Miele KM 92-2 - Manuals

Help protect our environment Disposal of packaging The transport and protective packing ismostly manufactured from the followingre-usable materials: . . . Corrugated paper / cardboard - mostly from recycled materials. . . . Polyethylene foil (PE) - partly from secondary raw materials. Rather than th...

Warning and Safety Instructions Warning: When using your cooktop, followbasic safety precautions includingthe following: Read all instructions before usingthe cooktop. Use the cooktop only for its in-tended purpose. Be sure your appliance is properlyinstalled and grounded by a quali- fied technician...

Warning and Safety Instructions Use pots and pans that are thesame size as the cooktop heating elements. When high settings are used, re-main near the cooktop in case splattering grease or liquid boil overscause smoke. Only use dry potholders. Only use cookware suitable forrange-top service. Unsuita...

Before using for the first time Read the ”Warning and Safety In-structions“ before using for the firsttime. Heat the burners for approx. 5 minutesat the highest setting without a pot inplace, to harden the protective coating. Before using for the first time 8

Cooktop controls By using the individual burner controlknobs, temperatures can be freely se-lected. The controls can be turned either clock-wise or counter clockwise. The indicator lamp for each burnerlights as soon as the respective controlknob is turned to a setting. It will go out when the contol...

Burner description Safety thermostat All burners are equipped with safetythermostats that prevent them fromoverheating. The thermostats may trip . . . if unsuitable cooking pots are used. For example, pots with uneven basesor which are too small. . . . when burners are used without a pot or pan. Bur...

Burner operation Place a pan on the burner beforeturning on the appliance. This willprotect the burner and save energy. The surface of the burner and the baseof the pan should be clean and dry. Turning on the burners Turn the control knob to the maximumsetting for 1-2 minutes to allow the bur-ners t...

Cleaning and care To prevent spills from burning on to thecooktop, clean the burners and cook-top surface immediately in the event ofa spill. Burners Make sure no moisture or soil pene-trates inside the burners. Wipe off anyspilt food with a damp cloth once theburners have cooled. Use a plasticscour...

Problem solving guide Repairs to electrical appliancesshould only be performed by atrained technician. Unauthorized re-pairs could be dangerous. Some minor problems, can be resolvedas follows: What to do if . . . . . . a resistance is felt between set-tings 7 and 8? This is normal. The resistance is...

After Sales Service In the event of problems you cannotcorrect yourself, please contact: Your Miele Dealer or The Miele Service Department Space for supplied data plate. The address of the nearest Service De-partment is given on the back page. When contacting the Service Depart-ment, please quote th...

Electrical connection Electrical connection of the ap-pliance should be made by a quali-fied electrician in accordance withall local and national ordinances. Note to the installer:Please leave these instructions withthe consumer. Power supply:Please check the dataplate for240 VAC; 60 Hz or208 VAC; 6...

Electrical connection FOR CANADA ONLY WARNING: THE APPLIANCE MUSTBE GROUNDED Miele Fuse Box Cap Fuse Holder Electrical connection 17

Appliance dimensions KM 82-2 Measurement Conversion Table mm inches 490 19 5/16 265 10 7/16 560 22 1/16 510 20 1/16 288 11 3/8 580 22 13/16 55 2 3/16 KM 92-2 Appliance dimensions 18

Installation instructions The cooktop may be installed as shownabove.Do not surround the cooktop with cabi-netry, as this presents a fire hazard. There must be a minimum distanceof 1-3/16" (30 mm) between thecombiset and adjacent cabinets, be-cause of the heat radiated from theelements. Prepare ...