Miele KM 7699 FR - Manuals

Warning and Safety instructions 7 Correct application  This hob is intended for domestic use and use in other similar en- vironments.  This hob is not intended for outdoor use.  It is intended for domestic use only to cook food and keep it warm. Any other use is not supported by the manufacturer ...

Warning and Safety instructions 8 Safety with children  Children under 8 years of age must be kept away from the hob unless they are constantly supervised.  Children over 8 years of age may use the hob without supervision if its operation has been clearly explained to them and they are ableto use ...

Warning and Safety instructions 9 Technical safety  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re-pairs must only be carried out by a Miele authorised technician.  Damage to the hob can compromise your safety. Check ...

Warning and Safety instructions 11  If the hob is installed behind a cabinet door, do not close the door while the hob is in use. Heat and moisture can build up behind theclosed door. This can result in damage to the hob, the housing unitand the floor. Do not close the door until the residual heat ...

Warning and Safety instructions 12 Correct use  The hob gets hot when in use and remains hot for a while after be- ing switched off. There is a danger of burning until the residual heatindicators go out.  Oil and fat can overheat and catch fire. Do not leave the hob unat- tended when cooking with ...

Warning and Safety instructions 15 Cleaning and care  Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short cir-cuit.  If the hob is built in over a pyrolytic oven, the hob should not be used whilst the pyrolytic process is being car...

Caring for the environment 16 Disposal of the packing mater-ial The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Recycling the packaging re...

Guide to the appliance 17 Hob KM 7679 FR, KM 7679 FL, KM 7879 FL c a b e d Induction TempControl a Cooking zone with TwinBooster and TempControl* b Cooking zone with TwinBooster c PowerFlex cooking zone with TwinBoostercan be combined with PowerFlex cooking zone  to form PowerFlex cooking area d Po...

Guide to the appliance 20 Controls and display b d f h g a p o l k j r s n q i m c e Sensor controls a Hob On/Off b Stop & GoTo stop/start a cooking process in progress c Minute minder d Wipe protectionTo lock the sensor controls e Auto switch offSwitches the cooking zones off automatically f Ke...

Guide to the appliance 21 l Frying level III(only for cooking zones with TempControl) m CookAssist(only for cooking zones with TempControl)For enabling CookAssist actions n PowerFlex cooking zonesFor manual connection/disconnection of PowerFlex cooking zones Displays/indicator lights o Residual heat...

Guide to the appliance 22 Cooking zones KM 7679 FR, KM 7679 FL, KM 7879 FL Cooking zone Size in cm Max. rating in watts for 230 V 3 Linked cooking zone 4 Ø 1  2  16–22 – NormalTwinBooster, level 1TwinBooster, level 2 230030003650   10–16 – NormalTwinBooster, level 1TwinBooster, level 2 140017002...

Before using for the first time 25  Please stick the extra data plate forthe appliance supplied with this doc-umentation in the space provided inthe “After sales service” section ofthis booklet.  Remove any protective wrapping andstickers. Cleaning the hob for the firsttime  Before using for the ...

Before using for the first time 26 Miele@home Prerequisite: home WiFi network Your hob is equipped with an integratedWiFi module. The hob can be connec-ted to your home WiFi network. If your Miele cooker hood is also con-nected to the home WiFi network, youcan control the cooker hood automatic-ally ...

Before using for the first time 27 Setting up Miele@home Connecting via the app The Miele app can be used to connectto your network.  Install the Miele app on your mobiledevice. To connect, you will need: 1. Your WiFi network password 2. The password for your hob The password for your hob consists ...

Before using for the first time 28 Cancelling the process  Touch any sensor control. Resetting settings Resetting is not required when repla-cing the router.  Switch the hob on.  Touch the 0 sensor control on any ofthe numerical displays.  Touch the 0 and 9 sensor controls atthe same time for 6 ...

How it works 31 An induction coil is located under eachinduction cooking zone. The coil cre-ates a magnetic field that reacts directlywith the base of the pan and heats itup. The cooking zone itself is heated upindirectly by the heat given off by thepan. An induction cooking zone only workswhen cook...

How it works 32 Power management The hob has a maximum total permittedpower consumption which cannot beexceeded for safety reasons. Cooking zones can be linked togetherin pairs on the hob. This allows addi-tional power to be transferred from onecooking zone to another. The previously set setting has...

Pans 33 Suitable pans - stainless steel pans with a magnetic base - enamelled steel pans - cast iron pans Please be aware that the properties ofthe pan base can affect the evennesswith which the food heats up (e.g. whenmaking pancakes). The base of the panmust be able to distribute the heatevenly. A...

Pans 34 Tips - To make optimum use of the cooking zones, choose cookware with a suit-able base diameter (see “Overview –Cooking zone data”). If the pan is toosmall it will not be recognised. - Position the cookware as centrally as possible on the relevant cookingzone/cooking area. - Use only pots an...

Tips on saving energy 35 - Use a lid whenever possible to min- imise heat loss. - Select a smaller pan when cooking small quantities. A smaller pan usesless energy than a larger pan withvery little in it. - Cook with as little water as possible. - Once food has come to the boil or the oil in the pan...

Operation 37 Using the appliance This ceramic hob is equipped with elec-tronic sensor controls which react tofinger contact. For safety reasons, in or-der to switch the appliance on, the On/Off   sensor needs to be touched for a little longer than the other sensors.Each time a sensor control is act...

Operation 38  Risk of fire with overheated food. Unattended food can overheat andcatch alight.Do not leave the hob unattendedwhilst it is being used. Please note that the heating up timeon induction hobs is very muchshorter than on conventional hobs. Switching on the hob  Touch the   sensor. Othe...

Operation 39 TempControl TempControl is used to obtain andmaintain the ideal temperature for thefood being cooked so that the powerlevels do not need to be adjustedmanually. A sensor under the cookingzone measures the temperature underthe ceramic glass and the pan. Thesensor regulates the cooking zo...

Operation 40 Activating TempControl  Place a pan on the cooking zone andadd frying fat/oil if necessary.  Touch the sensor control for the fry-ing level you want to use (  ,,  ). The sensor control for the frying levelselected will start to pulsate. Once the pre-set temperature for thefrying le...

Operation 41 Frying assistant cooking table Simmer setting   For reducing sauces Frying level   Fried eggs, scrambled eggs Frozen meat, e.g. Cordon bleu Chicken breast Frozen spring rolls Frozen fish fingers Fish fillet/whole fish Kebabs Vegetables in butter (mushrooms, garlic) Schupfnudeln (potat...

Operation 43 PowerFlex cooking area The PowerFlex cooking zones combineautomatically to form a PowerFlexcooking area when you place suffi-ciently large items of cookware on them(see “Guide to the appliance – Hob”).Settings for the linked cooking area arecontrolled by the numerical display ofthe fron...

Operation 44 Auto heat-up When Auto heat-up has been activated,the cooking zone switches on automat-ically at the highest setting and thenswitches to the continued cooking set-ting which you have previously selec-ted. The heat-up time depends onwhich continued cooking setting hasbeen chosen (see cha...

Operation 45 Booster function The cooking zones are equipped with aTwinBooster. When the Booster function is activated,the power is boosted so that largequantities can be heated up quickly,e.g. when boiling water for cookingpasta. The boost in power is active for amaximum of 15 minutes. When the Boo...

Operation 46 Keeping warm/Warming food The Keeping warm   function is for keeping food warm when it has justbeen cooked and is still hot. It is not forreheating food that has gone cold. The Keeping warm Plus   function (only for TempControl cooking zones) isfor keeping food warm and for warmingup ...

Operation 47 Enabling CookAssist actions Requirements: - Mobile device with latest version of the Miele app (see “Before us-ing for the first time –Miele@home”) - Hob must be connected to Miele@home If there is no action in the app that iswaiting to be confirmed on the hob,the sensor control will no...

Timer 48 The hob has to be switched on if youwant to use the timer. The timer can be used for the following2 functions: - For setting the minute minder - For automatically switching a cooking zone off You can use the functions simultan-eously. A duration of between 1 minute ( : ) and 9 hours 59 m...

Timer 49 Auto switch off You can set a time after which a cook-ing zone will switch off automatically.This function can be used for all cook-ing zones at the same time. If the time programmed is longer thanthe maximum operating time allowed,the cooking zone will be switched offby the safety switch-o...

Timer 50 Using both timer functions atthe same time If you use both functions simultan-eously, the shortest time is always dis-played. The   sensor control (minute minder) or the   sensor control (auto switch off) of the cooking zone with theshortest time pulsates.  Touch the   or    sensor con...

Additional functions 51 Stop & Go When Stop & Go is activated, the powerof all cooking zones in use is reduced topower level 1.The cooking zone power levels and thetimer settings cannot be altered; thehob can only be switched off. Theminute minder, switch-off, booster andAutoBoost times cont...

Additional functions 52 Wipe protection The hob sensors can be locked for20 s in order, for example, to removesoiling. The   is not locked. Activating  Touch the   sensor. The time will count down in the timerdisplay. Deactivating  Touch the   sensor until the timer display goes out. Demonstrat...

Safety features 53 System lock/safety lock Your hob is equipped with a systemlock and a safety lock to prevent thehob and the cooking zones beingswitched on or any settings beingaltered by mistake. The system lock is activated when the hob is switched off. If the system lock isactivated, the hob can...

Safety features 54 Safety switch-off Sensor controls are covered Your hob will turn off automatically ifone or several of the sensors remaincovered for longer than 10 seconds, forexample, by finger contact, food boilingover or by an object such as an ovenglove or tea towel.  flashes briefly above t...

Safety features 55 Overheating protection All the induction coils and heat sinks forthe electronic module are fitted with anoverheating protection mechanism. Be-fore the induction coils or heat sinks gettoo hot, the overheating protectionmechanism intervenes in one of the fol-lowing ways: Induction ...

Programming 56 You can adapt the programming of thehob to your personal needs. Severalsettings can be altered in succession. After accessing programming mode,the   symbol appears and  will ap- pear in the timer display. After a fewseconds : (Programme 01) will flash alternately with : (Code...

Note for test institutes 61 Test food acc. to EN 60350-2 9 power levels are programmed at the factory. For testing in accordance with the above standard, programme the hob to the ex-tended power level setting. Test food  Pan base (mm) Lid Power level Pre-heat Cooking Heating oil up 150 No – 1–2 Pan...

Cleaning and care 62  Risk of burning due to hot cook- ing zones.The cooking zones will be hot afteruse.Switch the hob off.Allow the cooking zones to cooldown before cleaning the hob.  Risk of damage due to moisture ingress.The steam from a steam cleaning ap-pliance could reach live electricalcomp...

Cleaning and care 63 Cleaning the ceramic surface  Risk of damage by pointed ob- jects.The seal between the hob and theworktop could suffer damage.The seal between the ceramic sur-face and the frame could suffer dam-age.Do not use pointed objects for clean-ing. Not all soiling and residues can bere...

Problem solving guide 64 Many malfunctions and faults that can occur in daily operation can be easilyremedied. Time and money will be saved because a service call will not beneeded. The following guide may help you to find the reason for a malfunction or a fault,and to correct it. Messages in the di...

Problem solving guide 66 Unexpected behaviour Problem Cause and remedy The power level selec-ted is flashing. There is no pan on the cooking zone, or the pan isunsuitable.  Use suitable pans (see “Induction - Pans”). Power level 9 is auto-matically reduced if youalso set power level 9for the connec...

Problem solving guide 67 General problems or technical faults Problem Cause and remedy The hob or cookingzones will not switchon. There is no power to the hob.  Check whether the mains fuse has tripped. Con-tact an electrician or Miele Service (for the min-imum fuse rating, see data plate). There m...

Optional accessories 68 Miele offer a comprehensive range ofuseful accessories as well as cleaningand conditioning products for yourMiele appliances. These products can be ordered throughthe Miele Webshop. They can also be ordered from Miele(see end of this booklet for contact de-tails) or from your...

After sales service 69 Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact yourMiele dealer or the Miele Customer Service Department. You can book a Miele Customer Service Department call-out online atwww.miele.com/service. Contact information ...

Installation *INSTALLATION* 70 Safety instructions for installation  Risk of damage from incorrect connection. Incorrect installation can cause damage to the hob.The hob must only be installed by a qualified person.  Risk of electric shock from mains voltage. Incorrect connection to the mains supp...

Installation *INSTALLATION* 71 Safety distances Safety distance above the hob The safety distance specified by themanufacturer of the cooker hood mustbe maintained between the hob and thecooker hood above it. If combustible objects are installedabove the hob (e.g., cabinets, utensilrail, etc.), a mi...

Installation *INSTALLATION* 72 Safety distances to the sides andback of the appliance It is advisable to install the hob withplenty of space either side of it. The minimum distance  shown below must be maintained between the backof the hob and a tall unit or wall. The minimum distance ,  shown be...

Installation *INSTALLATION* 73 Minimum safety distance underneaththe hob To ensure sufficient ventilation to thehob, a minimum safety distance mustbe left between the underside of thehob and any oven, intermediate shelf ordrawer. The minimum safety distance betweenthe underside of the hob and - Uppe...

Installation *INSTALLATION* 74 Safety distance when installing the appliance near a wall with additionalniche cladding A minimum safety distance must be maintained between the worktop cut-out andany niche cladding to protect it from heat damage. If the niche cladding is made from a combustible mater...

Installation *INSTALLATION* 75 Installation notes Surface-mounted installation Seal between the hob and the work-top  Damage caused by incorrect in- stallation.Using sealant under the hob couldresult in damage to the hob and theworktop if the hob ever needs to beremoved for servicing.Do not use sea...

Installation *INSTALLATION* 76 Flush-fit installation A flush-fit hob is suitable only for in-stallation in natural stone (granite,marble), solid wood and tiled work-tops. Certain models are also suitablefor building into glass worktops –these are marked with an appropriatenote in “Installation – In...

Installation *INSTALLATION* 77 Installation dimensions – Surface-mounted All dimensions are given in mm. KM 7679 FR a Front b Mains connection boxThe mains connection cable (L = 1440 mm) is supplied loose

Installation *INSTALLATION* 78 KM 7689 FL a Front b Mains connection boxThe mains connection cable (L = 1440 mm) is supplied loose

Installation *INSTALLATION* 82 Surface-mounted installation  Create the worktop cut-out. Remem-ber to maintain the minimum safetydistances (see “Installation – Safetydistances”).  Seal any cut surfaces on wooden worktops with a special varnish, sil- icone sealant or resin to prevent thewood from s...

Installation *INSTALLATION* 83 Installation dimensions – Flush-fit All dimensions are given in mm. KM 7629 FX a Front b Mains connection boxThe mains connection cable (L = 1440 mm) is supplied loose c Stepped cut-out, natural stone worktop d Wooden batten 12 mm (not supplied)

Installation *INSTALLATION* 87 Flush-fit installation  Create the worktop cut-out. Remem-ber to maintain the minimum safetydistances (see “Safety distances”).  Solid wood, tiled and glass worktops:Fix a wooden frame 5.5 mm belowthe top edge of the worktop.  Risk of damage from incorrect connectio...

Installation *INSTALLATION* 88 Electrical connection  Risk of damage from incorrect connection.Unauthorised installation, mainten-ance and repairs can cause consid-erable danger for the user.Miele cannot be held liable for dam-age or injury caused by unauthorisedinstallation, maintenance or repairw...

Installation *INSTALLATION* 89 Disconnecting from the mains  Risk of electric shock. There is a risk of electric shock if theappliance is connected to the mainssupply during repair or service work.After disconnection, ensure the ap-pliance cannot be switched back onby mistake. To disconnect the app...

Installation *INSTALLATION* 90 Wiring diagram Some connection methods are notpermitted in all installation locations.Ensure compliance with national reg-ulations and any additional regula-tions issued by the local electricityprovider. L1 200-240 V~ 200-240 V~ 200-240 V~ a b c d e - L2 L3 N - L2 b L1...

Product data sheets 91 The following data sheets apply to the models described in this operating instruc-tion manual. Information for domestic electric hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name/identifier KM 7629 Number of cooking zones and/or areas 5 For circular cooking zones:...

UK Conformity declaration 94 Miele hereby declares that this ceramicinduction hob complies with UK RadioEquipment Regulations 2017, asamended. The complete text of the UK declarationof conformity is available from one ofthe following internet addresses: - Products, Download from www.miele.co.uk - Fo...

United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TWTel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: [email protected] Australia Miele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 398Level 4, 141 Camberwell RoadHawthorn East, VIC 3123Tel: 1300 464 353Int...