Miele KM 3054 - Manuals

Accessories supplied The accessories supplied with your appliance as well as arange of optional ones are available to order from Miele (see"Optional accessories"). Wok ring The Wok ring supplied with your appliance can be used ininstances where extra stability is required. It is particularly...

Minute minder display a Lock/Timer b Sensor switch:- Select minute minder- Switch between timer functions- Select cooking zone c Indicator lamp for minute minder d Indicator lamp for relevant zone, e.g. back right-hand cooking zone e Timer display 00 to 99 = Time in minutes 0.^ to 6.^ = Time in hour...

Burner Wok burner a Outer burner cap b Inner burner cap c Burner head d Burner base e Ignition safety device f Ignitor Small, medium and large burners a Burner cap b Burner head c Burner base d Ignition safety device e Ignitor Description of the appliance 10

This appliance complies with all relevant local and national safetyrequirements. Inappropriate use can, however, lead to personalinjury and damage to property. To avoid the risk of accidents and damage to the appliance,please read these instructions carefully before installation andbefore using it f...

Safety with children ~ Activate the safety lock to ensure that children cannot switch on the appliance inadvertently. ~ This appliance is not a toy! To prevent the risk of injury, do not allow children to play with the appliance or its controls. ~ Children under 8 years of age must be kept away from...

Technical safety ~ Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance. A damagedappliance may be dangerous. ~ The electrical safety of this appliance can only be guaranteed if correctly earthed. It is most important that this basic safety...

~ Do not connect the appliance to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guaranteethe required safety of the appliance (e.g. danger of overheating). ~ Do not use the hob if if it is faulty, or if the ceramic surface is cracked, chipped or damaged in...

Disposal of the packingmaterial The transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and should be recycled. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of babies andyoung children. Danger...

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate" section of this booklet. Cleaning for the first time ^ Remove any protective foil. ^ Clean all removable parts of the burners with a solution ofwa...

Rapid ignition system The appliance has a rapid ignition system with the followingfeatures: – Rapid ignition without pressing and holding the control dial – Automatic re-ignition If the flame is extinguished by a draught, etc. the burner isautomatically reignited. If reignition is unsuccessful, theg...

Switching on When using the gas hob an extractor hood or a ventilationdevice must be used. ^ The control for the burner required must be pressed in andturned anti-clockwise to the largest flame symbol to switchon. The ignitor will make a clicking sound and ignite thegas. When a control is operated, ...

Easy switch-off function All active cooking zones can be switched off by touching theeasy switch-off sensor f . ^ Touch the f sensor. The in-operation/residual heat indicators for active cookingzones will flash. A minute-minder time set will continue to run down, if it is notallocated to a specific ...

You can select a time from 1 minute ( 01 ) to 6 hours ( 6^ ). If a time of more than 99 minutes ( 99 ) is set, the time is set in half-hour steps. The half hour is indicated by a dot after thenumber. Use the - sensor to reduce the time from 6.^ to 00 , and the + sensor to increase the time from 00 t...

Allocating the minute minder to a specific cooking zone You can set the minute minder for any active cooking zone.All cooking zones can be programmed at the same time. ^ Switch on the desired cooking zone. ^ Touch the m sensor. 00 and the minute minder indicator lamp will flash in the timer display....

Burner Min. pan base diameter in cm Small burnerMedium burnerLarge burnerWok burner 10121414 Max. diameter at top of pan in cm Small burnerMedium burnerLarge burnerWok burner 20222426 – Refer to the chart above and ensure that the pan diameter falls within the minimum and maximum diameters given for...

Combi insert The combi insert must be utilised when using pans with a base diameter of less than the minimum given in the tableabove. The combi insert ensures that the pan will sit securelyon the hob, and cannot tip up. Wok ring The Wok ring supplied with your appliance can be used ininstances where...

– Use a pan lid whenever possible to minimise heat loss. – Cook with as little water as possible. – Cooking times are greatly reduced when using a pressure cooker. – Turn the flame down promptly to a lower setting when the pan has come to the boil. – Wide, shallow pans are preferable to tall, narrow...

Thermo-electric ignition This appliance is has a thermo-electric ignition safety device.If the flame goes out, for example if food has boiled over or ifthere is a sudden draught, and automatic re-ignition hasbeen unsuccessful, the supply of gas to the burner will be cutoff preventing any further esc...

, Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical componentsand cause a short circuit. – The appliance should be cleaned after each use. Allow the appliance to cool down to a safe temperature beforecleaning. – To avoid water marks and limescale deposit...

To assemble the small, medium and large burners ^ Place the burner head b on to the burner base c so that the ignition safety device d and the ignitor e extend through their respective holes in the burner head. Theburner head must click into place correctly. ^ Place burner cap a flat over burner hea...

To assemble the wok burner ^ Place burner head c onto burner base d so that the ignition safety device e and the ignitor f extend through their respective holes in the burner head. The burner headmust click into place correctly. ^ Place the burner caps a and b in position. Important: replace parts i...

With the help of the following notes, minor faults in theperformance of the appliance, some of which may result fromincorrect operation can be put right without contacting theService Department. saving you both time and money. The following guide may help you to find the reason for afault, and to co...

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for yourappliance. These products can be ordered online: or from Miele (see back cover for contact details) Ceramic and stainless steel hob cleaner250 ml Removes heavy soiling, limescale deposits and...

Fit the wall units and extractor hoodbefore fitting the hob to avoiddamaging the surface. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units)must be treated with 100 °Cheat-resistant adhesive which will notdissolve or distort.Any backmoulds must be ofheat-resistant material. ~ ...

Safety distance above the appliance A minimum safety distance must bemaintained between the appliance andthe cooker hood above it. See thecooker hood manufacturer's operatingand installation instructions for details.If the manufacturer's instructions arenot available for the cooker hood, aminimum sa...

KM 3034 a Front b Casing depth c Casing depth including mains connection box d Gas connection R 1/2 - ISO 7-1 (DIN 10226) Building-in dimensions 42

^ Make the worktop cut-out accordingto the dimensions given in thebuilding-in dimension diagram.Remember to maintain the minimum safety distances (see "Safety instructions for installation"). ^ Seal the cut surfaces onwood/laminated worktops with asuitable heat-resistant sealant toavoid swel...

Seal between appliance andworktop The sealing strip under the edge of thetop part of the appliance provides asufficient seal for the worktop. The appliance must not be sealedwith sealant (e.g. silicone).This could result in damage to theappliance or the worktop if theappliance ever needs to beremove...

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regulations (BS 7671in the UK). Installation, repairs and other workby unqualified persons could bedangerous. The manufacturercannot be held liable forunaut...

Important The electrical safety of this appliancecan only be guaranteed if correctlyearthed. It is most important that thisbasic safety requirement is observedand regularly tested and where there isany doubt, the electrical wiring in thehome should be tested by a qualifiedelectrician. The manufactur...

, Connection to the gas supply, or conversion from one type of gas toanother, should only be undertakenby an approved and registered gasinstaller in strict accordance withlocal and national safety andbuilding regulations (e.g. Gas Saferegistered in the UK). Every appliance should have its owneasily ...

Nominal rating KM 3034 / KM 3054 Burner Gas type High setting Low setting kW g/h kW Small burner Natural gas HLiquid gas 1.0 0.95 - 69 0.250.20 Medium burner Natural gas HLiquid gas 1.71.7 - 124 0.300.35 Large burner Natural gas HLiquid gas 2.7 2.55 - 186 0.500.60 Wok Natural gas HLiquid gas 4.74.6 ...

, Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by anapproved and registered gas installer in strict accordancewith local and national safety and building regulations(e.g. Gas Safe registered in the UK). When converting to a different type of ...

To change the small jets To change the small jets, the burner securing screws mustfirst be loosened and the upper section of the applianceremoved. ^ Pull the control knobs off. ^ Remove the cover (see illustration). ^ Lift the top of the appliance off. ^ Using a small screwdriver, unscrew small jet ...

Function test Check all gas fittings for leaks. ^ Reassemble the appliance. ^ Check the burner flame by operating the burner. The flame must not go out on the lowest setting, or whenthe control is turned quickly from a high to a low setting. On the highest setting, the flame must have a distinctivea...

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improveour service. When contacti...