Mitsubishi Electric XL6500U - Manual

Page 2 - Preparation before using the network function

EN-2 Preparation/SetUp Preparation before using the network function This projector is equipped with the network function to control and monitor the projector’s operations using a Web browser and to send e-mail notifi cation. Before using the network function, perform the following three preparation...

Page 3 - When the following window appears, click Next.; Installation

EN-3 1 Copy three fi les (DI_4.1.3.4.msi, Setup.Exe, and Setup.Ini) contained in the Tools folder of CD-ROM to the hard disk of your personal computer. 2 Double-click the fi le named Setup.Exe. 3 When the following window appears, click Next. Installation Before starting installation, be sure to rea...

Page 4 - Select a folder to install the program, and click Next.; How to remove Projector-Control Device Installer

EN-4 Preparation/SetUp (continued) 4 Select a folder to install the program, and click Next. 5 Click Next. 6 Installation starts. • T h e p r o g r e s s o f t h e i n s t a l l a t i o n p r o c e s s i s displayed as shown on the right. 7 When the installation process is completed, click Close. Ho...

Page 5 - The Assign IP Address screen appears.; Setting the IP address of the projector

EN-5 1 Start the Projector-Control Device Installer.• S e l e c t [ S t a r t ] - [ A l l P r o g r a m s ] - [ P r o j e c t o r ] - [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. • Projector is recognized. (Note)When projector isn’t recognized, check...

Page 6 - When using a DHCP server

EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. • Check that the options are marked with check-marks as shown on the right. Keep them un-changed for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address. When using a DHCP serve...

Page 7 - When not using a DHCP server

EN-7 5 Select [Assign a specifi c IP address] and click Next. 6 Enter a fi xed IP address (for example, 192.168.0.1) and click Next. (Note)D o n o t u s e 0 o r 2 5 5 f o r t h e l a s t d i g i t o f t h e I P address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP addres...

Page 8 - Telnet setting

EN-8 1 Start the Projector-Control Device Installer. • S e l e c t [ S t a r t ] - [ A l l P r o g r a m s ] - [ P r o j e c t o r ] - [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structure until the IP address you set ...

Page 9 - Enter “0” and press the Enter key.

EN-9 1 Enter “0” and press the Enter key. 2 Input the old (current) password and press the Enter key. (Default password is admin.) • If you input a wrong password, an error message appears and the setting menu is displayed again. In this case, set the password again. • If you forget your password, s...

Page 10 - Setting the display language of ProjectorView (language)

EN-10 1 Enter “3” and press the Enter key. 2 To enable the e-mail notifi cation function of Projector-View, enter 1 and press the Enter key. (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Controlled Mode) Preparation/SetUp (continued) 1 Enter “1” a...

Page 11 - Enter “9” and press the Enter key.; Save and exit; Enter “5” and press the Enter key.; Setting the PJLinkTM certifi cation (PJLink certifi cation Mode)

EN-11 1 Enter “9” and press the Enter key. 2 The setting screen is shaded and the setting is updated. • It takes about 10 seconds for the setting to be updated. Don’t perform communication during this period. Save and exit • Because the password, display language, LAN control, and PJLink ™ certifi c...

Page 12 - ProjectorView; Using the ProjectorView; How to start up

EN-12 1 Start the Projector-Control Device Installer.• S e l e c t [ S t a r t ] - [ A l l P r o g r a m s ] - [ P r o j e c t o r ] - [Projector-Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structure on the left pane until the IP address you set appears. 3 Select the W...

Page 13 - The default password is admin.

EN-13 5 T h e p a s s w o r d i n p u t s c r e e n a p p e a r s . E n t e r t h e password you set. • The default password is admin. (Note)I f y o u i n p u t a w ro n g p a s s w o rd t h re e s u c c e s s i v e times, the Web browser is closed. In this case, repeat from step 1. 6 The ProjectorV...

Page 14 - Example of notifi cation: Alert on lamp life end

EN-14 ProjectorView (continued) VIRTUAL REMOTE controller Put a checkmark in the box of the Virtual remote enabled on the ProjectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual o...

Page 15 - Initial setting

EN-15 Initial setting To load information on the projector such as model name and lamp operating time, set the projector data in advance. Click the SETUP button on the ProjectorView main screen. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) ...

Page 16 - Support for the PJLinkTM function

EN-16 Support for the PJLink™ function This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using the same application among projectors of different models and different manufacturers. To use this function, set the PJLink™ cer...

Page 17 - Support for the PJLinkTM function (continued)

EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during control using the network function may cause ProjectorView to fail to display data correctly. • The operating time and temperature may not be displayed correctly. In this case, close the browser, recognize this projector usi...

Mitsubishi Electric XL6500U - Manual

Table of Contents:

Summary

Other Mitsubishi Electric Models