Napoleon GDI30 - Manuals

Napoleon GDI30 – Manual in PDF format online.

Manuals:

Manual

Manual Napoleon GDI30

Summary

Page 2 - TABLE OF CONTENTS

2 W415-0806 / 06.28.09 TABLE OF CONTENTS 1.0 INTRODUCTION 3 1.1 WARRANTY 4 1.2 DIMENSIONS 5 1.3 INSTALLATION OVERVIEW 5 1.4 GENERAL INSTRUCTIONS 6 1.5 GENERAL INFORMATION 7 1.6 CARE OF GLASS 7 2.0 INSTALLATION 8 2.1 INSERT LEVELLING 8 2.2 CHIMNEY CONNECTION 8 2.3 GAS INSTALLATION 10 2.4 OPTIONAL WAL...

Page 3 - WARNING

3 W415-0806 / 06.28.09 3.1 ! WARNING • Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fi re or injury. • Risk of fi re or asphyxiation do not operate appliance with fi xed glass removed. •...

Page 4 - Quality Assurance Certifi cate.; NAPOLEON® GAS FIREPLACE PRESIDENT’S LIFETIME LIMITED WARRANTY

4 W415-0806 / 06.28.09 NAPOLEON® warrants its products against manufacturing defects to the original purchaser only. Registering your warranty is not necessary. Simply provide your proof of purchase along with the model and serial number to make a warranty claim. NAPOLEON® reserves the right to have...

Page 5 - Rating Plate Location; OVERVIEW

5 W415-0806 / 06.28.09 1.2 DIMENSIONS 27 1 / 4 " 19 5 / 8 " 17 7 / 8 " 18 3 / 4 " 30 1 / 16 " 11 1 / 8 " 5 1 / 4 " 1 3 / 8 " 23 1 / 8 " 21 3 / 4 " 3" ø collars 13 3 / 4 " 13 3 / 4 " Rating Plate Location 1.3 INSTALLATION OVERVIEW Venting, see “INST...

Page 6 - INSTRUCTIONS; to; Specialists

6 W415-0806 / 06.28.09 1.4 GENERAL INSTRUCTIONS ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RAN OUT, WITH THE GLASS DOOR OPENED OR REMOVED. PROVIDE ADEQUATE ACCESSIBILITY CLEARANCE FOR SERVICING AND OPERATING THE APPLIANCE. PROVIDE ADEQUATE VENTILATION. NEVER OBSTRUCT ...

Page 7 - INFORMATION

7 W415-0806 / 06.28.09 64.5% GDI-30 1.5 GENERAL INFORMATION FOR YOUR SATISFACTION, THIS APPLIANCE HAS BEEN TEST-FIRED TO ASSURE ITS OPERATION AND QUALITY! MINIMUM INLET: Gas supply pressure is 4.5 inches water column for natural gas and 11 inches water column for propane. MAXIMUM INLET: Gas pressure...

Page 8 - Ensure that existing chimney cleanouts fi t properly.; LEVELLING

8 W415-0806 / 06.28.09 2.0 INSTALLATION ! WARNING RISK OF FIRE, MAINTAIN SPECIFIED AIR SPACE CLEARANCES TO VENT PIPE AND APPLIANCE. Clean out ashes from the inside of the wood-burning appliance. Make sure that the chimney and wood-burning appliance are in a clean and sound condition and constructed ...

Page 10 - INSTALLATION; AS SPARKS OR OPEN FLAMES.; Move the appliance into position and secure.; OPTIONAL WALL SWITCH; WIRE SIZE; gauge

10 W415-0806 / 06.28.09 2.3 GAS INSTALLATION ! WARNING RISK OF FIRE, EXPLOSION OR ASPHYXIATION. ENSURE THERE ARE NO IGNITION SOURCES SUCH AS SPARKS OR OPEN FLAMES. SUPPORT GAS CONTROL WHEN ATTACHING GAS SUPPLY PIPE TO PREVENT DAMAGING GAS LINE. ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF...

Page 11 - MINIMUM MANTEL CLEARANCES; HEAT RESISTANT TO PREVENT DISCOLOURATION.

11 W415-0806 / 06.28.09 3.0 FRAMING Combustible mantel clearance can vary according to the mantel depth. Use the graph to help evaluate the clearance needed. These same requirements apply to any combustibles protruding on either side of the appli-ance. 3.1 MINIMUM MANTEL CLEARANCES ! WARNING RISK OF...

Page 12 - DOOR REMOVAL AND INSTALLATION; DOOR LATCH; DOOR GLASS REPLACEMENT; GLASS; DO NOT USE SUBSTITUTE MATERIALS.

12 W415-0806 / 06.28.09 4.0 FINISHING The upper louvres must be removed to allow the door to be opened or closed. To access the lower door latch, open the valve control door. Release the top and bottom door latches, located at the right side of the door. NOTE: The protective wrap on plated parts is ...

Page 13 - PLACEMENT; PHAZER; pigments burn in during the heat activated curing process.; THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.

13 W415-0806 / 06.28.09 4.4 LOG PLACEMENT PHAZER TM logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.Log colours may vary. During t...

Page 14 - LOGO; OPTIONAL CHARCOAL EMBERS; The ember material will only glow when exposed to direct fl ame how-; logs available

14 W415-0806 / 06.28.09 4.4.3 Position the front right log just behind the grate lining up the holes in the bottom with the studs located on the log support. 4.4.4 Move the left log into position lining up the hole in the bottom with the stud on the left side of the log support. 4.4.5 Line up the sq...

Page 15 - OPTIONAL BLOWER INSTALLATION; FIGURE 8

15 W415-0806 / 06.28.09 5.0 OPTIONAL BLOWER INSTALLATION FIGURE 8 FRONT BLOWER ACCESS COVER THERMODISC / BRACKET ASSEMBLY REAR BLOWER ACCESS COVER 5.0.1 Turn off the electrical power and the gas supply to the appli-ance insert. 5.0.2 Open the glass door and remove the logs and fi bre bricks, if inst...

Page 16 - FOR YOUR SAFETY READ BEFORE LIGHTING:; WHAT TO DO IF YOU SMELL GAS:

16 W415-0806 / 06.28.09 6.0 OPERATION IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RUN OUT WITH THE GLASS DOOR OPENED OR REMOVED. ! ...

Page 17 - PILOT BURNER ADJUSTMENT; ADJUSTMENT; NG

17 W415-0806 / 06.28.09 7.0 ADJUSTMENTS 7.1 PILOT BURNER ADJUSTMENT Adjust the pilot screw to provide properly sized fl ame. Turn in a clockwise direction to reduce the gas fl ow. Inlet pressure can be checked by turning screw (A) counter-clockwise until loosened and then placing pressure gauge tubi...

Page 18 - FLAME MUST; CHARACTERISTICS; H I; FLAME ADJUSTMENT KNOB

18 W415-0806 / 06.28.09 8.0 MAINTENANCE CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. This fi replace and its venting system should be inspected before use and at least annua...

Page 19 - COMPONENTS

19 W415-0806 / 06.28.09 Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your Authorized dealer / distributor. FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF THE ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR...

Page 20 - TERMINAL KITS; VENT KITS

20 W415-0806 / 06.28.09 7 6** 19 5 25 1 4 13 15 14 11 12 10 24 2 3 18 16 1 TERMINAL KITS REF NO. APPLIANCE DESCRIPTION 25* GDI-226 TERMINAL VENT KITS REF NO. APPLIANCE DESCRIPTION 1-2" & 1-3" DOUBLE PLY ALUMINUM LINER-INLET AND EXHAUST & 2-3" TO 2" REDUCER: 26* GDI-2320KT VEN...

Page 21 - ACCESSORIES

21 W415-0806 / 06.28.09 ACCESSORIES REF NO. APPLIANCE DESCRIPTION 1 GI-1LK BLACK UPPER & LOWER LOUVRES 1 GI-1LPB BLACK UPPER & POLISHED BRASS LOWER LOUVRES 1 GI-1LAB BLACK UPPER & ANTIQUE BRASS LOWER LOUVRES 1 GI-1LSS BLACK UPPER & BRUSHED STAINLESS STEEL LOWER LOUVRES 1 GI-OIG GOLD ...

Page 23 - SHOOTING; WITH THE GLASS DOOR OPEN OR REMOVED.; SYMPTOM

23 W415-0806 / 06.28.09 10.0 TROUBLE SHOOTING ! WARNING ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RAN OUT, WITH THE GLASS DOOR OPEN OR REMOVED. SYMPTOM PROBLEM TEST SOLUTION Main burner goes out; pilot stays on. Pilot fl ame is not large enough or not engulfi ng the ...

Page 25 - HISTORY; ppliance Ser; This heater must be serviced annually depending on usage.

25 W415-0806 / 06.28.09 11.0 SERVICE HISTORY A ppliance Ser vice Histor y This heater must be serviced annually depending on usage. Date S ervice T e chnician Name Service Performed S pecial Concerns Dealer Name 43.1