Miele KM 2010 - Manuals

Warning and Safety instructions 6 This hob complies with all relevant local and national safety re-quirements. Inappropriate use can, however, lead to personal in-jury and material damage. Read the operating and installation instructions carefully beforeusing the hob. They contain important informat...

Warning and Safety instructions 7 Correct application  This hob is intended for domestic use and use in other similar en- vironments.  This hob is not intended for outdoor use.  It is intended for domestic use only to cook food and keep it warm. Any other use is not supported by the manufacturer ...

Warning and Safety instructions 8 Safety with children  Children under 8 years of age must be kept away from the hob unless they are constantly supervised.  Children over 8 years of age may use the hob without supervision if its operation has been clearly explained to them and they are ableto use ...

Warning and Safety instructions 9 Technical safety  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re-pairs must only be carried out by a Miele authorised technician.  Damage to the hob can compromise your safety. Check ...

Warning and Safety instructions 11  Danger of electric shock! Do not use the hob if it is damaged or if it suffers damage duringuse. Switch it off immediately. Disconnect it from the mains electri-city and gas supply. Call Service.  If the hob is installed behind a cabinet door, do not close the d...

Warning and Safety instructions 12 Correct use  The hob gets hot when in use and remains hot for some time after being switched off. Do not touch the hob if there is a possibility thatit could still be hot.  Due to the high temperatures radiated, objects left near the hob when it is in use could c...

Warning and Safety instructions 15 Cleaning and care  Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short cir-cuit.

Caring for the environment 16 Disposal of the packing mater-ial The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Recycling the packaging re...

Guide to the appliance 17 Hob KM 2010, KM 2011 a Large burner b Small burner c Medium burner d Medium burner Rotary controls for the burners e Front right f Rear right g Rear left h Front left

Guide to the appliance 22 Control knobs Symbol Description  Burner off, the gas supply is turned off  Largest flame  Smallest flame

Guide to the appliance 23 Burner Wok burner Small, medium and large burners a Burner ring (wok burner) b Burner cap c Burner head d Burner base e Thermocouple f Ignitor

Guide to the appliance 24 Accessories supplied The accessories supplied with your ap-pliance as well as a range of optionalones are available to order from Miele(see “Optional accessories”). Wok ring The wok ring supplied gives additionalstability to the wok, especially to wokswith a rounded base.

Before using for the first time 25  Please stick the extra data plate forthe appliance supplied with this doc-umentation in the space provided inthe “After sales service” section ofthis booklet.  Remove any protective wrapping andstickers. Cleaning the hob for the firsttime  Before using for the ...

Pans 26 Minimum pan base diameter Burner Ø  cm Small burner 10 Medium burner 12 Large burner 14 Wok burner 14 Maximum diameter at top of pan Burner Ø  cm Small burner 22 Medium burner 22 Large burner 24 Wok burner 24 - Select the pan to suit the size of the burner:large diameter = large burnersmall ...

Tips on saving energy 28 - Use a pan lid whenever possible to minimize heat loss. - Wide, shallow pans are preferable to tall, narrow ones. They will heat upfaster. - Cook with as little water as possible. - Reduce the size of the flame once the water has come to the boil or the oilis hot enough to ...

Operation 29  Risk of fire with overheated food. Unattended food can overheat andcatch alight.Do not leave the hob unattendedwhilst it is being used. Switching on  Press in the relevant rotary controland turn it anticlockwise to the largeflame symbol. The ignition electrodewill “click” and ignite ...

Operation 30 Adjusting the flame The burners can be regulated at anylevel between the strongest and weak-est flame. As the outer part of the flame is muchhotter than the centre, the tips of theflames should stay beneath the panbase. Flame tips which extend beyondthe sides of the pan merely warm upth...

Safety features 31 Thermo-electric flame failuremonitor Your hob is equipped with a thermo-electric flame failure monitor. If a gasflame is extinguished, e.g. by food boil-ing over or by a draught, the gas supplyis switched off. This prevents the re-lease of gas. If you turn the rotary con-trol to t...

Cleaning and care 32  Danger of burning due to hot surfaces.The hob surface, pan supports andburners will be hot after use.Allow the hob to cool down beforecleaning it.  Risk of damage due to moisture ingress.The steam from a steam cleaning ap-pliance could reach live electricalcomponents and caus...

Cleaning and care 33  The entire hob should be cleanedafter each use.  Soften any stubborn soiling before-hand.  Dry the hob thoroughly after everydamp cleaning to avoid limescaleresidue. Stainless steel trough  Risk of damage by pointed ob- jects.The seal between the hob and theworktop could su...

Cleaning and care 35 Assembling the small, medium andlarge burners  Place the burner head   onto the burner base   so that the thermo- couple   , the ignitor   and the re- taining pins   fit into their respective holes in the burner head.  Position the burner cap   onto the burner head   so...

Problem solving guide 36 Many malfunctions and faults that can occur in daily operation can be easilyremedied. Time and money will be saved because a service call will not beneeded. The following guide may help you to find the reason for a malfunction or a fault,and to correct it. Problem Cause and ...

Optional accessories 38 Miele offer a comprehensive range ofuseful accessories as well as cleaningand conditioning products for yourMiele appliances. These products can be ordered throughthe Miele Webshop. They can also be ordered from Miele(see end of this booklet for contact de-tails) or from your...

After sales service 39 Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact yourMiele dealer or the Miele Customer Service Department. You can book a Miele Customer Service Department call-out online atwww.miele.com/service. Contact information ...

Installation *INSTALLATION* 40 Safety instructions for installation  Risk of damage from incorrect connection. Incorrect installation can cause damage to the hob.The hob must only be installed by a qualified person.  Damage from falling objects. Take care not to damage the hob when fitting wall un...

Installation *INSTALLATION* 41 Safety distances Safety distance above the hob A minimum safety distance must bemaintained between the appliance andthe cooker hood above it. See thecooker hood manufacturer's operatingand installation instructions for details.If the manufacturer's instructions arenot ...

Installation *INSTALLATION* 42 Safety distances to the sides andback of the hob Ideally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear or a tall unit orwall on one side (right or left) (see illus- trations).   Minimum distance between the back of the ...

Installation *INSTALLATION* 43 Safety distance when installing the appliance near a wall with additionalniche cladding A minimum safety distance must be maintained between the worktop cut-out andany niche cladding to protect it from heat damage. If the niche cladding is made from a combustible mater...

Installation *INSTALLATION* 44 Installation notes Seal between the hob and the work-top  Damage caused by incorrect in- stallation.Using sealant under the hob couldresult in damage to the hob and theworktop if the hob ever needs to beremoved for servicing.Do not use sealant between the hoband the w...

Installation *INSTALLATION* 45 Building-in dimensions All dimensions are given in mm. KM 2010, KM 2011, KM 2012, KM 2013 520 35 650 c b 243 75 54 196 c 0 50 0 30 560 480 - 490 + - 1 d a 2 1 7 ß R4 15 a Front b Casing depth c Gas connection R ¹/₂ – ISO 7-1 (DIN EN 10226) d Mains connection box with m...

Installation *INSTALLATION* 46 KM 2030 520 35 750 b 0 50 560 480 - 490 - + 1 c ß R4 15 243 75 54 196 d a 2 1 7 c 0 30 a Front b Casing depth c Gas connection R ¹/₂ - ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2000 mm

Installation *INSTALLATION* 49 Installation Preparing the worktop  Create the worktop cut-out as shownin the hob diagram. Remember tomaintain the minimum safety dis-tances (see “Installation – Safety dis-tances”).  Seal any cut surfaces on woodenworktops with a special varnish, silic-one sealant o...

Installation *INSTALLATION* 50 Securing the hob  Secure the hob using the brackets   supplied. Functional check  After installing the hob, ignite allburners to check that they are operat-ing correctly: - The flame must not go out on the lowest setting, or when the control isturned quickly from th...

Installation *INSTALLATION* 51 Gas connection For any gas work in the UK alwaysuse a Gas Safe registered engineer.  Risk of explosion due to an in- correct gas connection.If the gas connection is carried outincorrectly, it may result in gas leak-age.Connection to the gas supply mustonly be undertak...

Installation *INSTALLATION* 52  Risk of heat damage. Gas connections, pipes and connec-tion cables can suffer damage if ex-posed to heat from the hob.After installation make sure thatneither the gas pipe nor the mainscable can come into contact with hotparts of the appliance and that thegas pipe an...

Installation *INSTALLATION* 53 Connecting the hob The hob is supplied with a conical ¹/₂"gas connection point. There are twoconnection options: - Fixed connection - Flexible connection in accordance with DIN 3383 Part 1, maximumlength 2000  mm. (Not for the UK.)  Risk of explosion due to gas le...

Installation *INSTALLATION* 54 Burner ratings Nominal ratings for KM 2010, KM 2011 Burner Gas type Highest setting Lowest setting kW g/h kW Small burner Natural gas HLiquid gas 1.01.0 – 73 0.250.25 Medium burner Natural gas HLiquid gas 1.751.75 – 127 0.350.35 Large burner Natural gas HLiquid gas 2.6...

Installation *INSTALLATION* 55 Nominal ratings for KM 2032, KM 2033, KM 2050, KM 2051 Burner Gas type Highest setting Lowest setting kW g/h kW Small burner Natural gas HLiquid gas 1.01.0 – 73 0.250.25 Medium burner Natural gas HLiquid gas 1.751.75 – 127 0.350.35 Large burner Natural gas HLiquid gas ...

Installation *INSTALLATION* 56 Electrical connection All electrical work must be carried outby a suitably qualified and competentperson in strict accordance with currentlocal and national safety regulations (BS7671 in the UK). Connection must bemade via a switched socket. This willmake it easier for...

Installation *INSTALLATION* 57 Disconnecting from the mains  Risk of electric shock. There is a risk of electric shock if theappliance is connected to the mainssupply during repair or service work.After disconnection, ensure the ap-pliance cannot be switched back onby mistake. To disconnect the app...

Converting to another gas type *INSTALLATION* 58  Risk of explosion due to an in- correct conversion.If the conversion to another type ofgas is carried out incorrectly, it mayresult in gas leakage.Conversion from one type of gas toanother must only be undertaken byan approved and registered gas in-...

Converting to another gas type *INSTALLATION* 59 Changing the jets  Disconnect the hob from the electri-city supply and turn off the gas sup-ply. Changing the main jets Small, medium and large burnersThe burner cap   is locked on these burners. You must turn it clockwise oranti-clockwise to remove...

Converting to another gas type *INSTALLATION* 60 Changing the small jets To change the small jets, the burnerfixing screws must first be loosenedand the upper section of the applianceremoved.  Pull the control knobs off.  Remove the burner components.  Undo the screws.  Lift the top of the appli...

Converting to another gas type *INSTALLATION* 61 Functional check  Check all gas fittings for leaks.  Reassemble the hob.  Ignite all burners to check that theyare operating correctly. - The flame must not go out on the lowest setting, or when the control isturned quickly from the highest to thel...

Product data sheets 62 The following data sheets apply to the models described in this operating instruc-tion manual. Information for domestic gas-fired hobs In acc. with regulation (EU) No. 66/2014 MIELE Model name / identifier KM 2010 Number of gas burners 4 Energy efficiency per gas burner (EE ga...