Miele TWC640WP EcoSpeed&8kg - Manuals

Warnings and safety instructions 7 It is essential to read these instructions. This tumble dryer contains a refrigerant that is flammable and ex-plosive. This tumble dryer complies with all current local and nationalsafety requirements. However, inappropriate use can lead to per-sonal injury and dam...

Warnings and safety instructions 8  It must be used only as a domestic appliance to dry items which have been washed in a water solution and which are marked on themanufacturer's care label as being suitable for tumble drying. If usingdry cleaning kits, do so at your own risk, and follow the instru...

Warnings and safety instructions 11  The accessibility of the plug must always be ensured, in order to disconnect the tumble dryer from the mains.  Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder asufficient flo...

Warnings and safety instructions 12  To prevent the risk of fire, textiles that have not been cleaned thor- oughly or are still soiled with deposits of any kind must not be driedin this tumble dryer. This applies in particular to textiles that - have not been washed.- have not been thoroughly clean...

Warnings and safety instructions 14  Always keep the area around the tumble dryer free of dust and fluff.Dust drawn into the tumble dryer can cause blockages in the heat ex-changer over time. Using a fragrance flacon (optional accessory)  Only use genuine Miele original fragrance flacons.  The fr...

Warnings and safety instructions 15 Accessories  Only use genuine Miele original spare parts and accessories with this appliance. If non-Miele parts are used, warranty, performanceand product liability claims will be invalidated.  The tumble dryer can be combined with a Miele washing machine in a ...

Operating the tumble dryer 16 Control panel           a Control field The control field consists of varioussensor controls, a time display andindicator lights. b Sensor controls for drying levels After selecting a drying level pro-gramme with the programme se-lector, the recommended drying...

Operating the tumble dryer 17 f Time display After the programme has started, theprogramme running time will appearon the display in hours and minutes.– When Delay start is being used, the programme running time willappear after the Delay start periodhas elapsed. – With most programmes, the run- nin...

Operating the tumble dryer 18 How the sensor controls work The  ,  ,  and   sensor controls re- act to fingertip contact. If a sensor con-trol is lit, it can be selected.If a sensor control is brightly lit, thismeans it is currently selected.If a sensor control is dimly lit, thismeans it can be ...

Before using for the first time 19 Installation Before using the appliance for thefirst time, check that you have fol-lowed all the instructions under “In-stallation”.Read these operating instructions,paying particular attention to the in-formation provided under “Installa-tion”. Removing the protec...

Before using for the first time 20 Availability of the WiFi connection The WiFi connection shares a frequencyrange with other appliances (includingmicrowave ovens and remote controltoys). This can give rise to sporadic oreven complete connection failures.Therefore, the availability of featuredfuncti...

Before using for the first time 21 Setting up Miele@home There are 2 ways of connecting: 1. Via the Miele app (default)2. Via WPS To do so, you will need a WPS-com-patible router. Logging in via the Miele app The Miele app can be used to connectto your network.  Turn the programme selector to Mo- b...

Energy saving tips 22 This dryer with heat-pump technologyis designed for energy-saving dryingcycles. However, you can save a littlemore energy with the following meas-ures as the drying time is not extendedunnecessarily. - Make sure your laundry is spun at the maximum spin speed before drying.The h...

1. Notes on correct laundry care 23 Points to note regardingwashed laundry - When washing very heavily soiled items ensure that you use sufficientdetergent and select a high temperat-ure. If in doubt, wash the items sev-eral times. - Do not put soaking wet items into the tumble dryer. Make sure your...

1. Notes on correct laundry care 24 Drying Tip: Read the “Programme chart”, which contains a complete list of data for pro-grammes and load sizes.- Always observe the maximum recom- mended load size for each pro-gramme. This will mean that the en-ergy consumption for the amount oflaundry is at its m...

2. Load the tumble dryer 25 Loading the laundry Preventing damage to fabrics.Before loading the dryer, read “1.Notes on correct laundry care”.  Open the door.  Remove any items that have been leftinside the drum.  Unfold the laundry and load looselyinto the drum. Do not overload the drum. Doing s...

3. Select a programme and start it 26 Switching on the tumble dryer The tumble dryer is switched on by se-lecting a programme and switched offby turning the programme selector tothe  position.  Turn the programme selector to a pro-gramme. Selecting a programme There are 3 possible ways to select a...

3. Select a programme and start it 27 Selecting programme settings Selecting the drying level  Touch the sensor control for the dry-ing level you want. The selected drying level lights upbrightly. Selecting the programme running timefor Time Dry/DryFresh The programme running time can be se-lected ...

3. Select a programme and start it 28 Starting a programme  Touch the flashing Start/Add laundry sensor control. The Start/Add laundry sensor control lights up. Programme sequence - The tumble dryer constantly measures the drying level and calculates the re-quired programme running time basedon the...

4. Remove the laundry 29 End of programme/Anti-crease End of programme:   lights up in the time display and the Start/Add laundry sensor control goes out. A buzzersounds. Or in some cases bars flash inthe time display (   ...    ...    ...) The end of the programme is followedby the ant...

  Delay start/SmartStart 30 Selecting the Delay start func-tion With Delay start, you can delay thestart of a programme from   minutes up to   (hours). Delay start cannot be used with the Warm air/DryFresh programme.  Start by selecting a programme withprogramme settings.        Tou...

  Delay start/SmartStart 31 SmartStart The SmartStart function lets youdefine a time period during which yourtumble dryer will start automatically.The appliance will start on receipt of asignal, e.g. from your energy supplier,that indicates that the electricity tariffis particularly economical.This...

Programme chart 32 All weights marked with * are based on the weight of dry laundry. Cottons  max.  8 kg* Use for Cotton items such as those described under Cottons Cupboard Dry with normal residual moisture. Note - Items are dried to a Cupboard Dry level only in this programme. - The Cottons  pro...

Programme chart 34 Proofing max.  2.5 kg* Use for Fabrics suitable for tumble drying, e.g. microfibre fabrics; skiwear;outdoor clothing; fine, close-weave cotton garments (poplin); andtablecloths. Note - With this programme, items can only be dried to the Cupboard Dry level. - This programme include...

Changing the programme sequence 35 Changing a programme once ithas started It is no longer possible to change theselected programme. This is to preventthe operation of the machine beingtampered with.If you adjust the programme selector,the   symbol will light up in the time display. The   symb...

Condensed water container 36 Emptying the condensed watercontainer Condensate container The condensed water is collected inthe condensate container. Emptying interval: empty the condens-ate container after every drying pro-gramme.The  indicator light will light up if the maximum level of the conden...

Fragrance flacon 37 FragranceDos Fragrance flacons (optional accessor-ies) can be used to give your laundry apleasant scent. Tip: You can simply close the fragrance flacon if you want to dry textiles withoutadding fragrance.  Risk of fire and damage to health if fragrance flacons are used incor-rec...

Fragrance flacon 38 Inserting a fragrance flacon  Open the door of the tumble dryer. The fragrance flacon is inserted in theupper fluff filter in the opening on theright hand side beside the grip.  Open the cover using the tab until thetab is at the top right hand side asshown.  Insert the flacon...

Fragrance flacon 39 Opening the fragrance flacon Before drying, you can select the intens-ity of the fragrance.  Turn the outer ring clockwise: the fur-ther you open the fragrance flacon,the more intense the fragrance. Damp laundry and longer drying dura-tions with sufficient heat transfer areneede...

Fragrance flacon 40 Removing /replacing the fra-grance flacon    Turn the outer ring anti-clockwise un-til the markers a and b line up.  Replace the fragrance flacon with anew one. When not in use, you can store the fra-grance flacon in its original packaging.Replacement interval: replace the fr...

Cleaning and care 41 Cleaning the tumble dryer Disconnect the tumble dryer fromthe electrical supply.  Damage due to the use of unsuit- able care products.Unsuitable care products could dam-age plastic surfaces and other parts.Do not use any solvents, abrasivecleaners, glass cleaners or all-pur-pos...

Cleaning and care 43  Hold the rotary control and pull thefluff filter forwards to remove it.  Use a vacuum cleaner with a longcrevice nozzle attached to remove anyvisible fluff from the upper air flowopenings. Clean all fluff filters with water. Cleaning the fluff filters with water  Wipe the sm...

Cleaning and care 44  Clean the residual moisture sensorwith a damp cloth and a small amountof soapy water.  Wipe the residual moisture sensor drywith a soft cloth.  Close the tumble dryer door. Cleaning the plinth filter Environmental impact due to fluffwhich has been disposed of incor-rectly.To...

Cleaning and care 45 Cleaning the plinth filter  Pull the handle out of the plinth filter.  Clean the plinth filter carefully andthoroughly under running water.  To collect the cleaning water, place a bowl or bucket under thestopcock. Tip: To speed up the removal of residue from the surface, run ...

Cleaning and care 46 If a drying programme is interruptedwith a fault message after the cleanplinth filter has been refitted, the plinthfilter was too wet when it was refitted.Carefully squeeze the water out of theplinth filter again. Leave the plinth filterto air-dry.If a fault occurs again despite...

Cleaning and care 47  Damage or ineffective drying if drying takes place without a plinth fil-ter or when the heat exchanger ac-cess panel is open.An excessive accumulation of fluffcan damage the tumble dryer. If thesystem is not leak-tight, this canmake drying ineffective.Only operate the tumble d...

Problem solving guide 48 Many malfunctions and faults that can occur in daily operation can be easilyremedied. You can save time and money in many cases, as you do not need to callthe Miele Customer Service Department.Information to help you rectify faults yourself can be found at www.miele.com/ser-...

Problem solving guide 49 Problem Cause and remedy  and  flash, a signal sounds.The   indicator light comes on. The system has been clogged by fluff or detergentresidue.  To deactivate the message, turn the programme se-lector to the   position.  Clean the fluff filters and the plinth filter....

Problem solving guide 50 Indicator lights or information on the time display Problem Cause and remedy The   indicator light comes on at the end ofthe programme. The tumble dryer is not working correctly or econom-ically. Possible causes could be clogging caused byfluff or detergent residue.  To sw...

Problem solving guide 51 Unsatisfactory drying results Problem Cause and remedy The laundry is not suffi-ciently dry. The load consisted of different types of fabric.  Finish drying using the Warm air programme.  Select a more suitable programme next time. Useful tip: You can alter the drying leve...

Problem solving guide 52 The drying cycle duration is very long Problem Cause and remedy The drying process goeson too long or evenswitches off.* The room where the tumble dryer is located is toowarm.  Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the fil-ters.  C...

Problem solving guide 53 Other problems Problem Cause and remedy There are hummingnoises The compressor is operating. These noises are quite normal and do not indicate afault. A programme does notstart No obvious cause.  Connect the tumble dryer to the mains  Turn on the tumble dryer  Close the d...

Problem solving guide 54 Replacing the plinth filter The heat exchanger can clog up.Replace the plinth filter immediatelyif you see the following signs of wearbefore or after cleaning (optional ac-cessory). Poor fit The edges of the plinth filter do not sitproperly and the plinth filter is out ofsha...

Problem solving guide 55 cases, they can form stubborn crust. Residues are a sign that the plinth filterno is longer a snug fit at the sides, evenif it appears to be perfect:fluff is getting in unfiltered at the edges.Reactivate the plinth filter. If theseresidues appear on the plinth filter againso...

Service 56 Information to help you rectify faultsyourself and about Miele spare partscan be found at www.miele.com/ser-vice. Contact in the event of a fault In the event of any faults which you can-not remedy yourself, please contactyour Miele dealer or the Miele Cus-tomer Service Department. You ca...

Service 57 Optional accessories Optional accessories for this tumbledryer are available from Miele or fromyour Miele dealer.You also can order these and manyother useful products from the Mieleonline shop. Dryer basket The dryer basket is enables items whichmust not be subjected to mechanicalaction ...

Installation *INSTALLATION* 58 Front view a Mains connection cable b Control panel c Condensed water container d Door e Plinth filter flap f 4 height-adjustable feet g Cooling air grille h Drain hose for condensed water

Installation *INSTALLATION* 59 Rear view a Protruding lid for holding when mov-ing the appliance b Drain hose for condensed water c Hook for winding up the mains con-nection cable during transport d Mains connection cable Transporting the tumble dryer  Danger of injury to people and damage to prope...

Installation *INSTALLATION* 60 Installation Levelling the tumble dryer Ensure that no closeable door, slidingdoor or oppositely hinged door is in-stalled that could hinder opening ofthe tumble dryer door in any way. To ensure proper operation, the tumbledryer must stand perfectly level. Thescrew fee...

Installation *INSTALLATION* 61 Ventilation The cool air intake at the front of thetumble dryer must not be blocked orcovered. This would hinder a suffi-cient intake of cool air for the heatexchanger. Do not block the gap between thebottom of the tumble dryer and thefloor with plinth facings, deep pi...

Installation *INSTALLATION* 62 External condensed water out-let Note When drying is in progress, condensedwater is pumped into the condensedwater container through the drain hosewhich is located at the back of thedryer. The condensed water can also be ex-ternally drained away via the drain hoseat th...

Installation *INSTALLATION* 63 There will be a small amount of residualwater left in the drain hose. Have a con-tainer ready to collect this.  Pull the drain hose off its connection(light arrow).  Pull the hose out of the holders (darkarrow) and unwind it.  Allow any residual water to run into ac...

Installation *INSTALLATION* 65 Changing the door hinging You can change the door hinging onthis tumble dryer yourself. For safety reasons the tumble dryermust be disconnected from the elec-tricity supply before changing thedoor hinging. You will need: - a Torx T20 and T30 screwdriver- a flat head sc...

Installation *INSTALLATION* 66  Turn the door lock through 180°.    Press the door lock into openings  on the opposite side of the dooropening.  Adjust the position of the door lock sothat the screw holes line up withthose in the front panel of the dryer  .  Secure the door lock with the two...

Installation *INSTALLATION* 67  Insert the lock catch into the newcover supplied with the dryer.  Place this new cover to one side fornow. 4. Dismantle the door hinge from thedoor The door hinge cover must be unclippedfrom position  and then removed.   1. 2.  Use a screwdriver to press downgen...

Installation *INSTALLATION* 68 5. Change over the door hinge on thedoor The door hinge is secured to the doorwith 2 angled rods. These rods need tobe removed with a screwdriver orpointed pliers.   Insert the end of the screwdriverblade under rod  and rotate it so it is in an upright position. Do ...

Installation *INSTALLATION* 69  Fit new door hinge cover  and clip it into position. 6. Change the lock catch on the door  You now need the new lock catch cover supplied with the dryer whichyou have already fitted with the lockcatch.    Push lock catch cover  with its lock catch into position...

Installation *INSTALLATION* 70 Refitting 7. Refit the door  Press the rubber seal back into thegrove on the door.  Position the door in front of the dryer.  Fit the base of the door hinge with its2 pins into the openings on the dryer. The base of the door hinge must beflush with the front panel o...

Installation *INSTALLATION* 71 Electrical connection The tumble dryer is supplied with amains cable with moulded plug readyfor connection to a suitable earthedsocket.The socket must be easily accessibleafter the tumble dryer has been in-stalled. If the socket is not easily ac-cessible, ensure that a...

Technical data 72 Height 850 mm Width 596 mm Depth 655 mm Depth with door open 1077 mm Suitable for pushing under a worktop Yes Suitable for stacking Yes Weight approx. 52 kg Drum volume 120 litres Load size 8 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.49 m ...

Technical data 73 Data sheet for household tumble driers In acc. with delegated regulation (EU) No. 392/2012 MIELE Model name/identifier TWC640WP Rated capacity 1 8,0 kg Type of tumble drier (Air-vented / condenser) - / ● Energy efficiency class A+++ (most efficient) to D (least efficient) A+++ Weig...

Technical data 74 6 For the standard cotton programme at full load. EU Conformity declaration Miele hereby declares that this heat-pump tumble dryer complies with Directive2014/53/EU. The complete text of the EU declaration of conformity is available from one of thefollowing internet addresses: - Pr...

Consumption data 75 Load size 1 Final spin speed in washing machine Residual moisture Energy Running time kg rpm % kWh min Cottons  2 8.0 4.0 1000 1000 60 60 1.40 0.81 170 111 Cottons Cupboard Dry 8.0 8.0 8.0 1200 1400 1600 53 50 44 1.25 1.20 1.05 154 146 130 Cottons Hand iron 8.0 8.0 8.0 8.0 1000 ...

Programmable functions 76 Programming You can use the programmable func-tions to alter the dryer's electronics tosuit your requirements. Programming is carried out by followingthese steps (  ,  ,  ...  ) using the sensor controls. Accessing the programming level Before starting - Make sure that ...

Programmable functions 77  * RemoteUpdate  * SmartGrid   * Remote control * only visible after networking  Confirm the selected programmablefunction by touching the Start/Add laundry sensor control. Editing and saving a programmablefunction You can either switch a programmablefunction on/o...

Programmable functions 78   Factory default The programmable functions are resetto the factory default settings.  = The factory default is set  = Reset the programmable func- tions to the factory default set-tings  Cottons drying levels You can adjust the drying levels for the Cottons pr...

Programmable functions 79   Buzzer volume The buzzer volume can be changed.  = Quieter  = Factory default setting   Keypad tone The buzzer that sounds when a sensorcontrol is pressed can be changed orswitched off.  = Off  = Factory default  = Louder  PIN code The PIN code pre...

Programmable functions 80    Control field switch-off be- haviour To save energy, the time display andsensor controls will go out once theprogramme has been running for10 minutes. In this case, the Start/Add laundry sensor control flashes slowly. However, there is no switch-off in theevent of a f...

Programmable functions 82   Operating hours You can read off how many hours thetumble dryer has been in operation for. The total running time is shown on thetime display in single digits. For ex-ample, if the tumble dryer has been inoperation for 1234 hours, the time dis-play will show an  follo...

Programmable functions 83 Running RemoteUpdate Information about the content andscope of an update will be provided inthe Miele app. The message  will appear on the time display if an update is available.You can install the update immediatelyor postpone this until later. When thetumble dryer is sw...

Programmable functions 84 Postponing the update After the tumble dryer is switched on,  appears on the time display.  Touch the   sensor control. The next time you switch on the appli-ance, you will be prompted to start theupdate again.   Remote control You can use the Miele app to checkthe s...

United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TWTel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: [email protected] Australia Miele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 398Level 4, 141 Camberwell RoadHawthorn East, VIC 3123Tel: 1300 464 353E-mail: [em...