Miele ESW48XX - Manuals

Safety ~ Protect your hands with oven mitts or potholders when using theappliance. Use only dry, heat resistantpotholders. Moist or damp potholdersused on hot surfaces can result insteam burns. ~ Be aware of loose fitting or hanging clothing while using the warmingdrawer. They may present a fire haz...

ESW 408x-14 a Control panel b Non-slip mat Guide to the warming drawer 7

Control panel On/Off Turns the warming drawer On and Off Menu Allows you to select the operatingmode Operating modes: / Cups/glasses H Tableware 2 Food - warm and hold Temp. Allows you to select the desiredtemperature. The display shows: ] ^ ^ ^ ^ See "Temperature settings" for moreinformati...

When first connecting the appliance tothe power supply and after a powerfailure, the fan will run and a displaytest will be carried out forapprox. 10 seconds. The appliancecannot be used during this time. Clean the appliance ^ Remove any protective wrapping. ^ Remove the non-slip mat and cleanwith a...

Operating modes Tap the " Menu " touch control until the desired operating mode lights: – / Cups/Glasses – H Tableware – 2 Food - warm and hold The last operating mode selectedappears in the control panel when thedrawer is turned on. The warming drawer is equipped with afan which distributes...

Temperature settings Each operating mode has an assigned temperature range. The suggested temperatures are set by default, they aremarked in bold in the table below. Use the " Temp. " touch control to change the setting in increments. The last selected temperature is shown in the control pan...

Duration The warming drawer is set forcontinuous operation by default. Byselecting the " Timer " touch control a warming time can be set. With each tapof the " Timer " touch control the duration will increase in one hour increments,beginning with 1 hour and ending with4 hours. Select...

Sabbath Mode For religious observance, the appliancecan be set for the duration of theSabbath. In Sabbath mode the timer isdeactivated and the sensors have to betouched longer than ususal. If Sabbathmode is activated, the appliance willturn off after approx. 72 hours, thenautomatically reset to norm...

The drawer load will depend on the type and size of yourdishes. The maximum load is 55 lbs (25 kg).Do not overload the drawer. To increase the load space use the supplied rack.Two racks will fit in the drawer at one time. Additional racksare available from Miele. ESW 408x-14 ESW 47xx / ESW 48xx Load...

Tips The warming drawer is intended forkeeping food warm directly afterpreparation. It is not intended tore-warm cold meals. – To ensure that the minimum temperature of 150°F (65°C) requiredto keep food warm is met, select 2 . – Preheat the warming drawer for approx. 15 minutes to guarantee thatthe ...

Settings Food Type of container Lid on container Temperature for 2 setting Position in drawer Floor Rack* Bacon Plate no ^ ^ ] ^ ^ x x Beef**Rare / Medium / Well Pan yes ] ^ ^ ^ ^ x x Bread hard rolls Plate no ^ ^ ^ ^ ] x x Bread soft rolls Plate yes ^ ^ ^ ^ ] x Casserole, crisp top Plate / Casserol...

Tips – Distribute tableware throughout the entire drawer. Stacked plated willheat up more slowly than individualpieces. If stacking is unavoidableplease them in the front of thedrawer. Use the rack (depending onmodel). – Do not place platters right up against the vents. They may cover the warmair ou...

The warming drawer can also be usedto proof yeast dough or to warm orcrisp bread. Proofing dough ^ Open the drawer. ^ Turn the appliance on " On/Off ". ^ Touch " Menu " to select the " / Cups/Glasses" setting. ^ Touch " Temp ." to select the ] ^ ^ ^ ^ temperature sett...

Allow the appliance to cool beforecleaning. Do not use a steam cleaner to cleanthis appliance. Pressurized steamcould penetrate electricalcomponents and cause a shortcircuit. Do not use commercial cleaningagents. Only use agentsrecommended for domestic use. Appliance front / interior Remove spills a...

, Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairscould cause injury or appliance damage. What if the drawer does not heat? Possible fault Solution There is no power to the warmingdrawer. Insert the plug int...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this booklet. When contacting Technical Serviceplease quote the serial number andmodel of the appliance. Thisinformation is visible on the silver dataplate s...

Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE Information is subject to change.Please refer to our website to obtain the most current product specification,technical & warranty information. To prevent accidentsand machine damageread these instructions before ...

~ Before installation make sure that the voltage and frequency listed on thedata plate correspond with thehousehold electrical supply. This datamust correspond in order to avoid riskof damage to the appliance. If in doubt,consult a qualified technician. ~ The electrical outlet should be easily acces...

Miele appliances can be installed flush or proud. Discuss your installationrequirements with your architect, designer and installer. Combination possibilities Installation with an oven a Cut-out for venting the oven * Machine with glass front ** Machine with stainless steel front ESW 408x-14 25 (734...

Installation with a speed oven * Machine with glass front ** Machine with stainless steel front ESW 408x-14 26 (560 mm -568 mm) (455.5 mm) (22*/23**mm) (593 mm - 595 mm) (541 mm) (595 mm) (548 mm) (141 mm) (537 mm) (595 mm) (7 mm) 23 3/8" - 23 7/16" 22- 22 3/8" 1/16" 21 (446 mm) (560...

Installation with a steam oven * Machine with glass front ** Machine with stainless steel front ESW 408x-14 27 (560 mm-568 mm) (455.5 mm) (22*/23**mm) (593 mm - 595 mm) (444 mm) (595 mm) (548 mm) (141 mm) (537 mm) (595 mm) (7 mm) 23 3/8" - 23 7/16" 22 - 22 3/8" 1/16" 21 (446 mm) (549...

Installation with a coffee machine * Machine with glass front ** Machine with stainless steel front ESW 408x-14 28 (560 mm - 568 mm) (455.5 mm) (20 mm) (593 mm - 595 mm) (460 mm) (595 mm) (548 mm) (141 mm) (537 mm) (595 mm) (7 mm) 23 3/8" - 23 7/16" 22 - 22 3/8" 1/16" 21 (446 mm) (55...

Miele appliances can be installed flush or proud. Discussyour installation requirements with your architect, designerand installer. Check that the base of the warming drawer is clean andlevel. Only then will it function properly. When inserting the appliance, wear work gloves to avoidinjuries. ^ Pus...

Aligning the appliance front After installation it may be necessary to align the appliancefront and/or the gap between the appliances/furniture frontabove. ^ Remove the screws a from the left and right sides of the drawer front. ^ Carefully lift the control panel out of the drawer. Be carefulnot to ...

Integrated installations Custom made front panels can be installed with modelsESW 4702 FB and ESW 4802 FB. The custom panel must be at least 3 / 8 " (19 mm) thick and made of heat resistant material 140 °F (60 °C). The frontpanel, including handle, must not exceed 11 lb (5 kg) inweight. ^ Instal...

, CAUTION: Before servicing, disconnect the power supply byeither removing the fuse, shutting offthe power main or manually"tripping" the circuit breaker. Installation work and repairs shouldonly be performed by a qualifiedtechnician in accordance with allapplicable codes and standards.Repai...

Disposal of packing materials The cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children.Danger of suffocation! Disposal of an old appliance Old appliances contain ma...