Milan Technology MIL-S2400 - Manuals

Page 3 - Contents; Ethernet Switching Technology .....................................; Hardware Description; LED Indicators .............................................................; Optional Fiber Modules; Installing 100Base-FX Module .............................................. 15; Network Application

Contents 1. Introduction …….…………….…………….……….………….…… 1 Features …………………………………………..…..…….… 2 Package Contents ………………………..…..……….……… 3 Ethernet Switching Technology ………………….…………… 4 2. Hardware Description ………………..….…..…...………….………… 6 Front Panel ………………………………………...…...………… 6 LED Indicators …………………………………...

Page 4 - Introduction; Ethernet Switching Technology

Introduction Ethernet Switching Technology Ethernet Switching Technology dramatically increases the total bandwidth of a network, eliminatescongestion problems inherent with ( CSMA/CD ) protocol, which greatly reduces unnecessarytransmissions. Switch Technology has revolutionized networking. First, ...

Page 6 - Hardware Description; Front Panel

Hardware Description This Section mainly describes the hardware of the MIL-S2400 and MIL-S1600 Switches, andgives a physical and functional overview of each Switch. Front Panel The Front Panel of the MIL-S2400 and MIL-S1600 Switches consists of 16 or 24 10/100Base-TXRJ-45 ports ( Auto MDI/MDIX ) and...

Page 7 - LED Indicators; Full

LED Indicators The LED Indicators gives a real-time information of systematic operation status. The followingtable provides descriptions of LED status and their meaning. Figure 2-2. LED Indicators LED Status Description Green Power On Off Off Green The port is operating at the speed of 100Mbps. 100M...

Page 8 - Rear Panel; Desktop Installation; Attaching Rubber Feet

Rear Panel The 3-pronged power plug, On/Off switch, and ventilation fan are located at the rear panel of the MIL-S2400 and MIL-S1600 Switches as shown in Figure 2-2. The Switch will work in the range 100-240VAC, 50-60Hz. Figure 2-3. The Rear Panel of MIL-S2400 and MIL-S1600 Switches Desktop Installa...

Page 9 - Rack-mounted Installation; Figure 2-4. Attach mounting brackets with screws; Power On

Rack-mounted Installation The MIL-S2400 and MIL-S1600 switches includes a rack-mounted kit and can be mount in an EIAstandard size, 19-inch Rack, enabling the switch to be placed in a wiring closet with other equipment. Perform the following steps to rack mount the switch: A. Position one bracket to...

Page 10 - Optional Fiber Modules

Optional Fiber Modules This section introduces the optional 100Base-FX Modules which can be installed on the frontpanel of the MIL-S2400 and MIL-S1600 Switches. Each optional 100Base-FX Module has a one-port fiber connector. The 100Base-FX Modules are designed to extend the distance between switch a...

Page 13 - Installing 100Base-FX Module

Installing 100Base-FX Module The optional 100Base-FX Modules are designed to be inserted in the extension slot. Before installation, ensure that the power is disconnected. The module is NOT hot-swappable. Follow the steps below to install the optional 100Base-FX Module: 1. Power the MIL-S2400 and MI...

Page 14 - Troubleshooting; Faulty or loose cables

Troubleshooting This section is intended to help you solve the most common problems on the MIL-S2400 and MIL-S1600 Switches. n Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections aresnug. IF that does not correct the problem, try ...

Page 15 - Technical Specification; Specifications

Technical Specification Specifications Standard IEEE 802.3 10Base-T Ethernet,IEEE 802.3u 100Base-TX/FX Fast Ethernet Protocol CSMA/CD Max Forwarding Rate andMax Filtering Rate 14,880 pps per Ethernet port,148,800 pps per Fast Ethernet port LED Indicators 10/100 UTP Port: 100M, LK/ACT, Full ( 3 LEDs)...