Milan Technology MIL-SM800P - Manuals

5 LED Indicators Figure 2-4. LED Indicators There are three LED-Indicators (100M, LNK/ACT, FDX/COL) for eachRJ-45 port. The following table provides descriptions of the LEDstatuses and meaning. They provide a real-time indication of systemsoperation status. LED Status Color Description Power On Gree...

6 Rear Panel The Console port and 3-pronged power plug are located at the RearPanel of the MIL-SM801P, MIL-SM801G and MIL-SM800P switches asshown in Figure 2-5. The switches will work with AC in the range 100-240V AC, 50-60Hz. Figure 2-5. The Rear Panel of the switch Console Port: Console management...

7 Attaching Rubber Feet A. Make sure the mounting surface on the bottom of the switch is grease and dust free. B. Remove adhesive backing from the rubber feet.C. Apply the rubber feet to each corner on the bottom of the switch. These footpads can protect the switch from shock and vibration. Figure 2...

8 3.Network Application Desktop Application The switch can be used as a standalone switch connecting personalcomputers, servers, or print servers directly connecting to form smallworkgroups. Figure 3-1. Desktop Application

9 Segment Application For enterprise networks where large data broadcasts are constantlyprocessed, this switch is suitable for individual department users toconnect to the corporate backbone. Figure 3-2. Fiber port on MIL-SM801P switch extends the distancebetween workgroups

10 4.Network Configuration Connecting a Terminal or PC to the Console Port Console management involves the administration of the switch via adirect connection to the RS-232 console port. This port is a female DB-9 connector. From the main menu of the console program, the user hasaccess to manage the...

11 After the connection between switch and PC is finished, turn on the PCand run a terminal emulation program or HyperTerminal to match the following default characteristics of the console port: Baud Rate: 9600 bpsData Bits: 8Parity: noneStop Bit: 1Control flow: None Figure 4-2. The settings of comm...

13 4-2. Status and Counters Press the Tab or Backspace key to choose action menu, and then press Enter key to select item.

16 4-3. Switch Static Configuration Press the Tab or Backspace key to choose action menu, and then press the Enter key to select item 4-3-1. Administration Configuration

17 4-3-1-1. Device Information Device Name: 10 characters can be used to give the switch a unique name in order to distinguish it on the network. After configuration this name willshow at the top of each menu screen. Device Content: 32 characters can be used to describe devices attached. Device Loca...

18 4-3-1-2. IP Configuration This menu enables the user to change the default settings of the IPaddress, subnet mask and gateway. Rebooting the switch is necessary tohave the configuration change take affect. Note: Always reboot the switch after finishing a new configuration. Actions-> <Edit&g...

23 4-3-4-1. VLAN Configuration Choose a VLAN In the VLAN Configure menu select the type of VLAN you want to configure: NoVLAN (default), Port Based, 802.1Q, or 802.1Q with GVRP. Save theconfiguration. There are 4 different options for VLANs to choose from using the space bar: Disabled, Port Based, 8...

24 Port Based VLANs To configure a new VLAN, select Edit and then use the tab key to select items you want to configure. The space bar allows you to select the different options. In thefollowing configuration, ports 6, 7, and 8 are trunked. After adding a VLAN group, the configuration option Edit a ...

32 4-3-7.Misc. Configuration 4-3-7-1.Port Security A port set in security mode will be “locked” and be without address learning.Only the incoming packets with the source MAC address already existing inthe address table can be forwarded. With port security, users can disable aport from learning new M...

36 4-4.Protocol Related Configuration4-4-1.STP 4-4-1-1.STP Enable This page enables or disables the Spanning Tree function. Press the Space key to select Enabled or Disabled.

37 4-4-1-2.System Configuration The data on the left is for display only. The parameters on the right can beconfigured with new values. Priority: The value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter anumber 1 through...

41 4-4-2-2.Community Strings Community strings serve as passwords and can be entered as one of thefollowing : 1. Read only : Enables requests accompanied by this string to display MIB- object information. 2. Read Write : Enables requests accompanied by this string to display MIB-object information a...

43 4-4-3.GVRP Use the GVRP Configuration screen to enable or disable GVRP (GARPVLAN Registration Protocol) support.Press the Space key to choose Enabled or Disabled. Actions-> <Edit>: Configures all items. When finished, pressing ESC returns to the action menu line. <Save>: Saves all ...

44 4-4-4-1.Aggregator Setting 1. Group: Displays the trunk group ID. NOTE: Before setting LACP support, you must first set the trunk group using the Port / Trunk Configuration screen. 2. LACP: Press the Space key to enable or disable the LACP (Link Aggregation Control Protocol) support. If enabled, ...

49 5.Web-Based Management This section introduces the configuration and functions of the web-basedmanagement of MIL-SM801P, MIL-SM801G and MIL-SM800P switchseries. The managed switch series provides an embedded HTML websiteresiding in flash memory. This feature allows users to manage the switchfrom ...

52 5-3. Port Statistics The following information provides a view of the current status of the unit. A single port counter as follows:

53 5-4.Administrator The management functions include IP address, switch settings, consoleport information, port controls, link aggregation, filter database, VLANconfiguration, spanning tree, port mirroring, SNMP, security manager, TFTPupdate firmware, configuration backup, system reset, and reboot....

54 5-4-2-2.Advanced 1. Miscellaneous Settings: MAC Address Age-out Time: Type the number of seconds that an inactive MAC address remains in the switch's address table. The valid range is300~765 seconds. Default is 300 seconds. Max bridge transit delay bound control: Limits the packets queuing time i...

57 4. IGMP Theory of Operation The following three topologies detail how IGMP Query works and to beconfigured within a network: 1. Auto mode needs to be enabled when the router’s IP address is smaller than other switches in the subnet. 2. IGMP needs to be enabled when the router’s IP address is not ...

62 5-4-5-2. Aggregator Information The LACP Aggregator relation information is displayed as shown. 5-4-5-3. State Activity Active (select) : The active port automatically sends LACP protocol packets. Passive (no select) : The passive port does not automatically send LACP protocol packets, but respon...

65 5-4-6-3. Port Security A port in security mode will be “locked” with address learning blocked. Onlythe incoming packets with SMAC already existing in the address table canbe forwarded normally. The user can disable the port from learning any newMAC addresses, then use the static MAC addresses scr...

66 5-4-7. VLAN Configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcastdomain. It allows you to isolate network traffic so only members of theVLAN receive traffic from the same VLAN members. Basically, creating aVLAN from a switch is logically equivalent to reconnec...

67 5-4-7-1. Basic VLAN Configuration By default, there are no VLANs set for the switch. In order to configure any of thedifferent types of VLANs, VLANs need to be enabled in the switch usingSettings/Advanced/Protocol Enable Settings/VLAN Operational Mode. Thefollowing are the choices offered: Port B...

68 Create a VLAN and add tagged member ports. 1. From the main menu, click Administrator -- VLAN configuration. 2. Click Add. 3. Type a name for the new VLAN.4. Type a VID (between 2-4094). The default is 1.5. From the Available ports box, select ports to add to the switch and click Add . 6. Click A...

69 5-4-7-2. Port VID Configure port VID settings From the main Tag-based (IEEE 802.1Q) VLAN page, click Port VID Settings. Port VID (PVID) Used for setting the Port VLAN ID that will be assigned to untagged trafficon a given port. For example, if port 9's Default PVID is 100, all untaggedpackets on ...

71 Information about the current spanning tree status is displayed in this table. The priority and path cost can be configured for each port. Click the Apply button to modify the configuration . Description Port Priority A change to the Port Priority affects which port will be the root port. The low...

75 5-4-12. TFTP Update Firmware The following menu options provide some system control functions to allowa user to update firmware and remotely boot the switch system: • Executing TFTP software • Copy firmware update version image.bin to TFTP software directory. • In web management select Administra...

76 5-4-13-2. TFTP Backup Configuration Use this screen to set the TFTP server IP address. You can save currentEEPROM value from here, then go to the TFTP Restore Configuration screen to restore the EEPROM value. 5 -4-14. Reset System Reset switch to default configuration. The default value is shown ...

77 6.Technical Specifications This section provides the specifications of MIL-SM800P, MIL-SM801P, andMIL-SM801G switch series. Specifications StandardsCompliance IEEE 802.3 10BASE-T Ethernet,IEEE 802.3u 100BASE-TX/FX Fast EthernetANSI/IEEE 802.3 Auto-negotiation Protocol CSMA/CD Max ForwardingandMax...

79 7.Troubleshooting This section is intended to help you solve some common problemsencountered while using the MIL-SM801P, MIL-SMS801G, and MIL-SM800P switch series. Incorrect connections „ Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK,make sure the ...

80 „ Cabling RJ-45 ports: Use unshielded twisted-pair (UTP) or shielded twisted-pair(STP) cable for RJ-45 connections: 100 Ω Category 3, 4 or 5 cable for 10Mbps connections or 100 Ω Category 5 cable for 100Mbps connections. Be sure that the length of any twisted-pair connectiondoes not exceed 100 me...