Miele G 7856 - Manuals

~ In critical applications where very stringent requirements must be met, itis highly recommended that all relevantfactors for the process, such ascleaning agent, quality of water, etc.,be discussed with a Miele ApplicationSpecialist. ~ The special inserts should only be used for their specific appl...

a Connection for DOS unit G 60 Dosage pump for liquid detergents -optional(located on the rear side of themachine) b Filter combination c Salt reservoir (water softener) d Compartment for powder detergent e Rinse aid reservoir (with dosage selector) Guide to the machine 8

This Miele machine is a commercialdishwasher with fresh water washsystem and short batch times. It isespecially suitable for use where quickturn-around flexible wash programs,and commercial durability are of theutmost importance. The dishwasher is equipped with awater softener as a standard. Descrip...

To open the door ^ Press the door button, hold the doorgrip and pull open the door at thesame time. The door should only be opened duringoperation for emergencies, e.g. if itemsare knocking together or if a programfault is indicated in the display. See"Canceling a program". , Do not touch th...

Water Softener To avoid the build-up of calciumdeposits on items being cleaned and inthe machine the water needs to besoftened. To ensure a steady supply of soft waterthe water softener unit must always be: 1. correctly set for the water hardness level in your area. 2. the salt reservoir must be fil...

Table of settings °d (German scale) gr/gal Setting 123456789 101112131415161718 19 *) 2021222324252627282930313233343536373839404142434445 123456789 101112131415161718192021222325262728293031323334353637383940414243444546 123456789 10111213141516171819202122232425262728293031323334353637383940414243...

Filling the salt reservoir Only special, coarse-grainedreactivation salt* should be used inthis machine. *Available from Miele. Please seeback page for contact information. Do not use other types of salt, e.g. tablesalt, agricultural or gritting salt. Thesecould contain components which areinsoluble...

Salt indicator When the salt reservoir is empty the"Recharge" indicator, b , lights as a reminder to fill the reservoir. Reactivation takes place automaticallyduring a program. The "Recharging"indicator, a , lights while this is occurring. Water softener 15

Rinse aid is needed to prevent spottingon dishes and glassware.The rinse aid is filled in the reservoirand the set amount will beautomatically dispensed during the finalrinse. The reservoir holds about 125 ml. , Inadvertently filling the rinse aid reservoir with detergent (liquid or powder detergent...

^ Add rinse aid until it is visible on thesurface of the filter in the opening. ^ Close the flap until it clicks into place.Make sure it is firmly shut, otherwisewater could get into the rinse aidreservoir during the program. ^ Clean up any spilled rinse aid toprevent over-foaming during the nextpro...

Loading the machine Preparation ^ Empty all containers before loadingthem into the machine. , Ensure that no acid or solvent residues, especially hydrochloricacid or chlorides get into the washcabinet. Notes ^ Load items so that water will comeinto contact with all surfaces. Thisensures that they wi...

Items not suitable fordishwashers ^ Cutlery with wooden or horn handles ^ Wooden or plastic cutting boards ^ Glued items, e.g. old knives withhandles which have been glued on ^ Hand-made craft items ^ Copper or tin items ^ Plastic items which are not heatresistant Please note ^ Silver and aluminum i...

Adjusting the upper basket The upper basket can be adjustedabove and below the middle positionby 1" (2.5 cm). It is set in the middleposition on delivery. Depending on the position of the upperbasket, a variety of plate dimensionscan be accommodated in the baskets. For example: If the upper bask...

, Only use cleaning agents formulated for this machine. Do not use detergents formulatedfor domestic dishwashers. Powder cleaning agent is dispensed via the compartment for powdercleaning agents in the door. Liquid cleaning agents are dispensed via the DOS-Module (available as anoptional accessory)....

"Rapid" program ^ If liquid cleaning agent is not beingused, add powder detergent directlyto the inside of the door for thisprogram. A different combination of cleaningagents and other additives may benecessary for special soiling. ContactMiele fore more information. Note This machine can be...

Turning on ^ Close the door. ^ Open the water supply (if closed). ^ Press the On / Off (I-0) button. If the program selector is turned to"Stop" a dot lights in the display. Starting a program ^ Turn the program selector clockwiseor counterclockwise to the requiredprogram. See the "Progra...

Selecting an additionalfunction "Extra drying" can be selected as anadditional function. ^ Select the drying function directlyafter a program has been selected(not with "Rapid", "Rinse" and "Drain"). Drying is phased over 10 minutes. Thetotal running time of the progr...

Changing a program If the "Start" button has not yet beenpressed, the selected program can bechanged. ^ Turn the program selector to thedesired program. ^ If required select the additionalfunction "Extra Drying" again. See"Selecting an additional function". ^ Press the "S...

Program When to use Program cycle Pre- wash 1 2 Main wash 1) Interim rinse 1 2 3 3) Final rinse 1) Drying (Option. funct.) CHINA +CRYSTAL120°F For temperature sensitive glasswareand lightly soiled dishware.Run-time: ~ 12 minutes*(plus 10 minutes for optional drying) X X (X) X (X) RAPID130°F Rapid pr...

Every change of the factory settingshould be documented in case ofpossible technical service.Record any changes in the field"Adjusted value___________". 1. Setting the cold water inlet from:"Nominal water intake" to "Nominalwater intake + 1 l". The amount of water taken into ...

Setting the dosage Set the dispensing amount accordingto the detergent manufacturer'srecommendations and theapplications. The machine needs 7 liters of water inthe program cycle "Main wash". Example: The detergent manufacturerrecommends 4 ml of detergent per literwater.7 l x 4 ml/l = 28 ml.2...

5. Altering the cleaning temperatureand/or the temperature holding timein the "Main Wash" and "Finalrinse"stage of the program cycle Any changes to the washtemperature and/or the temperatureholding time should be recorded inthe program chart . The main wash and final rinsetemperature...

^ Temperature "Final rinse": Turn the program selector to the"STOP" position (the programminglevel is displayed in this positiononly). ^ Press "Extra Drying" again. "E05"(programming level 5) is displayedfield. ^ Turn the program selector to theprogram to be changed. ...

6. Delay start and setting the delaystart time The start of a wash program can bedelayed up to 9 hours and 30 minutesin 30 minute increments. Delay start should only be selected withthe "Normal" and "Intensive" programs.The short programs cannot guaranteesatisfying cleaning results w...

Filter combination , The machine must not be used without all filters in place. The filtersprotect the circulation pump fromdamage caused by foreign objects. The filter combination in the base ofthe wash cabinet should beinspected regularly and cleaned ifnecessary. Caution: Watch out for sharp objec...

Cleaning the non-return valveand drain pump If water has not been pumped away atthe end of a program, the drain pumpor non-return valve may be blocked. ^ Turn off the washer. ^ Remove the filter combination fromthe wash cabinet. ^ Tilt the locking clamp to the side. ^ Pull out the non-return valve a...

Cleaning the filters in the waterinlet Filters are incorporated in the screwconnection of the water inlet hose toprotect the water inlet valve. If thesefilters become dirty they need to becleaned, otherwise insufficient waterflows into the wash cabinet. , The plastic housing of the water connection ...

With the aid of the following notes,minor faults can be corrected withoutcontacting the Miele ServiceDepartment. Any work on the electricalcomponents of the machine shouldonly be carried out by a qualifiedand trained person in accordancewith local and national safetyregulations. Unauthorized repairs...

Water in the wash cabinet is notheated / the program sequence laststoo long This machine has a resettable heaterlimiter which will switch off the heatersin the case of over-heating. This couldbe caused, for example, by largearticles obscuring the heating elementsor when the filters in the wash cabin...

In the event of a fault which you cannotcorrect yourself or if the fault code "F..."shows in the display please contact theMiele Service Department at the phonenumber on the back of theseinstructions. ^ Please quote the model and serialnumber of your machine. This information can be found on...

Installation Instructions To prevent accidentsand machine damageread these instructions before installation or use.

Disposal of the packingmaterial The protective packing materials areenvironmentally safe and can berecycled. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children.Danger of suffocation! Disposal of the appliance Appliances contain materials which ca...

Please refer to the installationdiagram supplied with the machine. , Furniture and fittings installed near the machine must be of acommercial standard, able towithstand the effects of steam andcondensed water. Installation options – Free-standing – Undercounter The machine should be positionedunder ...

Leveling the machine Any unevenness in the floor can becompensated for. ^ Adjust the four screw feet to raise orlower the height of the machine. Position and secure themachine To ensure stability the machine mustfirst be aligned and then screwed to thecountertop. ^ Open the door. ^ Through each of t...

, All electrical work must be carried out by a suitably qualifiedperson in compliance with local andnational safety regulations. A damaged power cord must onlybe replaced with a genuine Mielecord by a Miele Service Technician. ^ For technical data see the data plateor wiring diagram supplied. The ma...

Removing the service panel and theprotective plastic cover , Isolate the machine from the power supply. ^ Holding the service panel on bothsides, pull gently outwards frombeneath, a , and remove it, b . ^ Remove the protective plastic coverand unscrew the 2 screws (left andright), c . To reassemble:...

Connection to the water inlet , Water in the machine is not suitable for drinking. ^ The machine must be connected tothe water supply in accordance withlocal and national regulations. ^ The machine is constructed tocomply with Canada regulations, andmay be connected to a suitablesupply without an ex...

Drainage ^ The drainage system is fitted with anon-return valve which prevents dirtywater from flowing back into themachine via the drain hose. ^ The machine should preferably beconnected to a separate drainage system onsite.If separate drainage is not availablecontact your Miele applicationspeciali...

English Metric Height: 33 ½ " (32 1 / 4 ") 85 (82) cm Width: 23 5 / 8 " 60 cm Depth: 23 5 / 8 " 60 cm Voltage: see data plate Rate load: see data plate Fuse rating: see data plate Connection cable: approx. 5' 10" 1.8 m Water pressure(flow pressure): 7.25 - 145 PSI 50 - 1000 kPa C...