Milan Technology MIL-S801XX - Manuals

Page 3 - Contents; Hardware Description

Contents 1. Introduction 1 Features 2 Package Contents 2 2. Hardware Description 4 Front Panel 4 MIL-S801XX 9 port switch with SC fiber port 4 MIL-S801XX 9 port switch with SC (Single-mode) fiber port 5 MIL-S801XX 9 port switch with ST fiber port 5 MIL-S801XX 9 port switch with MT-RJ fiber port 6 MI...

Page 4 - Introduction

1. Introduction MiLAN’s MIL-S801XX switch with a fiber port is a compact desktop sizeswitch, which is an ideal solution for many network users. It provideswire-speed, Fast Ethernet switching function that allows high-performance, low-cost connections. Figure 1. The MIL-S801XX The MIL-S801XX nine por...

Page 6 - Front Panel

2. Hardware Description This Section mainly describes the hardware of the MIL-S801XX switch. Theswitch is compact (10 inches) with eight 10/100BASE-TX UTP ports plus one100BASE-FX fiber port. The physical dimensions of the MIL-S801XX switch are: 250mmx 132mmx 37mm (L 9.8”x W 5.2”x H 1.5”) Front Pane...

Page 7 - MDI; means connecting to another Hub or switch while; MDIX; means connecting to a workstation or PC. Therefore,

MIL-S801XX switch with ST fiber port Figure 2-3. The Front Panel of the MIL-S801XX switch with ST fiber port MIL-S801XX switch with MT-RJ fiber port Figure 2-4. The Front Panel of the MIL-S801XX switch with MT-RJ fiber port MIL-S801XX switch with VF-45 fiber port Figure 2-5. The Front Panel of the M...

Page 8 - Power; LED

LED Indicators The following table provides descriptions of the LED statuses and meaning.They provide a real-time indication of systematic operation status. Power On Green Power On On Green The port is successfully connectingwith the device. Blinks The port is receiving or transmittingdata. LNK / AC...

Page 9 - Rear Panel; Desktop Installation; Remove adhesive backing from your Rubber Feet.

Rear Panel The 3-pronged power plug is located at the Rear Panel of the 9-Portswitch as shown in Figure 2-6. The switch will work with AC in the range100-240V AC, 50-60Hz. Figure 2-6 The Rear Panel of the MIL-S801XX switch Desktop Installation Set the switch on a sufficiently large flat space with a...

Page 10 - Network Application; Desktop Application

3.Network Application This section provides two samples of network topology in which the switch isused. In general, the MIL-S801XX switch is configured for use as a desktop orsegment switch. The MIL-S801XX switch networks PCs, workstations, and servers to eachother by connecting these devices direct...

Page 11 - Segment Application

Segment Application Any of the RJ-45 ports on the MIL-S801XX switch can connect with otherswitches or Hubs to interconnect small workgroups to form larger switchednetworks. You can also use fiber ports to connect switches. The distancebetween two switches via fiber cable can be up to 2Km or up to 60...

Page 12 - cable for 10Mbps

4.Trouble Shooting This troubleshooting section is intended to help you solve the mostcommon problems on the MIL-S801XX switch. The switch can be easily monitored through panel indicators to assist inidentifying problems. This section describes common problems you mayencounter and where you can find...

Page 13 - Technical Specifications; Specifications

5.Technical Specifications This section provides the specifications for the MIL-S801XX switch Specifications Standards Compliance IEEE 802.3 10BASE-T Ethernet,IEEE 802.3u 100BASE-TX/FX Fast EthernetANSI/IEEE 802.3 Auto-negotiation Protocol CSMA/CD Max Forwarding Rate andMax Filtering Rate 14,880 pps...