Milan Technology NDM-FTX-XX-01 - Manual
Milan Technology NDM-FTX-XX-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Checklist; NDM-FTX Series Fast Ethernet Dual Media NIC; NDM-FTX PCI module configuration
- Page 3 – Fiber cable; Cable Specifications; Copper cable; Technical Specifications
- Page 4 – Troubleshooting; Diagnostics LEDs and Boot ROM; LEDS; Contact Us
- Page 5 – Compliance Information
USER’S GUIDE
NDM-FTX-xxxxx-01
(standard)
NDM-FTX-xxxxx-01(L)
(low profile)
Fast Ethernet Fiber/Dual Media NICs
•
Fast Ethernet
• Copper and Fiber
• 10/100Base-TX and/or 100Base-FX
Transition Networks NDM-FTX series
fast Ethernet dual media NIC
(Network
Interface Card)
provides a 10/100Base-
TX copper port and a 100Base-FX fiber
port for installation flexibility in a
mixed-media environment. The dual
ports can also provide redundancy for
critical applications. These NICs come in standard and low profile form factors, and
include driver support for a variety of operating systems.
NDM-FTX-ST-01
NDM-FTX-ST-01(L)
RJ-45
100 m
(328 ft)
*
ST, 1300 nm multimode
2 km
(1.2 miles
)*
NDM-FTX-SC-01
NDM-FTX-SC-01(L)
RJ-45
100 m
(328 ft)
*
SC, 1300 nm multimode
2 km
(1.2 miles)
*
NDM-FTX-MT-01
NDM-FTX-MT-01(L)
RJ-45
100 m
(328 ft)
*
MT-RJ, 1300 nm multimode
2 km
(1.2 miles)
*
NDM-FTX-SC5-01
NDM-FTX-SC5-01(L)
RJ-45
100 m
(328 ft)
*
SC, 1310 nm single mode
5 km
(3.1miles)
*
RJ-45
100 m
(328 ft)
*
SC, 1310 nm single mode
20 km
(12.4 miles)
*
RJ-45
100 m
(328 ft)
*
NDM-FTX-SB201-01
NDM-FTX-SB201-01(L)
RJ-45
100 m
(328 ft)
*
SC, 1550 TX/1310 nm RX single
mode, single fiber 20 km
(12.4 miles)
*
SC, 1310 TX/1550nm RX single
mode, single fiber 20 km
(12.4 miles)
*
NDM-FTX-SC20-01
NDM-FTX-SC20-01(L)
NDM-FTX-SB202-01
NDM-FTX-SB202-01(L)
Part Number
Port One - Copper
10/100Base-TX
Port Two - Duplex Fiber-Optic
100Base-FX
*Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network
installation.
Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7
NDM-FTX-xxxxx-01
Part Number
Description
BTR-NDM-RPL
RPL, Bootable ROM Chip
BTR-NDM-PXE
PXE, Bootable ROM Chip
Optional accessories sold separately
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Checklist Before installing the NDM-FTX, verify that the package contains the followingitems:• NDM-FTX Board• LAN Driver CD Please notify your sales representative if any item is missing or damaged. Description The NDM-FTX module has a bootable ROM socket (ROM chip sold separately). The...
NDM-FTX Series Fast Ethernet Dual Media NIC 4 Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours The physical characteristics must meet or exceed the IEEE 802.3 specification. Fiber cable Bit error rate: <10-9 Single mode fiber (recommended) : 9 µm Multimode fiber (recommende...
NDM-FTX Series Fast Ethernet Dual Media NIC 6 Tech Support: 1-800-260-1312 International: 00-1-952-941-7600, 24 hours Troubleshooting Diagnostics LEDs and Boot ROM LEDS The LINK/ACT LED lights when a fiber cable or twisted pair cable connectionis good. It blinks to indicate activity. The collision a...
