Miele T 1313 - Manuals

a e- "PROGRAMS" buttons For selecting a drying program. b "OPTIONS" buttons For selecting a drying option. c "DRYNESS" button For selecting the dryness level offinished laundry. d "STATUS" display Shows the current cycle of the dryingprogram. e "Buzzer" button...

The dryer must be correctly installedand connected before the first use.Please refer to the "InstallationInstructions". ^ Before using for the first time cleanthe drum with a cloth. Before drying, check fabric carelabels for special drying instructions. q Dry with normal temperature r Dry wi...

1. Turn on the dryer and loadthe laundry ^ Press the "On/Off" button to turn onthe dryer. ^ Press the "Door" button to open thedoor. ^ Load the laundry loosely into thedrum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - donot push it shut. For best r...

4. Select the dryness level The dryness level can be selected inthe "Normal" and "Wrinkle-free"programs. (The dryness level of theother programs cannot be adjusted.) ^ Press the selection button until thedesired indicator illuminates. In the "Wrinkle-free" program, only"M...

6. Start the program ^ Press the "Start/Stop T " button. Once the program starts, the currentcycle of the program will be indicatedin the "STATUS" display. 7. At the end of a program The "Anti-crease/End" indicator will lightat the end of a program and the buzzerwill sound if...

Child lock When activated, the child lock preventsthe dryer from being operated bylocking the control panel functions. The dryer can be turned on but notstarted. The "Child lock" indicator willflash. The door can be opened. To activate the child lock 1. Make sure the dryer is turned off and ...

Cleaning the lint filter , A clogged filter is a fire hazard! The lint filter must be cleaned afterevery program. ^ Open the door and remove the lintfilter by gently lifting it upwards. ^ Wipe the lint off the filter with yourhand (do not use any sharp objects!) ^ Any lint remaining in the hollow pa...

Cleaning the exterior and thecontrol panel , To reduce the risk of electric shock, disconnect the dryer from thepower supply by shutting off thepower main, tripping the circuitbreaker or unplugging the powercord before performingmaintenance.Never use abrasive cleaners,scouring pads, steel wool or ca...

Changing the light bulb , To reduce the risk of electric shock, disconnect the dryer from thepower supply by shutting off thepower main, tripping the circuitbreaker or unplugging the powercord before performingmaintenance. ^ Open the door. The bulb cover is located along theupper rim of the drum ope...

What if the dryer will not run? Possible fault Fix The "Start/Stop T " button was not pressed. Make sure the dryer is on. Press the "Start/Stop T " button to begin the drying program. The circuit breaker tripped or thedryer is unplugged. Make sure the dryer is plugged in or resetthe ...

What if the "Filter/Vent" indicator lights after cleaning the exhaust system? Possible fault Fix The dryer is not operating efficientlybecause the duct hose is too long. Check the exhaust length and diameter(see "How to calculate the effectiveduct length"). A long exhaust hose willin...

Quick Guide Remove this guide for easy reference Please read allinstructions, especiallythe "Important Safety Instructions", before using the dryer.

In the event of a fault you cannot fixyourself, please contact the MieleTechnical Service Department U [email protected] V [email protected] When contacting Technical Service,please quote the model and serialnumber of your appliance. They can befound on the data plate ...

Disposal of the packingmaterials The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. To prevent suffocation of children,ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of ...

GROUNDING INSTRUCTIONSThis appliance must be grounded.In the event of malfunction orbreakdown, grounding will reducethe risk of electric shock byproviding a path of least resistancefor electric current. This appliance isequipped with a cord having anequipment grounding conductor anda grounding plug....

a Exhaust connection: The exhaust hose can be installedeither at the rear, left or right of thedryer. b Power cord with plug c Control panel d Door e Four height adjustable feet Installation 26

Leveling the dryer The dryer must be level to ensure safeand proper operation. Minordiscrepancies do not have an adverseeffect on operation. The machine can be leveled by turningthe legs clockwise or counterclockwiseas necessary. Installation 27

Installation tips An airflow gap of 3 / 8 " (10 mm) must be provided between the machineand the floor. This airflow gap mustnot be blocked by a toekick or thickpiled carpets. Do not install the dryer next to arefrigerator. The warm air exhaustingfrom the dryer can affect thethermostat of the ref...

Direct wall connection Necessary materials: – a wall pipe – flexible foam gasket Dryer top view 1 Wall pipe 2 Flexible foam gasket Dryer side view 1 Wall pipe 2 Flexible foam gasket ^ Insert the ring adapter, 1 , into the wall pipe.Connect the flexible foam gasket, 3 , to the wall pipe connector, 2 ...

How to calculate the effectiveduct length The overall duct length will determinethe duct diameter. ^ Measure the actual duct lengthneeded to go from the dryer’sexhaust connection to the vent outlet: 1. Establish the number of elbows or bends necessary, noting the type ofbend, angle and radius involv...

Example: Calculating the effective duct length and required internalduct diameter Rigid pipe Duct length ft Duct length m A Wall duct withlouvered wall vent 12’ 5" 3.8 m B 90° bend 2’ 7" 0.8 m C 20" (0.5 m) rigid pipe 1’ 7" 0.5 m D 90° bend 2’ 7" 0.8 m E left vent opening 3’ 3...