Miele S 246i - Manuals

Disposal of an old appliance Before discarding an old vacuumcleaner, please cut off the power cordand render the plug useless. Ensurethe appliance presents no danger tochildren while being stored for disposal. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 6

Disposal of the packingmaterials The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of children.Danger of suffocation! Disp...

Attaching the suction hose ^ Insert the elbow into the suctionsocket. Removing the suction hose ^ Press the release buttons at the sideof the elbow and lift the hose from thesocket. Connecting the suction hoseand the telescopic wand ^ Fit the handpiece of the suction hosefirmly into the wand. (Ensur...

The accessory tools for cleaning toughto reach areas are located in theaccessory compartment. – Crevice nozzle – Upholstery tool ^ Press the release button to open theaccessories compartment lid. ^ Remove the accessory tool. ^ Close the lid. Included accessories 13

Power cord Unwinding ^ Hold the plug and unwind as much ofthe cord as you need (maximumlength 21’ 4" [6.5 m]). , If the vacuum is operated for more than 30 minutes, atleast 14 feet(4.3 m) of the power cord must beunwound to prevent overheating. Rewinding ^ Unplug the vacuum from the outlet. ^ St...

Turning the vacuum on and off To turn the vacuum cleaner on or off: ^ Step on the On-Off foot switch. , To prevent static discharge, your hand must touch the metal inlay onthe underside of the vacuum hand-piece. Be certain to continuouslytouch this inlay when vacuuming finedust, flour, or saw dust a...

Selecting the suction power (models with suction power selector) The suction power can be regulated tosuit the type of flooring. Select themiddle suction setting (symbol d ) for smooth and hard floors and a highersetting for carpets. Rotary selector ^ Turn the suction power selector to theappropriat...

Opening the air inlet valve The air inlet valve can be opened for aquick reduction of suction, e.g. whenmoving from a carpet to an area rug. ^ Slide open the air inlet valve justenough for the floor brush to moveeasily. Use 18

Transport and storage (models with wand bracket) For easier transport and storage, thetelescopic wand can be attached to thevacuum handle. ^ Stand the vacuum cleaner vertically. ^ Unfold the wand bracket and hang iton the handle of the vacuum. The wand bracket can be turned tohang off either side of...

Suction level indicator This indicates when the dustbag needsto be changed. ^ Set the suction power selector ( ifpresent) to the highest setting andmake sure the air inlet valve isclosed. ^ Hold the wand, with the floorbrushattached, off the floor. Turn on thevacuum and check if the red markercomple...

When to replace the dustbagand filters Dustbag Change the dustbag when the redmarker in the dustbag change indicatorfills the display. Exhaust filter (SUPER air clean) A "SUPER air clean filter" is includedwith each box of Miele dustbags andshould be changed when starting anew box of dustbag...

, Always turn off and unplug the vacuum cleaner before performingmaintenance or cleaning. Changing the dustbag ^ Open the dust compartment lid bypressing the release button and rais-ing the lid until it clicks into place. ^ Grasp the card collar by the twofinger holes and pull it out from thedustbag...

Changing the filters Exhaust filter (SUPER air clean) The "SUPER air clean filter" is a finefilter capable of trapping microscopicdust particles. ^ Open the dust compartment lid. ^ Open the filter frame and remove theused "SUPER air clean filter". ^ Insert the new "SUPER air clea...

Changing the thread catcher The thread catcher pads on the bottomof the rug and floor tool should bechecked occasionally. Replace thepads if they appear worn. ^ Use a screwdriver as shown toremove the thread catcher from theslot. ^ Press the new thread catcher into theslot. New thread catcher pads m...

, Always turn off the vacuum and unplug it from the outlet beforeperforming maintenance or a repair. Vacuum cleaner andaccessories The external surfaces of the vacuumcleaner and of the accessories can becleaned with a slightly damp cloth orwith a cleaner suitable for plastic. , Do not use abrasive, ...

What if the vacuum cleaner turns off while vacuuming? Possible fault Fix The vacuum has overheated. Thetemperature limiter switched off thevacuum automatically. Turn off the vacuum at the On / Offswitch.Check the telescopic wand and thesuction hose for blockages.Replace the dustbag or filters ifnece...

In the event of a fault which you can notcorrect, please contact: – Your Miele Dealer or – The Miele Technical Service Department USA 1-800-999-1360 [email protected] CDN 1-800-565-6435 [email protected] When contacting the Technical ServiceDepartment, please quote your vacuummodel number. The mo...

Turbobrush Recommended for cleaning crushedpile on low nap rugs or carpets.The turbobrush is mechanically drivenby the suction power of the vacuum. Noelectrical connection or electrical hoseis necessary. Hand Turbobrush The hand Turbobrush is intended forvacuuming upholstery, mattresses, carseats, c...