Mitsubishi Electric FD630U - Manuals

Mitsubishi Electric FD630U – Manual in PDF format online.

Manuals:

Manual Mitsubishi Electric FD630U

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10

Summary

Page 2 - Control command configuration; Code unique to each control operation.

2 2. Control command configuration The command consists of the address code, function code, data code, ACK/NAK, and end code. The length of the com-mand varies among the functions. [Address code] Fixed to 00. (‘30h’ ‘30h’ in the ASCII code) [Function code] Code unique to each control operation. [Dat...

Page 6 - Use the following commands to obtain other information.

6 Use the following commands to obtain other information. The PC sends the command without attaching the data code to it. On the other hand, the projector attaches tothe received command its current operating status as the data code and send it back to the PC. [Example] When checking the currently s...

Page 7 - How to set the value; Use the character or ASCII code as shown below to set the value.; Function commands

7 [Example] When displaying the MENU selection bar. (Values enclosed in quotation marks are ASCII codes.): 4.4 Direct commands (Not executable in stand-by mode. Possible only to read during muting.) The direct commands are used to numerically adjust the volume and keystone.When the computer sends th...

Mitsubishi Electric Manuals