 iCN 530 | User Manual 16. Smart  Desktop Advanced Features This section details advanced features of Smart  Desktop. If you have not installed Smart  Desktop, see pages 55-56. To Find a City or Town 1. From the Map menu, click Find City . The Find City window will open. 2. Type the name of the...

61 iCN 530 | User Manual Map Layers To conserve space on your iCN and memory card, you can choose map layers to install.The layers you can choose from are: • Points of Interest (POIs)• Bodies of water and parks• Land contours (topography). To access the Map Layers section: Desktop tab  Settings  L...

62 iCN 530 | User Manual 2. Add a POI to the POI File. • On the POI Editor window Edit menu, click New . The POI Details window will open. • Type a description for the POI in the Description box. • On the Degrees, Minutes, Seconds tab, type or select the degree, minute and second of the POI latitude...

63 iCN 530 | User Manual 3. Modify the POI settings as required: If you want to... Then... activate the POI select the Active check box. Note: If you do not activate the POI, you will be able to configure only the POI Visibility Level and Icon File settings. enable a visual warning when the POI is i...

64 iCN 530 | User Manual Backups You can save backups of all iCN Preferences and Favourites to your computer. To Back up your Preferences, Favourites and My Home 1. On the Smart  Desktop File menu, click Backup . The Backup window will display. 2. Click New Backup . The New Backup window will displ...

65 iCN 530 | User Manual Appendix: Street Types Note: Belgium and Switzerland each list street types and their abbreviations in three languages. Country Street Type Abbreviation Austria BOULEVARD CHAUSSEE PLATZ STRASSE BVD CH PL STR Belgium (Dutch) BAAN BERG DREEF LAAN MARKT PARK PLEIN SQUARE STEENW...

68 iCN 530 | User Manual Support Information Support for Australia: Navman Australia Pty. Ltd PO Box 479 Gladesville, NSW 2111 Australia Support: http://support.navman.com Website: http://www.navman.com Support for New Zealand: Navman New Zealand PO Box. 68-155 Newton Auckland New ZealandSupport: ht...