Miele G600 - Manuals

Technical Information G600 & G800 Electronic Dishwashers G600 &G800 Electronic Dishwashers – List of Figures (continued) 5-11: Exterior view of the Inner Door Panel.................................................64 5-12: Fan Removal..............................................................

Technical Information G600 & G800 Electronic Dishwashers G600 &G800 Electronic Dishwashers – List of Tables 1-1: Summary of Dimensions ......................................................................15 4-1: Detergent Quantity in Combination Dispensers. ....................................

Technical Information G600 & G800 Electronic Dishwashers 1.0 Construction and Design 1.1 Appliance Overview 1.1.1 Appliance Overview – Typical Integrated Model Figure 1-1: Appliance Overview - Typical Integrated Model 9

Technical Information G600 & G800 Electronic Dishwashers 1.1.2 Unit Overview – Typical Fully Integrated Model Figure 1-2: Appliance Overview – Typical Fully Integrated (Vi) Model 10

Technical Information G600 & G800 Electronic Dishwashers 1.2 Controls Overview Miele dishwashers are currently categorized into three (3) product series, based on the type of controls. Novotronic Each Novotronic model dishwasher can be operated with a single knob. Surface mounted design technolo...

Technical Information G600 & G800 Electronic Dishwashers Incognito The Incognito (fully integrated) series dishwashers have the program controls located on the top edge of the door; and are accessed while the door is open. Neither seen nor heard, the Miele Incognito Series OCI (Optical Cycle Ind...

Technical Information G600 & G800 Electronic Dishwashers 1.3 Types of Dishwashers Pre-Finished : The pre-finished construction consist of a pre-assembled door panel and control panel; making it an ideal replacement unit. Available in white, black or stainless steel. Figure 1-3: Pre-Finished Dish...

Technical Information G600 & G800 Electronic Dishwashers 1.4 Technical Data 1.4.1 Dishwasher Width – Fullsize / Slimline Figure 1-6: Dishwasher Widths 1.4.2 Dishwasher Height – 600 / 800 Series 23 ½ in. 17 ½ in. 32 1/4 to 34 7/8” 33 1/8 to 35” Figure 1-7: Dishwasher Heights 14

Technical Information G600 & G800 Electronic Dishwashers 1.4.3 Summary of Dimensions FULLSIZE G600 Series G800 Series Height 32 ¼” - 34 7 / 8 ” 33 1 / 8 ”- 35” Width of Machine 23 1 / 2 ” 23 1 / 2 ” Width of Opening 23 5 / 8 ” 23 5 / 8 ” Depth 22 ½” 22 ½” Depth w/ door open 45 ½” 47 ½” SLIMLINE ...

Technical Information G600 & G800 Electronic Dishwashers 1.4.5 Hard Wire Electrical Connection Connections: L1 (Black) to L on terminal block, N (White) to N on terminal block, GND To ground connector. ƒ Hard wiring the dishwasher should only be done if required by electrical code. ƒ Do not cut ...

Technical Information G600 & G800 Electronic Dishwashers 1.5 Data Tag The Data Tag is located on the top edge of the door or on the right side edge of the door (fully integrated models) - as shown. ETL Certification –OR- Figure 1-8: Data Tag Locations and Information 17

Technical Information G600 & G800 Electronic Dishwashers 1.6 Layout of Components 1.6.1 Novotronic and Touchtronic Series 1 Temperature Limiter 90°C, 3F2. (before 8/99) 2 Interference Suppression Capacitor, Z2 3 Capacitor - Circulation Pump, C6 4 Rinse Aid Dispenser, Y50 5 Detergent Dispensert, ...

Technical Information G600 & G800 Electronic Dishwashers 1.6.2 Incognito Series 1 Temperature Sensor, R30 2 Float Switch, B8/3 3 Level Switch - Heating, B1/10 4 Relay - Mains, 1K1/6 5 Relay - Heating, 1K1/1 6 Fan, M2 7 Interference Suppression Capacitor, Z2 8 Steam Condenser (not all models) 9 R...

Technical Information G600 & G800 Electronic Dishwashers 2.0 Installation Refer to the Appliance Installation Manual. 20

Technical Information G600 & G800 Electronic Dishwashers 3.0 Commission and Operation 3.1 Door Handle and Door Lock (Novotronic and Touchtronic Series) Press the release catch inside the Door Grip. Note If the door is opened during operation, the dishwasher will stop running. Once the door is cl...

Technical Information G600 & G800 Electronic Dishwashers 3.4 Water Softener If your tap water hardness is above 8 grains per gallon (140 ppm), the water should be softened. A Water Hardness Test Strip is used to determine the water hardness. If the Water Softener is needed: ƒ The dishwasher must...

Technical Information G600 & G800 Electronic Dishwashers 3.5 General Operation – Novotronic Series 1. Make sure the Spray Arms are not blocked. 2. Close the door. 3. Turn on the dishwasher. The "Start" Indicator will flash. 4. Select a wash program by turning the Program Selector to the ...

Technical Information G600 & G800 Electronic Dishwashers 4.0 Description of Function 4.1 Cabinet Construction The inner cabinet is constructed of stainless steel (1.4301) welded onto four (4) vertical U-section sub-frames. The cabinet is sound and heat-insulated with bitumen and/or mineral wool ...

Technical Information G600 & G800 Electronic Dishwashers 4.3 Combination Dispenser 4.3.1 Construction Two individual solenoids control detergent and rinse aid dispensing. The Rinse Aid Reservoir has a capacity of about 130 ml. When the Rinse Aid level drops to about 25 ml. the Magnetic Float act...

G600 & G800 Electronic Dishwashers Technical Information 26 4.3.2 Dispensing During the main wash, the Detergent Solenoid (Y51) is energized (120VAC), to open the Detergent Dispenser Flap. The water jet from the Middle Spray Arm flushes detergent out of the dispenser. Table 4-1: Detergent quanti...

Technical Information G600 & G800 Electronic Dishwashers Note To allow proper filling of the Rinse Aid Dispenser; Rinse Aid should only be added with the door in the fully open position. 4.4 Heaters During the main wash and final rinse portions of a wash cycle, the water is heated to the program...

Technical Information G600 & G800 Electronic Dishwashers 4.4.2 Flow Through Heater: The Flow Through Heater Assembly is mounted on the (left side) exterior of the wash cabinet. The Flow Through Heater is plumbed into the water path between the Circulation Pump Output and the Middle Spray Arm. Th...

Technical Information G600 & G800 Electronic Dishwashers 4.5 Heater Circuit - Operation Figure 4-4: Heater Circuit 29

Technical Information G600 & G800 Electronic Dishwashers 4.6 Pulsed Heating - Operation In certain programs the heating may be operated at full power until a water temperature of 77°F is reached; then power is applied in pulses. This extends the heating time and allows enzyme-containing detergen...

Technical Information G600 & G800 Electronic Dishwashers 4.9 Spray Arms The circulation pump (M6) moves the wash water from the sump through the Filter Assembly and to the Spray Arms. The water pressure causes a propulsion effect causing the Spray Arms to rotate. 4.9.1 Spray Arms - Rotation Data...

Technical Information G600 & G800 Electronic Dishwashers detergent should fall into the Microfine Filter, it remains on the Filter Cap, where it can dissolve, instead of collecting in the drain outlet. Foreign bodies which pass the Coarse Filter to the Microfine Filter collect on the Filter Cap ...

Technical Information G600 & G800 Electronic Dishwashers 4.13 Flowmeter - Operation The incoming water turns an impeller that contains a magnet located in the Flow Meter Axle. As the impeller turns, an external Reed Switch is switched on / off by the effect of the magnet. The electronic monitors...

Technical Information G600 & G800 Electronic Dishwashers 4.14 Water Intake If the water pressure is low, the electronic can be programmed to increase the allotted intake duration from 2 minutes, to up to 4 minutes. For further information refer to the section 6 Fault Diagnosis. 1 Input - Ion exc...

Technical Information G600 & G800 Electronic Dishwashers 4.15 Water Mixing 4.15.1 Water Mixing - External Flowmeter Refer to figure 4-9. The main water flows into the WaterProof system (Item 10), to the Water Intake Assembly where it passes a Non-Return Device (Item 6). The Non Return Valve prev...

Technical Information G600 & G800 Electronic Dishwashers 4.15.2 Water Mixing - Integrated Flowmeter 1 Drain pump 2 Sump 3 Sump - Soft water intake 4 Water softener - Soft water outlet 5 Solenoid valve Y2 (WPS) 6 Water inlet mixer 7 Water inlet mixer intake and outlet 8 Control valve Y6 - Steam c...

Technical Information G600 & G800 Electronic Dishwashers 4.17.1 Reactivation The electronic unit activates the Softener Valve (Y38/1) and water from the Water Intake Assembly flows into the Salt Container, where it dissolves a quantity of salt to become a brine mixture. The saturation point, abo...

Technical Information G600 & G800 Electronic Dishwashers 4.17.2 Reactivation Cycles Water Hardness Number of Program sequences before reactivation (Universal 650C) Parts per Million Grains per Gallon Normal Water Quantity Increased Water Quantity 18 to 71 1 to 4.1 18 12 89 to 107 5.2 to 6.2 13 8...

Technical Information G600 & G800 Electronic Dishwashers 4.18 Condenser Drying (UKT) Does not apply to all dishwasher models 4.18.1 Operation An air inlet port is located on the back / left area of the cavity ceiling. An air duct is fitted to the port and attaches to the Condenser Assembly. Duri...

Technical Information G600 & G800 Electronic Dishwashers 4.18.3 Control Valve Refer to figure 4-15… The Miele Circulation Condenser Drying System consists of a Steam Condenser (Item 4), with Circulation Fan. The Steam Condenser contains a Cold Water Reservoir over which an air duct passes and mo...

Technical Information G600 & G800 Electronic Dishwashers 4.19 Drain Pump, Circulation Pump The Drain Pump (M8) is located below the cabinet and connects to the right / front of the Sump. The Pump removes the wash water through the Non-Return Valve and Drain Hose to the on-site drain. The Drain P...

Technical Information G600 & G800 Electronic Dishwashers 4.22 Temperature Sensor The Temperature Sensor R30 (NTC resistor) is located in the bottom area of the Sump. The Electronic Unit constantly monitors the water temperature using the resistance value of the sensor. If the resistance is less ...

Technical Information G600 & G800 Electronic Dishwashers 4.23 Top Solo Valve Refer to figure 4-19. If the Top Solo option is selected, water is directed to the Top and Middle Spray Arms only. The Top Solo Valve (Y27) is located between the Circulation Pump and the Sump within the plumbing circui...

Technical Information G600 & G800 Electronic Dishwashers 4.24 Turbidity Sensor (ECO Sensor) Certain model dishwashers are equipped with a Turbidity (ECO) Sensor. The Sensor is comprised of a Phototransistor that emits a beam of light through the water path. On the opposite side of the sensor is ...

Technical Information G600 & G800 Electronic Dishwashers The sensor is located within the plumbing connection between the Circulation Pump and Top Spray Arm. In order to compensate for residues on the sensor and ageing of the optical system, the Turbidity Sensor is re-calibrated automatically ev...

Technical Information G600 & G800 Electronic Dishwashers 4.25.1 Programming After Replacing the Electronic In addition to Intake Duration and Water Softener Settings certain dishwasher Electronics need to be programmed for the width of the dishwasher (45 cm or 60 cm). For further information ref...

Technical Information G600 & G800 Electronic Dishwashers 5.0 Service and Maintenance 5.1 Locking Plate - Adjustment Figure 5-1: Locking Plate 1. Loosen the two Screws (Item 1). 2. Adjust the Locking Plate in the direction of the arrow as required 3. Tighten the Screws. 5.2 Cabinet Seal - Replace...

Technical Information G600 & G800 Electronic Dishwashers 5.3 Side Panel - Removal Figure 5-3: Side Panels and Cabinet Refer to figure 5-3 With the appliance removed from it’s installation location 2. Remove the raised head screws (Items 1 and 3). 3. Open the Door. 4. Remove the Raised Head Screw...

Technical Information G600 & G800 Electronic Dishwashers 5.4 Spring Bracket - Replacement Figure 5-4: Side View, Door with Bracket 1. Remove the Side Panels (5.3) 2. Fold up the Mineral Wool Matting (depending on model). 3. Hold the Spring with one hand and pull it down. 4. Release the Cable fro...

Technical Information G600 & G800 Electronic Dishwashers 5.5 Cover Plate - Removal Figure 5-5: Cover Plate 1. Remove the two Screws and the Plinth (Toekick). 2. Remove the Raised Head Screws, (Figure5-5 – Item 1). 3. Tilt the Cover Plate forwards slightly and lift its bottom edge out of the Drip...

Technical Information G600 & G800 Electronic Dishwashers 5.6 Connecting Strip - Removal Figure 5-6 : Plinth area with Connecting Strip 1. Remove the Cover Plate (5.5). 1. Remove the Raised Head and Countersunk Screws (Figure 5-6 – Item 1). 2. Remove components from the Connecting Strip. 4. Remov...

Technical Information G600 & G800 Electronic Dishwashers 5.7 Basket Support Rollers – Replacement Figure 5-7: Basket Guide Warning! Do not attempt to pry the Basket Guides free with a screwdriver; this will result in irreversible damage to the cabinet walls. 1. Slide out the Basket Guide (Figure...

Technical Information G600 & G800 Electronic Dishwashers 2. Insert a small screwdriver under the Clip between the Bolt on the cabinet wall and the Basket Guide and remove the Clip upwards. 3. Remove the Basket Guide. Figure 5-9: Basket Guide Stopper 4. Bend open the Holder Tag for the Rear Stopp...

Technical Information G600 & G800 Electronic Dishwashers 5.8 Combination Dispenser - Removal Figure 5-11: Exterior view of the Inner Door Panel 1. Remove the Outer Door Panel (5.10). 2. Disconnect all Electrical Plugs; and Hose – if fitted with a Fan. Service Tip To help avoid incorrect connecti...

Technical Information G600 & G800 Electronic Dishwashers 5.9 Turbothermic Fan - Removal 1. Remove the Outer Door Panel (5.10). 2. Remove the Control Panel. 3. Remove the Fixing Bracket. Components can remain on the Fixing Bracket (i.e. Electronic Unit, Handle) Figure 5-12: Fan Removal 4. Disconn...

Technical Information G600 & G800 Electronic Dishwashers 5.10 Door Panel (Outer and Inner) - Removal Note This procedure does NOT apply to Pre-Finished models. To Remove the Outer Door Panel 1. Remove the GDU or Custom Panel 2. Open the front door. 3. While supporting the Outer Door Panel; remov...

Technical Information G600 & G800 Electronic Dishwashers 5.11 Cable Holder - Removal Figure 5-14: Cable Holder Removal Refer to figure 5-14. 1. Remove the Outer Door Panel (5.10). 2. Open the Cable Holder Cover with a screwdriver. 3. Remove the Raised Head Screw (Figure 5-14 – Item 1). 4. Remove...

Technical Information G600 & G800 Electronic Dishwashers 5.12 Lock / Handle Assembly – Removal Figure 5-15: Lock Removal Caution Ensure the power is disconnected at the wall outlet; by shutting off the appropriate circuit breaker 1. Remove the Outer Door Panel (5.10). 2. Remove the Control Panel...

Technical Information G600 & G800 Electronic Dishwashers 5.13 Door Hinge - Removal Refer to Figure 5-16. 1. Remove the Side Panel (5.3). 2. Remove the Outer Door Panel (5.10). 3. Remove the Tensioning Spring (5.4). Figure 5-16: Hinge Removal Warning! Ensure the Door is held in position; and supp...

Technical Information G600 & G800 Electronic Dishwashers 5.14 Door Tension - Adjustment 1. Open the Door. 2. Locate the Spring Adjustment Screw on the left side of the dishwasher at the top front edge – as shown in Figure 5-17. 3. Use a Torx 20 screwdriver to adjust the Screw as follows: ƒ Clock...

Technical Information G600 & G800 Electronic Dishwashers 5.15 Top Spray Arm - Removal 1. Open the Door. 2. Press the Top Spray Arm upwards to engage it. 3. Unscrew clockwise. 5.16 Middle Spray Arm - Removal 1. Open the Door. 2. Remove the Upper Basket. 3. Press the Middle Spray Arm upwards to en...

Technical Information G600 & G800 Electronic Dishwashers 5.19 Middle Spray Arm Cover - Removal Figure 5-18: Middle Spray Arm Cover Removal 1. Insert a large screwdriver between the Cover Retainer and the Metal Holder on the rear of the cabinet wall – see figure 5-18. 2. Unclip the Spray Arm Cove...

Technical Information G600 & G800 Electronic Dishwashers 1 3 2 1 – Seal 2 – Flow Through Heater 3 – Temperature Limiters Figure 5-20: Flow-Through Heater with Seal (Item 1). 5.22 Temperature Limiter - Replacement 1. Remove the Left Side Panel (5.3). 2. Disconnect the Temperature Limiter Electric...

Technical Information G600 & G800 Electronic Dishwashers 5.23 Microfine Filter – Exchange Refer to figure 5-21. 1. Open the Door. 2. Remove the Filter Assembly from the dishwasher. Figure 5- 21: Microfine Filter – Replacement 3. Cut the old Filter combination apart at the Snap Fitting between th...

Technical Information G600 & G800 Electronic Dishwashers 5.25 WaterProof System (WPS) Restrictor - Exchange 1. Shut off the water supply. 2. Disconnect the WPS at the plumbing supply connection. 3. Remove the Sealing Washer and Filter from inside the WPS connection 4. Using a 5mm nut-driver; pre...

Technical Information G600 & G800 Electronic Dishwashers 5.27 Water Softener – Operational Check Service Tip Ensure the Electronic is programmed “with Water Softener” before performing the following procedure. 1. Refer to the model specific Operating Manual; Program the Electronic to the 643 ppm...

Technical Information G600 & G800 Electronic Dishwashers 5.28 Water Softener Assembly- Removal 1. Open the Door; remove the Salt Container Cap and Sealing Ring. Remove any excess water / brine as necessary. 2. Remove the Right Side Panel (5.3). 3. Note the location of the Hoses on the Water Inta...

Technical Information G600 & G800 Electronic Dishwashers 5.32 Steam Condenser - Removal 1. Remove the Left Side Panel (5.3). 2. Open the Door. 3. Unscrew the Top Air Duct Cap (Intake Connection). 4. Unscrew the Bottom Air Duct Cap from the Steam Condenser (Bayonet Connection). 5. Remove the Top ...

Technical Information G600 & G800 Electronic Dishwashers 5.35 Circulation Pump (M6) - Removal Refer to figure 5-28 1. Remove all water from the Sump. 2. Remove the Fixing Bolt (Item 5), from the Casing Rear Panel (Item 4). Figure 5-28: Circulation Pump – Removal 3. Lay the dishwasher on its back...

Technical Information G600 & G800 Electronic Dishwashers 5.37 Circulation Pump Housing - Exchange 1. Remove the Circulation Pump (5.35). 2. Remove the four (4) Screws from the pump housing. 3. Fit the new Pump Housing and O-ring. 5.38 Circulation Pump – Release with Tool 1. Open the Door. 2. Rem...

Technical Information G600 & G800 Electronic Dishwashers Figure 5-32: Turning the Circulation Pump Tool 5. Carefully turn the Releasing Tool back and forth about its axis to release the Pump Impeller. Service Tip The Circulation Pump Releasing Tool (P/N 05585740) can be obtained by contacting th...

Technical Information G600 & G800 Electronic Dishwashers 5.40 Drain Pump (M8) – Removal Refer to figure 5-34. 1. Remove as much water as possible from the Sump. 2. Remove the Cover Plate (5.5). 3. Disconnect the Electrical Connection (Item 1). 4. Release the Locking Retainer (Item 4). 5. Turn th...

Technical Information G600 & G800 Electronic Dishwashers 5.41 Top Solo Valve - Removal 1. Remove the Circulation Pump (5.35). 2. Disconnect the Electrical Connection. Warning It is essential to note correct position of the Valve before removal. (The direction of flow is marked by an arrow on the...

Technical Information G600 & G800 Electronic Dishwashers 5.42 Overflow Level Switch - Removal Refer to figure 5-36 1. Remove as much water as possible from the Sump. 2. Remove the Cover Plate (5.5) 3. Locate the Overflow Level Switch mounted on the right / rear side of the Connecting Strip. 4. P...

Technical Information G600 & G800 Electronic Dishwashers 5.43 Sump - Removal 1. Remove as much water as possible from the Sump. 2. Open the door; remove the Bottom Spray Arm (5.17) and Filter Assembly. 3. Lay the dishwasher on its back. 4. Remove the Drip Tray (5.30) 5. Remove the Circulation Pu...

Technical Information G600 & G800 Electronic Dishwashers 5.44 Turbidity Sensor - Calibration After installing a new Electronic and / or Turbidity Sensor the dishwasher must be run through a complete program without any dishes. Service Tip If the above procedure is carried out with dirty dishes; ...

Technical Information G600 & G800 Electronic Dishwashers 5.48 Fixing Bracket – Removal Service Tip The Fixing Bracket is removed to access to the following components: ƒ Turbothermic Fan / PTC Release ƒ On / Off Button ƒ Door Handle / Lock Assembly ƒ Electronic(s) B A Figure 5-41: Removing the F...

Technical Information G600 & G800 Electronic Dishwashers 5.49 Heating Relay & Power Relay – Removal Service Tip Make note of wiring position for re-installation. 1. Remove the Left Side Panel (5.3). 2. Locate the Relay (location varies by model number). 3. Remove the Relay Bracket Screw and ...

Technical Information G600 & G800 Electronic Dishwashers 6.0 Fault Diagnosis 6.1 General Information Every electronic controlled Miele dishwasher has three modes accessible for services purposes: ƒ Programming Mode ƒ Service Mode One ƒ Service Mode Two 6.2 Programming and Service Mode - Features...

Technical Information G600 & G800 Electronic Dishwashers 6.2.4 Buzzer (As Applicable) Applies only to fully integrated (Vi) dishwashers (except Plus series). Can be used to add an audible alarm at the end of the program. 6.2.5 Fault Code (Retrieval) Stores the last fault registered, to assist in...

Technical Information G600 & G800 Electronic Dishwashers 6.2.9 Width of Unit (As Applicable) Some Electronic Units can be installed in more than one specific model number; and therefore require programming the width of the dishwasher it is being installed in. Refer to the model Specific Programm...

Technical Information G600 & G800 Electronic Dishwashers 6.4 Timing Charts – General Information 101

Technical Information G600 & G800 Electronic Dishwashers A Timer Steps Run along the left and right side of the chart numbered 1-50. All fifty steps do not apply to every program, refer to E and F for further information. B The component names and Wiring Diagram Legends are listed here. Below th...

Technical Information G600 & G800 Electronic Dishwashers C Time Column , indicates the length in time the step occurs. Minutes are on the left side of the column, while seconds are displayed on the right side of the column. “ZT #” refers to a Thermal-Stop, see details below… D Timer Step Explain...

Technical Information G600 & G800 Electronic Dishwashers E Program Choices and steps performed… Understanding the steps performed ƒ Clear (White) Blocks indicate the step is performed. ƒ Black Blocks indicate the step is not performed. Additional details on step can be found at the bottom of the...

Technical Information G600 & G800 Electronic Dishwashers 6.5 Wiring Diagrams – General Information 1 Electronic Assembly (Circuit Boards) 2 Molex Plug Connectors (framed by dotted lines) 3 “Current Path” to identify the location of the component along a numbered line. (Example: Water Inlet Valve...

Technical Information G600 & G800 Electronic Dishwashers 6.7 Fault Repair Door does not close correctly ƒ Incorrectly fitted Stopper at end of Top Basket Guide. - Remove the Stopper and fit it correctly (5.7). ƒ Door Seal incorrectly fitted and protrudes forwards. - Remove the Door Seal and fit ...

Technical Information G600 & G800 Electronic Dishwashers Water leaks from the Turbothermic Fan Grille ƒ Hose between Fan and Dispenser is blocked - Inspect Hose and replace as necessary (5.9) ƒ The PTC Flap is not closing correctly - Inspect Flap – replace the Turbothermic Fan as necessary (5.9)...

Technical Information G600 & G800 Electronic Dishwashers Water not heating ƒ One of the Temperature Limiters is not functioning - Check the Temperature Limiters Warning! Before resetting the Temperature Limiter, it is essential to check why it has cut-out! ƒ Flow-Through Heater not functioning -...