Navman 5380 - Manuals

TRACKER 5380 Installation and Operation Manual 6 NAVMAN It is the owner’s sole responsibility to install and use the instrument in a manner that will not cause accidents, personal injur y or property damage. The user of this product is solely responsible for observing safe boating practices. Global ...

TRACKER 5380 Installation and Operation Manual 7 NAVMAN 1-2 Cleaning and maintenance The TRACKER screen is covered by a proprietar y anti-reflection coating. To avoid damage, clean the screen only with a damp cloth and mild detergent when dirty or covered in sea salt. Avoid abrasive cleaners, petrol...

TRACKER 5380 Installation and Operation Manual 8 NAVMAN 1-4 Removing and replacing the display unit If the display unit is bracket mounted then the display unit can easily be removed and replaced for security or protection. Removing the display unit: 1 Turn the display unit of f (see section 2-3) an...

TRACKER 5380 Installation and Operation Manual 9 NAVMAN 2 Basic Operation Overview of the keys Go back to an earlier menu or display. Any changes made are ignored. In chart mode, centres chart at boat ’s position. Show a menu of the main displays. To go to a display, select it from the menu (see sec...

TRACKER 5380 Installation and Operation Manual 11 NAVMAN 2-4 Backlight and night mode To go to the Backlight display, press briefly. When you have finished, press . Backlight The display and keys are backlit. To change the backlight level, select Backlight , then press to dim or to brighten. Tip: Pr...

TRACKER 5380 Installation and Operation Manual 12 NAVMAN 2-7 Simulate mode In Simulate mode, the TRACKER ignores data from the GPS antenna and other transducers and sensors and the TRACKER generates this data itself. Otherwise, the TRACKER functions normally. There are two simulate modes: Nor m al: ...

TRACKER 5380 Installation and Operation Manual 13 NAVMAN Other menu and displays Note: Press to go from an Other display back to your last chart display.

TRACKER 5380 Installation and Operation Manual 14 NAVMAN 2-8-1 Dual displays The TRACKER can show two displays at once, for example Chart + Gauges. One of the displays, called the active display, has a yellow border and is controlled by the user. To change the active display, press twice (Highway ca...

TRACKER 5380 Installation and Operation Manual 16 NAVMAN A waypoint is a position that you can set on the TRACKER chart, for example a fishing spot or a point on a route (see section 5). Going to a waypoint from the chart display 1 Go to the chart display. 2 Move the cursor to the waypoint: either u...

TRACKER 5380 Installation and Operation Manual 18 NAVMAN A typical chart display shows: 3-2 Chart display To go to the Chart display, press , select Chart , then select Chart. A Data header. To turn the data of f or on or to change what data is displayed, see section 2-8-2 B Compass (see section 2-8...

TRACKER 5380 Installation and Operation Manual 19 NAVMAN The chart scale is displayed at the top left of the chart: 3-2-2 Latitude and longitude Latitude and longitude can be displayed in the data header. The display is degrees and minutes to three decimal places, about 2 m (6 ft) resolution. Normal...

TRACKER 5380 Installation and Operation Manual 20 NAVMAN 3-3 Distance and bearing calculator The distance and bearing calculator can plot a course of one or several legs and show the bearing and length of each leg, as well as the total distance along the course. The completed course can be converted...

TRACKER 5380 Installation and Operation Manual 21 NAVMAN Tracking records the boat ’s position to memor y at regular intervals, which can be: Time intervals. Or distance intervals. The track of where the boat has been can be displayed on the chart. The TRACKER can display one track while recording a...

TRACKER 5380 Installation and Operation Manual 22 NAVMAN 4 Navigation: Highway display The highway display has a bird’s eye view of the boat ’s course to a destination. To go to the Highway display, press , select Other, then select Highway. The highway display shows: A Optional data header (see sec...

TRACKER 5380 Installation and Operation Manual 23 NAVMAN 5-1 Waypoints display To go to the waypoints display, press , select Other, then select Way points. The waypoints display is a list of the waypoints that have been entered, each with waypoint symbol, name, latitude and longitude, distance and ...

TRACKER 5380 Installation and Operation Manual 24 NAVMAN 5-2-3 Editing a waypoint Editing a waypoint from the chart display 1 In the chart display, move the cursor to the waypoint to edit. 2 Press and select Edit. 3 Change the waypoint data (see section 5-2-7). Select Save. Editing a waypoint from t...

TRACKER 5380 Installation and Operation Manual 27 NAVMAN 4 To insert a waypoint in the route: i Select where the waypoint will be: To insert the first waypoint in a new route, select Leg 1. To insert a waypoint at the end of the route, select the unused leg at the end of the list of waypoints. Other...

TRACKER 5380 Installation and Operation Manual 28 NAVMAN GPS worldwide navigation The US Government operates the GPS system. Twent y-four satellites orbit the ear th and broadcast position and time signals. The positions of these satellites are constantly changing. The GPS receiver analyses the sign...

TRACKER 5380 Installation and Operation Manual 29 NAVMAN The satellite display has information about the GPS satellites and GPS position. To go to the satellite display, press , select Other, then select Satellite. The satellite display shows: 7-1 Satellite display A C D B E G F A Status of GPS ante...

TRACKER 5380 Installation and Operation Manual 30 NAVMAN 8 Gauges display The Gauges display shows boat data, such as water speed, as analog or digital gauges. To go to the Gauge display, press and select Chart , then select Chart+ Gauges. If necessar y, press twice to switch to the Gauges display (...

TRACKER 5380 Installation and Operation Manual 31 NAVMAN 9 Data display The data display has large numeric data fields. To go to the data display, press , select Other, then select Data. To select what data is displayed: 1 Press and select Data setup. 2 Change a data field: i Press the cursor keys t...

TRACKER 5380 Installation and Operation Manual 32 NAVMAN 10-2 Fuel display Fuel display without engine RPM Fuel display with engine RPM To go to the Fuel display, press , select Other, then select Fuel. The display is dif ferent if engine RPM is available (requires SmartCraft to be installed): The F...

TRACKER 5380 Installation and Operation Manual 33 NAVMAN 6 The TRACKER then asks you to set the throttle to achieve a target RPM. For a twin engine boat set both engines to about the target RPM. When the engine RPMs are correct, the Target RPM box will turn green. Now, do not change the engine speed...

TRACKER 5380 Installation and Operation Manual 34 NAVMAN 10-3-2 Managing fuel consumption curves Record several curves for dif ferent conditions. Renaming a curve 1 Press one or more times until the Setup menu is displayed, then select Fuel. 2 Select Fuel consu mption cur ve. Select Na me , press an...

TRACKER 5380 Installation and Operation Manual 35 NAVMAN A C B I H J K D E G D F N L M 11 Tides display The tides display is available on C-MAP charts. The tides display shows tide information at a tide station for the selected date. Note: The tides display requires the local time of fset to be set ...

TRACKER 5380 Installation and Operation Manual 36 NAVMAN 12 User card display A C-MAP™ user card is an optional plug-in card that can store data files (see section 1- 4). There are three types of files: waypoints, routes or a track. To go to the user card display, press , select Other, then select U...

TRACKER 5380 Installation and Operation Manual 37 NAVMAN 13 About display To show the about display, press , select Other, then select A bout. The about display shows: The software version and date. The world chart version. Any card fitted. The number of waypoints, routes and tracks in the TRACKER. ...

TRACKER 5380 Installation and Operation Manual 38 NAVMAN Press once or more until the Setup menu is displayed, then select Syste m : Language Select the language for the displays. The options are: English, Italian, French, German, Spanish, Dutch, Swedish, Portuguese, Finnish and Greek. Tip: In case ...

TRACKER 5380 Installation and Operation Manual 39 NAVMAN SmartCraft (see the SmartCraft Gateway Installation and Operation Manual ) Setup option menus Factor y default settings are shown. The setup data available will depend on the optional sensors and instruments installed. System (see 14-1) Chart ...

TRACKER 5380 Installation and Operation Manual 40 NAVMAN Rotation The options for chart rotation are: North up: North is always at the top of the chart display. Track up: The chart is rotated so that the boat direction is to the top of the display. This option is useful for navigating narrow harbour...

TRACKER 5380 Installation and Operation Manual 41 NAVMAN Setting map datum 1 In the Chart setup menu, select Map datu m. 2 Select the map datum for the paper chart you are using. 3 If you select a datum other than WGS 84 the TRACKER asks if you want to apply the NMEA datum of fset (see below). Warni...

General submenu Plotter mode Normal: only scales available on the chart card can be displayed. If you press or to select a chart scale which is not available, on the chart card, the chart display will change to this scale but will only display the boat position and track (if enabled). The rest of th...

TRACKER 5380 Installation and Operation Manual 43 NAVMAN Press once or more until the Setup menu is displayed, then select GPS: GPS Source • Internal: Use the internal GPS antenna (TRACKER 5380i) or the external GPS antenna supplied (TRACKER 5380) (see section 15-5). • NM EA: Use an external GPS or ...

TRACKER 5380 Installation and Operation Manual 46 NAVMAN 14-6 Setup > Logs Press one or more times until the Setup menu is displayed, then select Logs: The values can be changed independently of each other. These log values are saved when the unit is turned of f. Reset trip dist This resets the t...

TRACKER 5380 Installation and Operation Manual 49 NAVMAN • C-MAP™ NT-MAX, NT+ or NT chart cards. • C-MAP™ user cards (3 V) for storing data. (The older 5 volt cards are not supported) • NAVMAN carr y bag. • NAVMAN NavBus junction boxes simplif y wiring, particularly if several instruments are connec...

TRACKER 5380 Installation and Operation Manual 50 NAVMAN Optional sensors and instruments External alarms : Lights or sounders in the boat to sound alarms through the boat (see section 15- 4). GPS or DGPS antenna : For GPS navigation, see section 15-5. Fuel sensors : For fuel functions. The TRACKER ...

TRACKER 5380 Installation and Operation Manual 51 NAVMAN 2 Bracket Mounting Requires a panel for mounting the bracket. Ensure that the panel is not likely to deform and is not subject to excessive vibration. The bracket can be tilted and rotated. The display unit can be removed when it is not in use...

TRACKER 5380 Installation and Operation Manual 52 NAVMAN Power/data cable Red Yellow Black External beepers or lights Main switch 12 V DC] Fuse 2A The power/data cable has a black locking collar and flying leads. 1 Wire the TRACKER for auto power to have the TRACKER turn on with the boat ’s ignition...

TRACKER 5380 Installation and Operation Manual 53 NAVMAN Selecting an antenna Fit one of these GPS antennas: • Normally use the internal GPS antenna (TRACKER5380i) or the GPS antenna supplied (TRACKER 5380). • An optional dif ferential beacon DGPS antenna to give enhanced accuracy within range of la...

TRACKER 5380 Installation and Operation Manual 54 NAVMAN Black Power/data cable Orange Blue NavBus wires to other Navbus instruments If the boat has one or two SmartCraft capable Mercur y petrol/gasoline engines, connect the TRACKER to the SmartCraft engines with an optional SmartCraft gateway. The ...

TRACKER 5380 Installation and Operation Manual 55 NAVMAN During setup to send NMEA data to other instruments, set NM EA out to and specif y the NM EA data to send (see section 14-9) . Setup and test 1 Put a blanking cap on any unused connector on the back of the display unit. Ensure all connectors a...

TRACKER 5380 Installation and Operation Manual 56 NAVMAN GENERAL Size : 126 mm H x 126 mm W x 65 mm D (5.0” x 5.0” x 2.6”) Display : 3.8” diagonal, TFT colour, 240 x 320 pixels Backlight : Display and keys Supply voltage 10 to 16 V DC. Supply current : at 13.8 V 120 mA min - no backlighting 220 mA m...

TRACKER 5380 Installation and Operation Manual 57 NAVMAN PP PP PP PP PP PP List of datums Adindan Afgooye AIN EL ABD 1970 American Samoa 1962 Anna 1 Astro 1965 Antigua Island Astro 1943 ARC 1950 ARC 1960 Ascension Island 1958 Astro Beacon ‘E’ 1945 Astro DOS 71/4 Astro Station 1952 Astro Tern Island ...

TRACKER 5380 Installation and Operation Manual 58 NAVMAN 1-1 The TRACKER won’t turn on: a The TRACKER is designed to operate on a 12 volt batter y system, where the voltage may var y from 10 to 16 volts. If an excessive voltage is supplied, a fuse will be tripped, turning the display unit of f. Chec...

TRACKER 5380 Installation and Operation Manual 59 NAVMAN 2-1 No GPS fix or long time to get fix at startup: a May occur occasionally if the antenna does not have a clear view of the sky. The satellite positions are constantly changing. b Antenna cable not connected to display unit. c Restart the GPS...

TRACKER 5380 Installation and Operation Manual 60 NAVMAN Note : For the TRACKER to measure fuel consumption, the optional fuel flow kit must be fitted. 3-1 Fuel used or remaining seem inaccurate: TRACKER is not wired for auto power (see section 15- 4). b In rough seas, fuel may surge back and forth ...

TRACKER 5380 Installation and Operation Manual 61 NAVMAN Attention Area - An important area on a chart, such as a restricted anchorage or a shallow area (see section 14-2). B a t h y m e t r i c l i n e - A depth contour line on the chart. Chart card - A plug-in card that stores chart data for a reg...

TRACKER 5380 Installation and Operation Manual 62 NAVMAN Navigation data The boat is sailing from the start to the destination and has moved of f the plotted course from the start to the destination. BRG Bearing to Destination: Bearing to the destination from the boat. BRG Bearing to cursor: Bearing...

TRACKER 5380 Installation and Operation Manual 63 NAVMAN How to contact us www.navman.com NORTH AMERICA BNT - Marine Electronics30 Sudbury Rd, Acton, MA 01720.Toll Free: +1 866 628 6261Fax: +1 978 897 8264e-mail: [email protected]: www.navman.com OCEANIAAustralia Navman Australia Pty. LimitedSu...

Lon 174° 44.535’E Lat 36° 48.404’S Made in New ZealandMN000436B Tr a ck e r 5 3 8 0