Milan Technology MIL-S800 - Manuals

Page 3 - Table of Contents

Table of Contents Chapter 1. Introduction Pg 1 1-1 General Description……………………………………. Pg. 1 1-2 Key Features……………………………………………… Pg. 1 1-3 Package Contents……………………………………… Pg. 2 1-4 Hardware Description………………………………….. Pg. 3 Chapter 2. Hardware Installation Pg 4 2-1 Quick Installation………………………………………... ...

Page 4 - Chapter 1 Introduction; -1 General Description

1 Chapter 1 Introduction 1-1 General Description The MIL-S800 switch provides eight auto-sensing 10/100Mbps RJ45 Ethernet ports. This high performance, low cost, wire speed desktop switch is ideal for any network where 8 ports are needed, for a solution to an enterprise need or for a home network. T...

Page 5 - -3 Package Contents

2 1-3 Package Contents Your package contents should include the following parts: • One 8-port Auto-sensing switching Hub • One DC power adapter • This User’s Guide • Four rubber feet with adhesive pads • Two magnets • Warranty card Figure 1. Package contents

Page 6 - -4 Hardware Description

3 1-4 Hardware Description The Front Panel The front panel contains power and LED Indicators. Figure 2. Front panel view of the MIL-S800 Front panel LED Indicators Per Device Power 100M (Link on 100Mbps) LNK/ACT (Link/Activity) Per Port FDX/COL (Full Duplex/Collision) For LED details, please refer t...

Page 7 - Chapter 2 Hardware Installation; -1 Quick Installation

4 Chapter 2 Hardware Installation 2-1 Quick Installation • The MIL-S800 should be placed in a well-ventilated room with proper temperature and humidity. • Do not place the unit near water. • The maximum distance between the port to the standard network interface is 100 meters. • For desktop installa...

Page 8 - -2 LED Descriptions

5 2-2 LED Descriptions Figure 5. Front panel view of LED indicators The following table lists the LEDs and their function.

Page 9 - Chapter 3 Network Application

6 Chapter 3 Network Application 3-1 Stand Alone The application of a simple standalone switch is illustrated below. The maximum distance between the switch and the workstation is 100 meters. Figure 6. The switch as a backbone for a small 10/100BASE-TX network 3-2 Network You can cascade the MIL-S800...

Page 10 - Chapter 4 Troubleshooting

7 Chapter 4 Troubleshooting • Power If the power indicator is not on after the power cord is plugged in, check the power outlet or power cord. If you lose power after the switch has been operating for some time, check for loose power connections, power losses or surges at the power outlet. Disconnec...

Page 11 - Chapter 5 Product Specification; -1 General Specification

8 Chapter 5 Product Specification 5-1 General Specification Standard Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet Number of Ports 8 10/100Mbps Auto-sensing RJ-45 ports Data Transfer Rate Ethernet :10Mbps(half duplex) 20Mbps(full duplex) Fast Ethernet : 100Mbps(half du...