Milan Technology MIL-S16000T - Manuals

Package Contents Unpack the contents of the package and verify them against the checklist below. „ MIL-S16000T Gigabit Ethernet Switch „ AC Power Cord „ Rack Mount Ears „ Four Adhesive Rubber Feet „ User's Guide „ Warranty Card If any item is missing or damaged, please contact your local dealer for ...

2. Hardware Description Front Panel The front panel of the Gigabit Ethernet Switch consists of 16 1000BASE-T Gigabit Ethernet ports and the LED Indicators for the unit, which displays the conditions of the Gigabit Ethernet Switch and the status of the network. Figure 2-1. Front Panel view of the MIL...

LED Indicators The LED indicators of the Gigabit Ethernet Switch provide a real-time indication of system operating statuses. There are three LED-indicators for each Gigabit Ethernet port and one Power LED for the Unit. Figure 2-3. LED Indicators on the MIL-S16000T Gigabit Ethernet Switch POWER The ...

3. Hardware Installation Desktop Installation Set the switch on a sufficiently large flat space with a power outlet nearby. The surface where you put your switch should be clean, smooth, level, and sturdy. Provide enough clearance around the switch to allow attachment of cables, power cord and air c...

Rack-mounted Installation The MIL-S16000T comes with a rack-mounted kit and can be mounted in an EIA standard size, 19-inch rack. The Switch can be placed in a wiring closet with other equipment. Perform the following steps to rack mount the switch: A. Position one bracket to align with the holes on...

Power On Connect the power cord to the power socket on the rear panel of the Switch. Connect the other end of the cord to an appropriate power outlet. Press the power On/Off switch to the on position and check the power indicator on the front panel to see if power is properly supplied. 8

4. Technical Specifications General Specifications Standards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data Transfer Rate: 10Mbps (Half-duplex) Ethernet: 20Mbps (Full-duplex) 100Mbps (Half-duplex) Fast Ethernet: 200Mbps (Full-duple...

Performance Specifications Transmission Method: Store-and-forward RAM Buffer: 272K Bytes per device Filtering Address Table: 4K MAC address per device Packet Filtering/Forwarding Rate: Full wire speed MAC Address Learning: Self-learning, auto-aging 10

Appendix A: Regulatory Information FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is ope...