Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; WARNING; This apparatus must be grounded.; CAUTION
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto al...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 5 - COMPLIANCE NOTICE OF FCC
EN – 5 ENGLISH WARNING: Unplug immediately if there is somethingwrong with your projector. Do not operate if smoke, strange noise or odor comes outof your projector. It might cause fire or electric shock. Inthis case, unplug immediately and contact your dealer. Never remove the cabinet. This project...
Page 6 - Overview; Control area; • The + and - buttons are used in the KEYSTONE and
EN – 6 Overview 14 6 5 3 13 1 7 2 10 4 11 12 8 9 LAMP VOLUME ZOOM/ FOCUS KEYSTONE TEMP SOURCE MUTE AUTO POSITION LENS SHIFT MENU ENTER POWER 2 4 5 6 7 8 9 10 11 12 13 17 14 1 18 15 16 3 REMOTE IN REMOTE OUT INPUT 1 INPUT 2 R/P R B/P B G/Y H/H V V AUDIO IN AUDIO OUT Y C RS-232C RS-232C/MOUSE USB S-VI...
Page 7 - Bottom side; About the laser beam
EN – 7 ENGLISH Bottom side 1 2 3 1 Adjustment foot (Left/Right) 2 Air inlet grille/Filter cover 3 Lamp cover Caution: Do not replace the lamp immediately after using theprojector because the lamp has got extremely hot. COMPUTER VIDEO KEYSTONE VOLUME LASER EXPAND MENU R-CLICK ENTER P in P STILL MUTE ...
Page 8 - Battery installation; Operation area (for wireless control system); Using the wired remote control; • When the remote control is connected; Using the remote control
EN – 8 Battery installation Use two AA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring si...
Page 9 - Installation; Orientation of the projector; Front projection; Front projection, ceiling mount
EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection Front projection, ceiling mount For ceiling mount, you need the ceiling mount kit.Ask a specialist for installation. For more details,consu...
Page 10 - Basic connections; power plugs, not by pulling the power cords.; Projector + AV device; Projector + DVD player or HDTV decoder; Some DVD players have an output connector for 3-line fitting (Y, C
EN – 10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personalcomputer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection.• Plug in the projector...
Page 11 - For using the COMPUTER/COMPONENT VIDEO INPUT 1 (BNC) terminals; projector. Contact your dealer for further information.; For Macintosh; your dealer for further information.; About DDC; switch first, and then boot up the computer.
EN – 11 ENGLISH For using the COMPUTER/COMPONENT VIDEO INPUT 2 (Mini D-SUB 15P) terminals REMOTE IN REMOTE OUT INPUT 1 INPUT 2 R/P R B/P B G/Y H/H V V AUDIO IN AUDIO OUT Y C RS-232C RS-232C/MOUSE USB S-VIDEO VIDEO 2 VIDEO 1 L AUDIO R MAIN AC IN To COMPUTER IN (Mini D-SUB 15P) To COMPUTER OUTPUT When...
Page 12 - Preparing the projector for operation; Getting ready for projection
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Attach the provided power cord to the projector.2. Plug the power cord in the wall outlet.3. Remove the lens cap. Warning: • Do not look into the lens directly when the projec- tor is “ON.” • The len...
Page 13 - To operate projector power ON
EN – 13 ENGLISH To operate projector power ON 4. Press the ZOOM/FOCUS button to FOCUS. “FO- CUS” will appear on the display. 5. Adjust with the + or - button to get a fine picture. 6. Select the desired external input source by using the COMPUTER 1,2 or VIDEO1,2 button on the re-mote control or the ...
Page 14 - Turning off the projector; AUTO POSITION button
EN – 14 VOLUME 15 To operate projector power ON (Continue) Turning off the projector Use the following procedure to turn off the power.Don’t turn off the power by switching off the mainpower switch or disconnecting the power plug be-cause these methods may cause deteriorationin the lamp’s performanc...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu.EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INSTALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. Pr...
Page 18 - Picture adjustment; Color matrix
EN – 18 User memory for signal setting This projector can memorize the maximum of 2 signalmenu settings. Memorizing the setting 1. Select MEMORIZE in the SIGNAL menu, and press the ENTER button. 2. Press the $ or % button to select the memory which you wish to record (USER 1 or USER 2). 3. Press the...
Page 19 - Color temperature
EN – 19 ENGLISH CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 Color temperature 1. Select COLOR TEMP in IMAGE menu. 2. Press the $ or % button to select USER . 3. Press the ENTER button. 4. Press the { or } button to select the desired item. 5. Press the $ or % button to a...
Page 20 - Advanced features for presentation; Expand; Setting the Expand mode; Still; Using the Expand mode
EN – 20 Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can magnify the detailed image of the picture.You can also view the screen displaying the picture asits original size (native resolution display). Setting the Expand mode 1. Press the MENU but...
Page 21 - Mouse remote control; Projector + computer with USB connector; Operation; nal which the projector recognizes first will work.; Projector + computer with SERIAL port; mouse pointer
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB or SERIAL port, you can operate your computer with theprojector remote control. Projector + computer with USB connector Operation • Turn off computer and the projector before connecting with SERIAL port. When con...
Page 22 - How to reset the operation time meter; Interval of the lamp replacement; and cannot; Lamp replacement
EN – 22 The lamp is designed to project the image on theLCD panels. When the lamp no longer functions,replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector, you may get burned because of thehigh temperature of the lamp. • When you replace the lamp, press ...
Page 23 - Maintenance; Cleaning the air-filter
EN – 23 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug thepower cord from the wall outlet before you performany maintenance on the projector. Cleaning the air-filter Clean the air-filter frequently (about once a month).If the filter or ventilation slots become clogged with...
Page 24 - Procedure for changing batteries; How to check battery level
EN – 24 About the terminal cover (with Anti-Theft Alarm device) This projector includes a terminal cover with Anti-Theft Alarm device. Once the terminal cover isinstalled, its Anti-Theft Alarm device will detectvibration caused by the projector being moved andemit an alarm.• Mitsubishi assumes no re...
Page 25 - Troubleshooting; CAUSE
EN – 25 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE POSSIBLE SOLUTIONS PROBLEMS Only the motion area in theimage supplied from the com-puter is not displayed. • The...
Page 26 - Indicators; Normal condition; POWER LAMP; Unusual temperature
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector.The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. TEMP indicator LAMP indicator POWER indicator LAMP TEMP POWER No...
Page 27 - Specifications; Video compatibility; Kensington Lock
EN – 27 ENGLISH Specifications LCD projector XL5980U|XL5980LU AC100 - 240V, 50 / 60Hz 3.8 A 16770000 colors F 1.8 - 2.1* 1 f = 51 - 64 mm* 1 270 W 60 - 300 inch* 1 (aspect ratio 4:3) Resolution : 640 x 400 (Expand) - 1024 x 768 (Real) - 1600 x 1200 (Compress) Sync on Green available NTSC / NTSC 4.43...
Page 30 - Specification of the attached lens (for XL5980LU)
EN – 30 L L I W W H Height Width • The above numbers are approximate, and may be slightly different from the actual measurements. inch 486090 120150180 cm 163203305406508610 inch 80 100150200250300 inch 6480 120160200240 m 5.67.0 10.614.217.821.4 m 8.4 10.515.921.326.732.1 inch 220276418560701843 in...
Page 32 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION
MITSUBISHI Projector Contact Information Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Av...
